Sharif Digital Repository

As time has passed, the cost of maintaining expert human resources has been increasing worldwide; as a result, factories and stakeholder has sought ways to exploit the expertise of their human resources as much as possible so they can reduce their costs and, of course, raise their profits. To achieve this, managers decided to assign their human resources to tasks that demands their expertise and knowledge and therefore provides added value for their companies; nevertheless, this decision needs proper alternatives to do routine and predetermined jobs as substitutions for expert human resources.As the technology and the science has been growing day by day, the use of robots has been extremely... 

The purpose of this research is the aerodynamic design of a 100 kW transonic ducted fan. Today, the aviation industry is moving towards the design of electric driven aircraft propulsion. Transonic ducted fans are one of the viable options that have been used in medium and heavy aircrafts due to their high specific power. In this research, the meanline model has been used for the initial design. By applying the design constraints, design limitations, design and functional parameters, the initial design point is found and then a sensitivity analysis is performed with respect to the effective design parameters to obtain the optimal design point. For the initial design of the transonic ducted... 

Inlet air cooling is a simple and economical method to increase the power output of gas turbines. High-pressure fogging systems and mechanical chillers are two common methods. High water consumption, damage to compressor blades by water droplets, and inefficiency in humid climates are disadvantages of high-pressure fogging systems. Mechanical chillers have high electricity consumption and initial costs. In this research, an earth-to-air heat exchanger (EAHE) is introduced as a new method for inlet air cooling of gas turbines and is technically and economically compared with the two common methods in the long term in the climate of Tehran city. Temperature distribution in the ground is... 

Carbon dioxide is one of the main geenhouse gases emitted from factories as well as transportation vehicles that adversely affect the atmosphere and cause global warming. Among the proposed solutions to reduce carbon dioxide in the atmosphere, carbon dioxide separation would be the most viable medium-term approach. However, the high cost of carbon dioxide separation prevents the development of carbon dioxide absorption technologies. Therefore, it seems that integrating separation and production processes is the most efficient way to save energy and reduce carbon emissions. This method decrease a high proportion of the energy consumption in upstream operations (carbon dioxide removal,... 

Aquatic canopy zones play an important role in maintenance of ecosystems. These areas are ubiquitous near rivers, lakes, lagoons, estuaries and shore lines. Governing dynamical systems through these areas have direct influence on, how nutrients and other vital materials for living things disperse. Also, they can control the amount of dissolved oxygen within the body of water in these regions. Nowadays, investigating the effects of vegetation grabbed the attention of many scientists and is a very important burgeoning field. In this study, the effects of surface cooling which resulting from mild wind blow have been investigated. In fact, two type of different currents form when wind blows... 

Local scouring at the downstream of sluice gates in the erosive beds is one of the main concerns of hydraulic engineers because of the significant damage that it can cause to the hydraulic structures. It is important to control the local scour depth at downstream of hydraulic structures to ensure safety operation of these systems. Many researchers have conducted various studies to predict the maximum depth and diameter of scour hole and develop new methods in order to control this phenomenon. One way to overcome this problem is the use of apron, or non-erosive bed. In order to shorten the apron length or decrease the effect of the... 

Air enterance in to flowing water is something that is commonly seen in the water conveyance systems. The mixture of Air and water that flow together create a kind of flow that is called two phase flow. This kind of flow is often seen in culverts and water conveyance systems. There are different flow patterns in two phase flow. Considering pressure fluctuation, pressure drop and pressure recovery, slug flow pattern is the most complicated pattern among all.
Sometimes a singularity is used in a tunnel; one of the singularities that are frequently used in water conveyance system is expansion transition. In this study an experimental setup is used to model two phase slug flow, which passes... 

It is well known that arrays of antennas make it possible to steer the radiation pattern without steering a physical structure. For the past few decades this has been considered for many civil and military communication systems. Recently, ultra-short pulses are considered for high resolution radars and ultra-wideband communication systems. Systems with short pulses and large antenna arrays may benefit from high resolution in both temporal and spatial domains. But the implementation of the ultra-wideband feeding circuits for such antenna arrays is a hard job even with state of the art electronics. Optical technology has been applied, successfully, to a number of radio applications such as... 

Sharp crested weirs are one of the main and oldest means of measuring discharge in water conveyance systems. Many studies have been done on sharp rectangular weirs and have provided many relationships regarding the effect of geometric parameters and various factors on discharge coefficient of the weirs.In some places, due to existence of obstacles or barriers in the channel, it is impossible to create a symmetrical continuous weir some other cases,multiple or asymmetric weirs should be used, which is the main concept of this project.Since it seems unlikely that a purely mathematical model can review the impact of the multiplicity and asymmetry of these weirs without using empirical... 

