Loading...
Search for:
mahdavi--fatemeh
0.113 seconds
Total 464 records
ChemInform abstract: microwave-assisted rapid ketalization/acetalization of aromatic aldehydes and ketones in aqueous media [electronic resource]
, Article Journal of Chemical Research ; September 1999, Volume -, Number 9; Page(s) 562 to 563 ; Mirjalili, Bibi Fatemeh ; Sharif University of Technology
Abstract
Aromatic aldehydes and ketones are readily acetalized or ketalized under microwave irradiation in the presence of water as a solvent
Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain [electronic resource]
, Article Journal of Applied Polymer Science ; Volume 77, Issue 1, pages 30–38, 5 July 2000 ; Mirjalili, Bibi Fatemeh ; Sharif University of Technology
Abstract
A four-step synthetic strategy was applied to achieve novel methacrylic monomers. 5-Norbornene-2,2-dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3-diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, 1H-NMR, and 13C-NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing...
Prediction of DNA/RNA Sequence Binding Site to Protein with the Ability to Implement on GPU
, M.Sc. Thesis Sharif University of Technology ; Koohi, Sommaye (Supervisor)
Abstract
Based on the importance of DNA/RNA binding proteins in different cellular processes, finding binding sites of them play crucial role in many applications, like designing drug/vaccine, designing protein, and cancer control. Many studies target this issue and try to improve the prediction accuracy with three strategies: complex neural-network structures, various types of inputs, and ML methods to extract input features. But due to the growing volume of sequences, these methods face serious processing challenges. So, this paper presents KDeep, based on CNN-LSTM and the primary form of DNA/RNA sequences as input. As the key feature improving the prediction accuracy, we propose a new encoding...
Cross-Lingual Speaker Adaptation for Statistical Parametric Speech Synthesis
, M.Sc. Thesis Sharif University of Technology ; Sameti, Hossein (Supervisor)
Abstract
Speech synthesis and its applications have been very attractive recently. The main purpose of this technique is to produce a speech signal with natural characteristics of human speech like prosody and emotion. Among all existing methods for speech synthesis, statistical parametric speech synthesis methods are more promising because ofhigher flexibility in comparison to other methods. One of the applications of speech synthesis is speech to speech translation. In these systems, the generated voice in target language should have the same characteristics as the input voice in source language. The main purpose of this research is to review and evaluate the cross lingual speaker adaptation...
Hydroelastic Analysis of Surface Piercing Propeller
, M.Sc. Thesis Sharif University of Technology ; Seif, Mohamad Saeed (Supervisor)
Abstract
Surface piercing propellers are particular type of supercavitating propellers that are commonly used for High-speed vessels. Most studies on this type of propellers has been investigating the hydrodynamic forces. But in recent years with increase in SPPs diameter used in vessels, structural analysis of this type of propellers is considered. For this purpose, studies on the stresses exerted on the propeller structures under load is done with the help of Hydro elastic methods. In this type of analysis, structura of propeller is intended to be flexible and Displacements under pressure checked and Tensions resulting from it are studied.
The present Thesis using ANSYS software to analyze a...
The present Thesis using ANSYS software to analyze a...
Data-Driven Pricing Based on Demand Prediction Using Machine Learning Methods
, M.Sc. Thesis Sharif University of Technology ; Sedghi, Nafiseh (Supervisor)
Abstract
Pricing plays an important and essential role in the profit and income of companies. The importance of pricing is not only related to its role in the company's profitability, but it also changes the customer's understanding and loyalty towards the company and can create the company's reputation or destroy it. Determining the right price will increase product sales and increase customer loyalty and create a competitive advantage for the company. One of the most important and influential variables in product pricing is the amount of demand. The main challenge of companies for product pricing is the uncertainty in their demand. In order to deal with this problem, data-driven pricing is used....
Design of Low-Power Zero Temperature Coefficient (ZTC) CMOS Oscillators
, M.Sc. Thesis Sharif University of Technology ; Akbar, Fatemeh (Supervisor)
Abstract
The increasing demand for autonomous vehicles and reliable communication protocols and hardware interfaces, such as CAN bus and USB, underscores the necessity for stable clock sources that maintain a low temperature coefficient (TC) over wide temperature ranges. This demand is particularly emphasized in applications such as wearables, network sensors, downhole devices, WSNs, and IoT, where long-lasting battery life and frequency-stable clock sources over a broad temperature range (e.g. -20 °C to 100 °C) are crucial. Traditionally, variations in frequency caused by temperature have been mitigated by employing off-chip components like crystals or ceramic based oscillators, but this approach...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
The Impact of AV and CAV Vehicles on Capacity and Traffic Flow with Cooperative Lane changing in Mixed Traffic Environment
, M.Sc. Thesis Sharif University of Technology ; Nassiri, Habibollah (Supervisor)
Abstract
Autonomous vehicles, as an integral part of intelligent transportation systems, will play a significant role in the future of transportation services. These vehicles have a high potential to improve road traffic capacity and the efficiency of transportation systems. One type of autonomous vehicle is the connected and autonomous vehicle (CAV), which can communicate with each other, roadside units, traffic control signals, and other infrastructures or devices. This study investigates the impact of autonomous vehicles and connected and autonomous vehicles on the traffic flow of the Tehran-Karaj freeway and vice versa, under various penetration rates and in a mixed traffic environment. In this...
