Sharif Digital Repository

Repair welding is one of the important maintenance processes that include build-up welding and surfacing.In this study, investigation of repair welding parameters has been conducted to achieve desired microstructure with the appropriate toughness and minimum residual stress.In this research, local post-weld heat treatment has been performed by Tungsten electrode arc on weld zone. Performing this process with optimum parameters leads to the best heat cycle with the tempered Martensite microstructure. Residual stress of the sample will be reduced. HAZ coarse grains will be refined to finer grains which result in to improved toughness and reduced hardness to the acceptable limit.
Results... 

In recent years, adjustable optical properties, simple and inexpensive synthesis, and excellent biocompatibility of carbon dots have attracted much attention. However, the widespread use of carbon dots in biomedical diagnostics, photoluminescence, and photocatalysis has been limited due to a lack of emission or excitation in the red or near-infrared region. Studies have shown that doping in carbon dots can affect the displacement and increase the light intensity. This study aims to use the engineering methods of optical properties of carbon points by doping heteroatoms and adjusting the surface state to synthesize biocompatible carbon dots with luminescence at long wavelengths with strong... 

In recent years, studies in luminescent carbon dots are overgrowing, the prominent features of carbon quantum dots include cheap and straightforward synthesis, excellent biocompatibility, and adjustable optical properties. However, the widespread use of carbon dots in biomedical diagnostics, photoluminescence, and photocatalysis has been limited due to a lack of emission and excitation in the red or near-infrared region.. However, the widespread use of carbon dots in biomedical diagnostics, photoluminescence, and photocatalysis has been limited due to a lack of emission and excitation in the red or near-infrared region. This research tried to produce carbon dots with redshift in emission... 

Novel zeolite-based micromotors consisted of silver-exchanged zeolite core and three different partial catalytic coatings (Mg/Au, Pt and Ag) were synthesized to eliminate the biological and chemical contamination from water in a fast and efficient way. These engines are benefited by the adsorption capacity and antibacterial activity of silver-zeolites in combination with the autonomous propulsion of catalytic micromotors. The remarkable bactericidal capacity of these particles relies on reactive silver ion released from zeolite and accordingly, increased chance of contact with bacteria during movement. These motors showed rapid killing of bacteria and effective elimination of the Pseudomonas... 

In this study magnetite nanoparticles were synthesized by microemulsion and were coated with TiO2 by a precipitation technique. The synthesize process were done under fixed molar ratio of various constituents of microemulsion and molar ratio of water to oil. Results of X-ray diffraction spectroscopy (XRD) showed that the uncoated nanoparticles were consisted of magnetite as the major phase and no other detectable phases such as pure iron or hematite were found. Field emission scanning electron microscopy (FE-SEM) results showed that the synthesized nanoparticles small size and narrow particle size distribution. For TiO2 coating process the effect of TBOT concentration, water concentration,... 

Iron oxide nanoparticles were synthesized using microemulsion technique as MRI contrast agents. Utilization of nanoparticles for biological applications and in this case as MRI contrast agents needs particles to be of small size and also narrow size distribution. For this aim, the effect of several parameters on size and size distribution has been studied. These parameters include water/surfactant ratio, precursor’s concentration and amount of polymer employed to improve nanoparticles colloidal stability. XRD, FE-SEM and TEM results reveal that the synthesized nanoparticles had small size (about 10 nm iron oxide core and 20 nm overall diameter) and possessed narrow size distribution (15-21... 

The aim of this project is the surface modification of super para magnetic iron oxide (SPIONs), leading to oriented covalent bonding of antibody(AB) to these nanoparticles (NPs) and improve the efficiency of cell separation at MACS columns. For this purpose, SPIONs synthesized by co-precipitation method, and the stability of colloidal NPs then was provided by coating with Dextran . We used TGA to measure weight percentage of dextran. Some properties like particle size, hydrodynamic diameter, presence of coating and superparamagnetic properties were characterized by XRD (16 nm), FTIR, DLS (73 nm), TEM (20nm) and VSM (≈76/78 emu/g) method, respectively. Then we tried to immobilize AB on NPs... 

In this research, a facile, two-step synthesis was reported for 34-LCysteine- nanocomposites. The first step comprises the preparation of LCysteine functionalized magnetic nanoparticles (MNPs) core-shell structures via co-precipitation method. In the second step, graphene quantum dots (GQDs), which were synthesized by citric acid carbonization, added to the functionalized MNPs and finally refluxed at the appropriate time and temperature. LCysteine as a biocompatible, natural amino acid were used to link MNPs with GQDs. This nanocomposite was characterized by various techniques. XRD and FT-IR were used to investigate the formation of MNPs and LCysteine existence on the MNPs surface. XPS... 

Our goal in this research is to fabricate janus micromotors capable of moving in aquious media and being manipulated by an external magnetic field. Such devices were made via attaching magnetic nanoparticles to the surface of magnesium janus motor. The FTIR study proved their existance and physical attraction to the surface of the motors. They were easily navigated through a static magnetic field and janus motors aligned their motion to the direction of magnetic field. The anisotropic geometry of janus micromotors were verified through scaning electron microscope and elemental analysis. Biocompatibility of magnetised janus motors were examined through mtt assay and it was shown that the... 