High-power (108 – 109 W) RF pulses with a carrier frequency of C band and a duration of several oscillation periods can be produced through direct energy conversion of a travelling high-voltage pulse with the use of nonlinear elements.
Nonlinear transmission lines consist either of lumped nonlinear elements and provide spatial dispersion of excited oscillations or of elements uniformly distributed on a certain line segment. The first type of NLTL’s can be referred to NLTL’s with spatial dispersion. The second type of NLTL’s is ensemble of nonlinear oscillators with a characteristic natural frequency and temporal dispersion. In the first case, the duration of electromagnetic pulses is... 

During 1980s Additive Manufacturing technologies for the purpose of prototyping with fast and less expensive, under the name of Rapid Prototyping was invented. But nowadays under the vast progress made in this field, it possesses a notable place in different industries such as automobile manufacturing, aerospace, architecture, medicine and so on for part manufacturing. In all AM machines, the CAD model design part is manufactured by adding layered to each other. In this research, at first by explaining manufacturing process and current different technologies, the place of this manufacturing process in today and future industry, is analyzed. For discussing replacement of this method instead... 

One of the most important methods of controlling discharge in water industry which is widely used in irrigation, water distribution, waste-water engineering, drainage, flood control and other water related projects, is side weir. The hydraulic behavior of flow over side weir is spatially varied flow with decreasing discharge. Various investigators have related the weir discharge coefficient as a function of main channel upstream Froude number and the fraction of weir height to upstream depth . Performance of sharp crested side weirs with extended length (as labyrinth side weir with asymmetric geometry) has been studied in this thesis. The variables for this study are height of weir ,... 

If the size of the conventional telecommunication antennas -that are widely used in transmitting broadcasted radio and TV messages- is reduced by a nanometer size these antennas can be used at optical frequencies. Dimensions of these optical nanoantennas -that made of nanoparticles with highly permittivity- can be smaller than half of the wavelength. Based on this capability, optical nanoantennas have some important applications such as optical communication, photovoltaic devices, non-classical light, and optical sensing. After studying on optical nanoantennas and their features, in this project, we present distinctions between optical NAs and MW antennas and then investigate about different... 

The Deep Fading Effect is a destructive factor in communication systems, one of the solutions to eliminate it is the use of Diversity, and there are two types of indicators of Diversity, Spatial Diversity and Polarization Diversity. Spatial Diversity is a common method to reduce the Fading Effect while increasing the cost and increasing the volume of the communication station, which to optimize the cost and reduce the volume of the communication station, the Polarization Diversity Structure is added to the telecommunication system. To apply Spatial Diversity, several Antennas with different Polarizations are used, which The most common method in mobile telecommunication station systems is... 

Cloud computing has brought about many changes in the new business arena. These changes do not only include technological changes, but have penetrated the business models of many companies. For example, in recent years, many companies have migrated from their former systems to cloud computing for reasons such as easy and low-cost access to high-performance hardware and software systems, and to avoid maintenance and repair costs and security costs.Due to the economic conditions in recent years and the high cost of electronic items, the criterion of purchase price has become much more important than in the past among people when buying such goods. Now in the Iranian electronics market,... 

Wireless communication systems play a pivotal role in the daily lives of individuals. Given the escalating demand for higher data rates and enhanced reliability, there is an imperative need for cutting-edge communication technologies. Rigorous research is being conducted in these systems to refine and optimize antenna structures, aiming at augmenting performance, escalating data transmission rates, and mitigating interference. Microstrip antenna structures have garnered considerable attention due to their diminutive dimensions, adaptability to planar and non-planar surfaces, simplistic design, cost-effectiveness, and mechanical resilience. These antennas, featuring diverse patch shapes,... 

Increasing demand in power systems necessitates the Generation Expansion Planning (GEP) which is to determine the type, size, and location of new generating units in a planning horizon. The final solution of GEP is based on the minimum cost and/or optimum reliability taking into account various constraints such as capacity of units and lines, operating constraints, and budget restrictions. This paper presents a model based on scenarios for generation expansion planning and units retirement decision. The proposed model could be used by vertically integrated utilities as well as the ISOs in electricity markets to obtain generation expansion schemes. In this approach, uncertainty of units are...