A Comprehensive Review of Studies Conducted in Entrepreneurship Education in Order to Achieve a Codified Framework
, M.Sc. Thesis Sharif University of Technology ; Feyzbakhsh, Alireza (Supervisor)
Abstract
In the current situation and considering the economic conditions, entrepreneurship and self-employment are important factors of business growth. To prepare people in this field, there is a need for effective training that can motivate people. Identifying the effective methods and different dimensions of the entrepreneurship education framework that can lead to setting up a successful program for training people and facilitate the way to achieve the goal of education is one of the important goals of this research. By studying the literature from 2010 onwards, this research systematically examined 96 articles and tried to improve the framework of entrepreneurship education that was stated in...
Evaluation of the Damage to Steel MRF Structures Under Near Field Earthquake Pulses Using a Performance-Based Design Approach
, M.Sc. Thesis Sharif University of Technology ; Rahimzadeh Rofooei, Fayaz (Supervisor)
Abstract
Research on the characteristics of the near field earthquakes has been very popular in recent years due to the considerable damages they have caused to the structures located within the vicinity of seismic sources. The incapability of response spectra for structural damage assessment has been revealed through recent investigations. The recorded data show that the near field earthquakes are often accompanied by a large energy pulse in the beginning of the records caused by the so-called directivity phenomenon. That has encouraged many researchers to study the possibility of using the velocity pulse of these records to evaluate the imposed seismic demands on structures. Thus, investigating the...
Oxidative Addition of Amines to Aldehydes Catalyzed by Supported Cobalt Nanoparticles on SBA-15
, M.Sc. Thesis Sharif University of Technology ; Saidi, Mohamad Reza (Supervisor) ; Rajabi, Fatemeh (Co-Advisor)
Abstract
Considering the widespread applications of amides, synthesis of these compounds is of great importance. The one pot oxidative addition of amines to aldehydes is one of the most simple and appealing approaches to synthesis amides. With the aim of developing a mild and convenient approach towards preparation of amides, numerous methods have been reported for this important process over the past few decades. These improvements have been mostly related to the optimization of reaction conditions and the use of more challenging substrates including diverse derivatives of aldehydes, and also design a novel and effective catalytic systems. Due to the various advantages of supported heterogeneous...
Novel azo-containing polymethacrylates bearing spiroacetal-norbornene moiety and methylene spacers: synthesis and characterization [electronic resource]
, Article European Polymer Journal ; Volume 37, Issue 10, October 2001, Pages 2111–2121 ; Mirjalili, Bibi Fatemeh ; Entezami, Ali A ; Zohuriaan-Mehr, Mohammad J ; Sharif University of Technology
Abstract
An eight-step synthetic strategy was followed to prepare a series of novel azobenzene-containing methacrylate monomers bearing spiroacetal-norbornene moiety and methylene spacers. Thus, the adduct 2, obtained from cyclopentadiene and acrolein, was converted to 1,3-diol 3. The diol was acetalized with nitrobenzaldehyde 4 under microwave irradiation to obtain nitro compound 5 that was then reduced to amino compound 6. Diazonium salt of 6 was coupled with phenol to produce phenolic compound 7 which was then reacted with n-dibromoalkanes (n=2, 4, 6, 8, 10) to yield bromo compounds 9a–e. Nucleophilic substitution reaction of the bromo compounds with lithium methacrylate produced the methacrylic...
