Loading...
Search for: mahmoodi--a---anvar
0.112 seconds

    Price competition in duopoly supply chains with stochastic demand [electronic resource]

    , Article Journal Of Manufacturing Systems ; 01/2014 Mahmoodi, A. (Anvar) ; Eshghi, Kourosh ; Sharif University of Technology
    Abstract
    In the literature, substantial researches have been carried out on supply chain coordination. The majority of these studies suggest a mechanism that enforces the supply chain members to follow the strategies that produce the equilibrium of an integrated supply chain. Moreover, most of researches do not consider the competition among supply chains  

    Roll bonding of AA5052 and polypropylene sheets: bonding mechanisms, microstructure and mechanical properties

    , Article Journal of Adhesion ; 2016 , Pages 1-25 ; 00218464 (ISSN) Rezaei Anvar, B ; Akbarzadeh, A ; Sharif University of Technology
    Taylor and Francis Inc  2016
    Abstract
    Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was... 

    Roll bonding of AA5052 and polypropylene sheets: bonding mechanisms, microstructure and mechanical properties

    , Article Journal of Adhesion ; Volume 93, Issue 7 , 2017 , Pages 550-574 ; 00218464 (ISSN) Rezaei Anvar, B ; Akbarzadeh, A ; Sharif University of Technology
    Taylor and Francis Inc  2017
    Abstract
    Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was... 

    Physical Modeling of Metal Matrix Composite Sheets With Second Phase Manufactured by Accumulative Roll Bonding (ARB) of Al-Ni Laminations

    , M.Sc. Thesis Sharif University of Technology Rezaei Anvar, Behrouz (Author) ; Akbarzadeh, Abbas (Supervisor)
    Abstract
    Metallic multilayer composites provide remarkable mechanical, electrical and magnetic properties. These kinds of composites have been recently processed by severe plastic deformation (SPD) methods. Accumulative roll bonding (ARB) is one of the SPD processes in which accumulation of strain by repeating cycles, leads to the ultra fine grained materials. The goal of this research is manufacturing of Al/Ni composite sheets by ARB process considering the effects of thickness and number of initial sheets on their mechanical properties and microstructures. The initial composites were produced by commercially pure Al and Ni as the matrix and the reinforcement, respectively. Thickness of the Al... 

    On edge star sets in trees

    , Article Discrete Mathematics ; Volume 311, Issue 13 , July , 2011 , Pages 1172-1178 ; 0012365X (ISSN) Akbari, S ; Ghorbani, E ; Mahmoodi, A ; Sharif University of Technology
    2011
    Abstract
    Let A be a Hermitian matrix whose graph is G (i.e. there is an edge between the vertices i and j in G if and only if the (i,j) entry of A is non-zero). Let λ be an eigenvalue of A with multiplicity mA(λ). An edge e=ij is said to be Parter (resp., neutral, downer) for λ,A if mA(λ)-mA-e(λ) is negative (resp., 0, positive ), where A-e is the matrix resulting from making the (i,j) and (j,i) entries of A zero. For a tree T with adjacency matrix A a subset S of the edge set of G is called an edge star set for an eigenvalue λ of A, if |S|=mA(λ) and A-S has no eigenvalue λ. In this paper the existence of downer edges and edge star sets for non-zero eigenvalues of the adjacency matrix of a tree is... 

    Nowhere-zero eigenvectors of graphs

    , Article Linear and Multilinear Algebra ; Volume 61, Issue 2 , 2013 , Pages 273-279 ; 03081087 (ISSN) Akbari, S ; Ghorbani, E ; Mahmoodi, A ; Sharif University of Technology
    2013
    Abstract
    A vector is called nowhere-zero if it has no zero entry. In this article we search for graphs with nowhere-zero eigenvectors. We prove that distance-regular graphs and vertex-transitive graphs have nowhere-zero eigenvectors for all of their eigenvalues and edge-transitive graphs have nowhere-zero eigenvectors for all non-zero eigenvalues. Among other results, it is shown that a graph with three distinct eigenvalues has a nowhere-zero eigenvector for its smallest eigenvalue  

    One for one period policy for perishable inventory

    , Article Computers and Industrial Engineering ; Volume 79 , January , 2015 , Pages 10-17 ; 03608352 (ISSN) Mahmoodi, A ; Haji, A ; Haji, R ; Sharif University of Technology
    Elsevier Ltd  2015
    Abstract
    Recently, for zero ordering cost a new ordering policy named (1, T), in which the time interval between two consecutive orders and the value of the order size are both constant, have been developed for nonperishable products. In this paper, the (1, T) policy is developed for perishable products. Using an analogy among this inventory model, a queueing model with impatient customers, and a finite dam model, the long-run average total cost function of the inventory system is derived. It is observed that the total cost rate is independent from the lead time as is for nonperishable products. Since analyzing the convexity of the model is extremely complicated, a proposition is proved to define a... 