After restructuring in power systems, Independent System Operators (ISO's) are looked for an appropriate auction mechanism to find the market operation point. In deregulated electricity markets, Offer Cost Minimization (OCM) auction is used to minimize the total bid cost for selecting offer and demand bids. But a uniform market clearing price (MCP) or Locational Marginal Price (LMP) is used for consumer payments. Hence, the minimized bid cost is different from settlement cost. The used mechanisms are for manufactures offer and their cost functions optimization. The Payment Cost Minimization (PCM) is one of the mechanims that affect directly on the consumers payment and lead to reduction of... 

Recently, Aluminum alloys have been the materials of choice for both military aircraft and automotive industries due to their high strength-to-weight ratio, high electrical and thermal conductivities and excellent corrosive resistance. However, their applications have been limited due to the low yield stress and wear resistance. In order to improve the surface wear resistance, structural and chemical surface modifications such as producing composite coatings could be applied. Gas Tungsten Arc welding (GTAW) process can be used to produce alloy and composite surface layers on different substrates. In this research, GTAW process and aluminum cored wires were used for coating of Al/Al3Ti... 

Since recording first electroencephalogram (EEG) of human brain in 1929 until now it becomes as a powerful tool in neuroscience. At first information extraction was done by visionary approaches only. But because of some problems in the context of inaccuracy and also in analyzing data different methods were proposed in order to extract hidden information of EEG. Among these approaches Fourier transformation was suggested as a very useful method that could draw out so many characteristics of signal different frequency components. However this way had many faults that cause limitation in analyzing time series and as a result other methods have been considered. One method that later has been... 

Euthanasia is one of the most controversial topics in medical ethics and in the areas of religion, law and ethics are studied .Different approaches to the authorities in case of euthanasia on the ballot, specifically rooted in the philosophical approach, to their beliefs and culture. According to the above description. The main objective of this paper is to study the philosophical approach of euthanasia. Therefore, this text answer three main questions. The first question will be discussed in the first chapter is that "How general philosophical issues applied to specific cases such as euthanasia?" The second question is about the definition and types of euthanasia .This question will be... 

Logistics performance is one of important factors in economic growth of a country. Many firms in all over the world outsourcing their logistics activities to third party logistics companies (3PL) in order to gain higher performance and reduce time and cost of logistics services. Important role of 3PL companies and lack of them in Iran’s logistics industry were the main drives of this of this thesis. In this thesis after introduction and literature review, the main question of thesis will be defined this is about advantages of using 3PLs in Iran logistics industry and structure of them. To find the answer, based on information and statistical reports from world bank, Iran logistics... 

Single nucleotide polymorphs, There are changes caused by a mutation in a nucleotide in the Dena sequence. Mononucleotide polymorphisms are the most common type of genetic variation. Some of these changes have little or no effect on cells, while others cause significant changes in the expression of cell genes that can lead to disease or resistance to certain diseases. Because of the importance of these changes and their effect on cell function, the relationships between these changes are also important. Over the past decade, thousands of single disease-related mononucleotide polymorphisms have been identified in genome-related studies. Studies in this field have shown that the expression of... 

In the past few years, many research works on the controllable integration of metal nanoparticles and metal-organic frameworks were done, since the obtained composite material shows a synergism effect in catalysis and photocatalysis, drug delivery applications, gas, and energy storage, as well as sensing. For the first time, in this study, we employed template-assisted growth to synthesize Au-HKUST-1 Nanocomposite. XRD analysis entirely confirms that employing this strategy in synthesizing Au-HKUST-1 was wholly successful, and the plasmonic properties of this nanostructure were studied via UV-visible spectroscopy. In the course of synthesis, gold nanoparticles with 70nm diameter were... 

Nowadays, video streaming over peer-to-peer networks has become an interesting field to deliver video in large scale networks. As multi-channel live video streaming networks increase,distributing video with high quality among channels faces many challenges. The most significant challenges cause from frequent channel churns, unbalanced channel resources, network heterogeneity and diversity of users’ bandwidths. They include: nodes’ unstability, low users participations, large startup and playback delays, low video quality received by users and lack of resources in unpopular channels.In order to solve the above problems, we have proposed several solutions such as: 1- using distribution groups... 

The fast growth of social networks and their wide range of applications have made the anal-ysis of them an interesting field of research. The growth of concern in modeling large social networksand investigation of their structural features leads studies towards community detec-tion in such networks. In recent years, a great amount of effort has been done for introducing community detection algorithms, many of which are based on optimization of a global cri-terion which needs network’s topology. However, because of big size of most of the social networks , accessing their global information tends to be impossible. Hence, local commu-nity detection algorithms have been introduced. In this... 

Semi-supervised Learning (SSL) is an extremely useful approach in many applications where unlabeled data can be easily obtained. Graph based methods are among the most studied branches in SSL. Since neighborhood graph is a key component in these methods, we focus on methods of graph construction in this project. Graph construction methods based on Euclidean distance have the common problem of creating shortcut edges. Shortcut edges refer to the edges which connect two nearby points that are far apart on the manifold. Specifically, we show both in theory and practice that using geodesic distance for selecting and weighting edges results in more appropriate neighborhood graphs. We propose an... 

At first the killing vector fields will be investigated. Conditions are introduced for the hypersurface of a Riemannian manifold with a killing vector field to be equipped with the same killing vector field. Then 2-killing vector field is studied and its relation with killing vector fields and monotone vector fields is presented. After that conformal vector fields are discussed and conditions are introduced in order that the Riemannian manifold equipped with a conformal vector field, isisometric to n-dimensional sphere with constant curvature. Finally we will present the conditions which conformal vector field is a 2-killing vector field. Then we will present the results in which the...