A modified ant colony system for finding the expected shortest path in networks with variable arc lengths and probabilistic nodes
, Article Applied Soft Computing Journal ; Vol. 21, issue , August , 2014 , p. 491-500 ; Hassanzadeh, R ; Mahdavi, I ; Mahdavi-Amiri, N ; Sharif University of Technology
2014
Abstract
The problem of finding the expected shortest path in stochastic networks, where the presence of each node is probabilistic and the arc lengths are random variables, have numerous applications, especially in communication networks. The problem being NP-hard we use an ant colony system (ACS) to propose a metaheuristic algorithm for finding the expected shortest path. A new local heuristic is formulated for the proposed algorithm to consider the probabilistic nodes. The arc lengths are randomly generated based on the arc length distribution functions. Examples are worked out to illustrate the applicability of the proposed approach
A genetic algorithm for optimization problems with fuzzy relation constraints using max-product composition
, Article Applied Soft Computing Journal ; Volume 11, Issue 1 , 2011 , Pages 551-560 ; 15684946 (ISSN) ; Khorram, E ; Mahdavi, I ; Mahdavi Amiri, N ; Sharif University of Technology
2011
Abstract
We consider nonlinear optimization problems constrained by a system of fuzzy relation equations. The solution set of the fuzzy relation equations being nonconvex, in general, conventional nonlinear programming methods are not practical. Here, we propose a genetic algorithm with max-product composition to obtain a near optimal solution for convex or nonconvex solution set. Test problems are constructed to evaluate the performance of the proposed algorithm showing alternative solutions obtained by our proposed model
A genetic optimization algorithm and perceptron learning rules for a bi-criteria parallel machine scheduling
, Article Journal of the Chinese Institute of Industrial Engineers ; Volume 29, Issue 3 , 2012 , Pages 206-218 ; 10170669 (ISSN) ; Hassanzadeh, R ; Mahdavi, I ; Mahdavi Amiri, N ; Sharif University of Technology
2012
Abstract
This work considers scheduling problems minding the setup and removal times of jobs rather than processing times. For some production systems, setup times and removal times are so important to be considered independent of processing times. In general, jobs are performed according to the automatic machine processing in production systems, and the processing times are considered to be constant regardless of the process sequence. As the human factor can influence the setup and removal times, when the setup process is repetitive the setup times decreases. This fact is considered as learning effect in scheduling literature. In this study, a bi-criteria m-identical parallel machines scheduling...
A DEA approach for comparing solution efficiency in U-line balancing problem using goal programming
, Article International Journal of Advanced Manufacturing Technology ; Volume 61, Issue 9-12 , August , 2012 , Pages 1161-1172 ; 02683768 (ISSN) ; Hassanzadeh, R ; Mahdavi, I ; Mahdavi Amiri, N ; Sharif University of Technology
Springer
2012
Abstract
Line balancing problem plays an important role in the decision making process to increase efficiency and productivity. Recently, U-shaped layout in many production lines has replaced the traditional straight line layout using just-in-time concept. Here, we propose a model, using multi-objective decision making approach to the U-shaped line balancing problem, to offer enhanced decision maker flexibility, by allowing for conflicting goals. The assembly line operation efficiency is the most significant aim in our study, and this efficiency relates to management of resources and the solution of line balancing problem. First, the U-shaped line balancing problem is solved considering the model's...
A dynamic programming approach for finding shortest chains in a fuzzy network
, Article Applied Soft Computing Journal ; Volume 9, Issue 2 , 2009 , Pages 503-511 ; 15684946 (ISSN) ; Nourifar, R ; Heidarzade, A ; Mahdavi Amiri, N ; Sharif University of Technology
2009
Abstract
Graph theory has numerous applications to problems in systems analysis, operations research, transportation, and economics. In many cases, however, some aspects of a graph-theoretic problem may be uncertain. For example, the vehicle travel time or vehicle capacity on a road network may not be known exactly. In such cases, it is natural to make use of fuzzy set theory to deal with the uncertainty. Here, we are concerned with finding shortest chains in a graph with fuzzy distance for every edge. We propose a dynamic programming approach to solve the fuzzy shortest chain problem using a suitable ranking method. By using MATLAB, two illustrative examples are worked out to demonstrate the...
A two-phase linear programming methodology for fuzzy multi-objective mixed-model assembly line problem
, Article International Journal of Advanced Manufacturing Technology ; Volume 44, Issue 9-10 , 2009 , Pages 1010-1023 ; 02683768 (ISSN) ; Javadi, B ; Sahebjamnia, N ; Mahdavi Amiri, N ; Sharif University of Technology
2009
Abstract
We develop a fuzzy multi-objective linear programming (FMOLP) model for solving multi-objective mixed-model assembly line problem. In practice, vagueness and imprecision of the goals in this problem make the fuzzy decision-making complicated. The proposed model considers minimizing total utility work, total production rate variation, and total setup cost, using a two-phase linear programming approach. In the first phase, the problem is solved using a max-min approach. The max-min solution not being efficient, in general, we propose a new model in the second phase to maximize a composite satisfaction degree at least as good as the degrees obtained by phase one. To show the effectiveness of...
Reserve capacity of mixed urban road networks, network configuration and signal settings
, Article Intelligent Transportation and Planning: Breakthroughs in Research and Practice ; February , 2018 , Pages 883-906 ; 9781522552116 (EISBN) ; Hassanzadeh, R ; Mahdavi, I ; Mahdavi Amiri, N ; Sharif University of Technology
IGI Global
2018
Abstract
The authors formulate the transportation mixed network design problem (MNDP) as a mixed-integer bi-level mathematical problem, based on the concept of reserve capacity. The upper level goal is to maximize the reserve capacity by signal settings at intersections, determine street direction and increase street capacities via addition of lanes. The lower level problem is a deterministic user equilibrium traffic assignment problem to minimize the user travel time. The model being non-convex, meta-heuristic methods are used to solve the problem. A hybridization of genetic algorithm with simulated annealing and a bee algorithm are proposed. Numerical examples are illustrated to verify the...