Sharif Digital Repository

The final goal in a perforation operation is achieving the maximum production and reducing perforation damage, using optimal completion process. The Dynamic Underbalanced Perforation (DUP) as one of the more recent completion technologies minimizes or even eliminates the perforation crushed zone by optimizing the well's dynamic underbalance. Dynamic underbalance is a transient underbalance process that occurs immediately after creation of the perforation tunnels. The modeling of this process is essential in designing the optimal configuration of the perforation charges to evaluate the perforation efficiency. In this study we propose a novel and efficient numerical method, to optimize the... 

One of the main concerns in cladding Inconel 625 superalloy on desired substrates is deterioration of corrosion resistance due to cladding process. The present study aims to compare the effect of fusion cladding and explosive cladding procedures on corrosion behavior of Inconel 625 cladding on plain carbon steel as substrate. Also, an attempt has been made to investigate the role of load ratio and numbers of fusion layers in corrosion behavior of explosive and fusion cladding Inconel 625 respectively. In all cases, the cyclic polarization as an electrochemical method has been applied to assess the corrosion behavior. According to the obtained results, both cladding methods aggravate the... 

The authors regret to inform that there are inaccuracies in the email address and the affiliation of the third author (F. Madani Sani). The correct email address is: fazlollah.madani.sani@gmail.com. The correct affiliation is: ‘Department of Materials Science & Engineering, Sharif University of Technology, P.O. Box: 11365-9466, Azadi Ave., Tehran, Iran’. Author would like to apologize for the inconvenience caused. © 2017 Elsevier Ltd  

The purpose of this paper is to estimate the stiffness and strength of damaged rectangular reinforced concrete shear walls after an earthquake using surface crack patterns. Assessing the damage severity of buildings after an earthquake is an important part of the emergency inspection operation of buildings. Expert inspectors tag buildings into two categories of safe or unsafe that are usually affected by subjective decisions, which may result in catastrophic events reported in previous earthquakes. In this research, an extensive database on the images of damaged rectangular reinforced concrete shear walls (RCSWs) is collected and used to develop predictive equations for updated stiffness and... 

This paper is presenting the data on interactions between Fiber laser and shale. With this obvious goal that is dependent on improving the efficiency of laser power. The idea of selecting shale sample was because of variety of this rock type in Iranian oil and gas formations. In the experiment, a long pulsed laser beam was arranged to drill and propagate surfaces, in the opposite direction to the earth gravity, and it was used to drill hole from the top to the bottom of cylindrical Shale rock. The heat that been induced from the Fiber laser is absorbed in the direct surfaces in front and cause heat flux generation inside of rock texture. The specific heat transfer inside of shale sample can... 

In this paper, we investigate the problem of designing compact-support interpolation kernels for a given class of signals. By using calculus of variations, we simplify the optimization problem from an nonlinear infinite dimensional problem to a linear finite dimensional case, and then find the optimum compact-support function that best approximates a given filter in the least square sense (ℓ 2 norm). The benefit of compact-support interpolants is the low computational complexity in the interpolation process while the optimum compact-support interpolant guarantees the highest achievable signal-to-noise ratio (SNR). Our simulation results confirm the superior performance of the proposed kernel... 

For the first time, the simultaneous effects of sulfate reducing bacteria (SRB), soil type and moisture content on corrosion behavior of a pipeline steel were investigated. Corrosion weight loss measurements were performed in abiotic control and SRB-active conditions, at three different moisture contents, and in two types of soils. Results showed that the presence of SRB in the soils, although increased the corrosion rate and aggravated pitting corrosion at low moisture contents, had a protective effect at high moisture contents. The corrosion rates showed a maximum at the saturation moisture content (SMC) of the soils. Soil physicochemical analyses showed that the corrosion rate and soil... 

Matsufuji and Imamura (see IEEE Trans. on Info. Theory, vol.46, no.4, p.1691-95, 2000) proposed a new method to generate an optimal set of bent sequences as a set of signature sequences for a CDMA system has been introduced. This method is designed to make the CDMA system secure against interception, for both an insider intruder (a user) and an outsider intruder. The security analysis of this system of Matsufuji et al. was based on computing the cardinality of the search space. In this paper after reforming the bent function decomposition, we reapply the above analysis to the system. Then for binary sequences, we consider another analysis to this system, which is based on the fact that all... 

Caspian Sea - the largest enclosed body of water on earth - is the subject of one of the world's most intractable disputes, involving five coastal states of Azerbaijan, Iran, Kazakhstan, Russia, and Turkmenistan. The conflict over the legal status of this multinational water body emerged after the collapse of the Soviet Union in 1991. Since then the parties have been negotiating without reaching an agreement on the ownerships of waters, and the oil and natural gas beneath them. As long as there is no new agreement on how to share the Caspian Sea among the five states, the two old Iran-USSR treaties may continue to govern the Caspian Sea. Based on these treaties, each state's territorial... 

Development of reliable and accurate models to estimate carbon dioxide–brine interfacial tension (IFT) is necessary, since its experimental measurement is time-consuming and requires expensive experimental apparatus as well as complicated interpretation procedure. In the current study, feed forward artificial neural network is used for estimation of CO2–brine IFT based on data from published literature which consists of a number of carbon dioxide–brine interfacial tension data covering broad ranges of temperature, total salinity, mole fractions of impure components and pressure. Trial-and-error method is utilized to optimize the artificial neural network topology in order to enhance its... 

Under smart grid environment, islanding detection plays an important role in reliable operation of distributed generation (DG) units. In this paper an intelligent-based islanding detection algorithm for PV and DFIG units is proposed. Decision tree algorithm is used to classify islanding detection instances. This algorithm is rapid, simple, intelligible and easy to interpret. The error rate of this method is reduced by Adaptive Boosting (AdaBoost) technique. The proposed method is tested on a distribution system including PV, DFIG and synchronous generator. Probable events in the system are simulated under diverse operating states to generate classification data set. First and second order... 

Accurate prediction of the solubility of gases in hydrocarbons is a crucial factor in designing enhanced oil recovery (EOR) operations by gas injection as well as separation, and chemical reaction processes in a petroleum refinery. In this work, nitrogen (N2) solubility in normal alkanes as the major constituents of crude oil was modeled using five representative machine learning (ML) models namely gradient boosting with categorical features support (CatBoost), random forest, light gradient boosting machine (LightGBM), k-nearest neighbors (k-NN), and extreme gradient boosting (XGBoost). A large solubility databank containing 1982 data points was utilized to establish the models for... 

In this article we introduce the cylindrical construction, as an edge-replacement procedure admitting twists on both ends of the hyperedges, generalizing the concepts of lifts and Pultr templates at the same time. We prove a tensor-hom duality for this construction and we show that not only a large number of well-known graph constructions are cylindrical but also the construction and its dual give rise to some new graph constructions, applications and results. To show the applicability of the main duality we introduce generalized Grötzsch, generalized Petersen-like and Coxeter-like graphs and we prove some coloring properties of these graphs  

For speeding up the complex fractured reservoir simulating, we have given more attention to reducing runtime and improving efficiency of the solver. In this work, we describe an improved and computationally efficient version of Newton's method, which reduces the non-linear iteration count, increases time steps, and furthermore reduces time spent in nonlinear loops of reservoir simulating. Safeguarded variants of Newton's method which have used in current reservoir simulators cannot guarantee convergence of the solution, especially in highly heterogeneous, detailed and fractured reservoirs. In such simulators time step chopping is often observed. From other hand, with growing complexity,...