Sharif Digital Repository

The present study examines the biorecovery of heavy metals from a spent refinery catalyst obtained from one of the oil refineries in Iran using Aspergillus niger. Bioleaching experiments were carried out in batch cultures using A. niger in the one-step process to mobilize Co, Mo and Ni from hazardous spent catalysts. Response surface methodology (RSM) was applied for the design and analysis of experiments with the optimization of pH, temperature, inoculum percentage, pulp density and rotation speed during the bioleaching of the metals. Experiments were designed as per the central composite design (CCD) technique. Three cubic mathematical models were derived for prediction of the responses.... 

In this investigation, a spent processing catalyst from one of the oil refineries in Iran was initially characterized physically and chemically. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used to mobilize aluminum, cobalt, molybdenum and nickel from hazardous spent catalysts. Bioleaching experiments were performed in batch cultures. The growth characteristics of the bacteria (pH, Eh, cell concentration and ferrous and ferric iron concentration) were determined during bioleaching along with the concentration of metal values extracted from the catalyst. The results obtained from Inductive coupled plasma-optical emission spectrometry (ICP-OES) showed that after the... 

Physical and hydraulic properties of new stainless steel spring packing are introduced. The measured hydraulic properties are: dry and wetted packed bed pressure drop, loading and flooding points and the liquid holdups. The appropriate coefficients for predicting the mentioned hydraulic properties from different correlations are also reported. Hydraulic properties for this packing are compared with available packings. In spite of small size, the dry and wetted packed bed pressure drops of spring packing are less than similar Raschig and Protruded rings. The total liquid holdup of this packing is greater than other commercial packings. The big total liquid holdup and physical surface area are... 

Purpose: The purpose of this paper is to present and evaluate the performance of innovation systems by considering two indicators of efficiency and effectiveness. The scope of the evaluation is globally and due to the situation of each country, the suggested strategies are proposed to maintain the status quo or move toward the desired situation for countries. Design/methodology/approach: The approach is to compare and benchmark the countries in terms of the efficiency and effectiveness of their innovation system. The Global Innovation Index report’s input-to-output ratio and the global competitiveness report are used for the assessment. Findings: The findings indicate that countries such as... 

Purpose: The purpose of this paper is to present and evaluate the performance of innovation systems by considering two indicators of efficiency and effectiveness. The scope of the evaluation is globally and due to the situation of each country, the suggested strategies are proposed to maintain the status quo or move toward the desired situation for countries. Design/methodology/approach: The approach is to compare and benchmark the countries in terms of the efficiency and effectiveness of their innovation system. The Global Innovation Index report’s input-to-output ratio and the global competitiveness report are used for the assessment. Findings: The findings indicate that countries such as... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...