    On graphs whose star sets are (co-)cliques

    , Article Linear Algebra and Its Applications ; Volume 430, Issue 1 , 2009 , Pages 504-510 ; 00243795 (ISSN) Akbari, S ; Ghorbani, E ; Mahmoodi, A ; Sharif University of Technology
    2009
    Abstract
    In this paper we study graphs all of whose star sets induce cliques or co-cliques. We show that the star sets of every tree for each eigenvalue are independent sets. Among other results it is shown that each star set of a connected graph G with three distinct eigenvalues induces a clique if and only if G = K1, 2 or K2, ..., 2. It is also proved that stars are the only graphs with three distinct eigenvalues having a star partition with independent star sets. © 2008 Elsevier Inc. All rights reserved  

    A two-echelon inventory model with perishable items and lost sales

    , Article Scientia Iranica ; Volume 23, Issue 5 , 2016 , Pages 2277-2286 ; 10263098 (ISSN) Mahmoodi, A ; Haji, A ; Haji, R ; Sharif University of Technology
    Sharif University of Technology  2016
    Abstract
    This article deals with a single perishable item, continuous-review, two-echelon serial inventory system consisting of a warehouse and a retailer. Customer demands at the retailer are assumed to be Poisson. All items have a fixed shelf life and start aging on their arrival at the retailer. The demand that cannot be met immediately at the retailer is lost. All transportation times are fixed. If there is any stock in the warehouse, the lead time for the retailer would be the transportation time from the warehouse. Otherwise, the retailer orders are met with a delay. In this article, using an approximate technique, we first present a heuristic for finding cost-effective base stock policy and... 

    A new correlation on the MEXICO experiment using a 3D enhanced blade element momentum technique

    , Article International Journal of Sustainable Energy ; Vol. 33, issue. 2 , 2014 , pp. 448-460 ; ISSN: 14786451 Mahmoodi, E ; Jafari, A ; Schaffarczyk, A. P ; Keyhani, A ; Mahmoudi, J ; Sharif University of Technology
    2014
    Abstract
    The blade element momentum (BEM) theory is based on the actuator disc (AD) model, which is probably the oldest analytical tool for analysing rotor performance. The BEM codes have very short processing times and high reliability. The problems of the analytical codes are well known to the researchers: the impossibility of describing inside the one-dimensional code the three-dimensional (3D) radial flows along the span-wise direction. In this work, the authors show how the 3D centrifugal pumping affects the BEM calculations of a wind turbine rotor. Actually to ascertain the accuracy of the analytical codes, the results are compared with rotor performance, blade loads and particle image... 

    Preparation, magnetic properties, and photocatalytic performance under natural daylight irradiation of Fe3O4-ZnO core/shell nanoparticles designed on reduced go platelet

    , Article Materials Science in Semiconductor Processing ; Volume 72 , 2017 , Pages 85-92 ; 13698001 (ISSN) Ghanbarnezhad, S ; Baghshahi, S ; Nemati, A ; Mahmoodi, M ; Sharif University of Technology
    2017
    Abstract
    Ternary mesoporous nanocomposites of RGO/Fe3O4-ZnO were prepared successfully via hydrothermal technique. Fe3O4-ZnO core/shell nanoparticles were decorated on the surface of reduced graphene oxide platelet to improve charge separation efficiency and magnetic properties. The phase, microstructure and specific surface area of the prepared samples were determined via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy/selected area electron diffraction (TEM/SAED) and Brunauer–Emmett–Teller (BET) techniques. A vibrating sample magnetometer (VSM) was used for recording the magnetization hysteresis curves. The methylene blue (MB)... 

    New pyridinium-based ionic liquid as an excellent solvent-catalyst system for the one-pot three-component synthesis of 2,3-disubstituted quinolines

    , Article ACS Combinatorial Science ; Vol. 16, Issue. 3 , 2014 , Pages 93-100 ; ISSN: 21568952 Anvar, S ; Mohammadpoor-Baltork, I ; Tangestaninejad, S ; Moghadam, M ; Mirkhani, V ; Khosropour, A. R ; Landarani Isfahani, A ; Kia, R ; Sharif University of Technology
    2014
    Abstract
    The synthesis of a variety of 2,3-disubstituted quinolines has been achieved successfully via a one-pot three-component reaction of arylamines, arylaldehydes and aliphatic aldehydes in the presence of butylpyridinium tetrachloroindate(III), [bpy][InCl4], ionic liquid as a green catalyst and solvent. Mild conditions with excellent conversions, and simple product isolation procedure are noteworthy advantages of this method. The recyclability of the ionic liquid makes this protocol environmentally benign  

    CHP optimized selection methodology for an energy hub system

    , Article 2011 10th International Conference on Environment and Electrical Engineering, EEEIC.EU 2011 - Conference Proceedings, 8 May 2011 through 11 May 2011 ; May , 2011 , Page(s): 1 - 5 ; 9781424487820 (ISBN) Sheikhi, A ; Ranjbar, A. M ; Safe, F ; Mahmoodi, M ; Sharif University of Technology
    2011
    Abstract
    Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

    Role of information technology in business revolution

    , Article International Journal of Advanced Manufacturing Technology ; Volume 53, Issue 1-4 , 2011 , Pages 411-420 ; 02683768 (ISSN) Arasteh, A ; Aliahmadi, A ; Mahmoodi, H.S ; Mohammadpour, M. O ; Sharif University of Technology
    2011
    Abstract
    This paper investigates the relation between information technology (IT) and the change of business operations. We evaluate the geographical demand of companies for customer service interactions. The structure is a separate selection model in which districts play the role of distinguished products. The approximated demand structure is used to evaluate the results of IT on customer size, place selection, and cost preserving. The results verify the higher cost vulnerability of IT-thorough companies but propose that capability to utilize cost different is highly company-specified and that the influence of geographically restricted externalities is even existent. Because the productivity of many... 

    Stereoselective synthesis of β-amino ketones via direct Mannich-type reactions, catalyzed with ZrOCl2·8H2O under solvent-free conditions

    , Article European Journal of Organic Chemistry ; Issue 22 , 2006 , Pages 5152-5157 ; 1434193X (ISSN) Eftekhari-Sis, B ; Abdollahifar, A ; Mahmoodi Hashemi, M ; Zirak, M ; Sharif University of Technology
    2006
    Abstract
    At room temperature, zirconium oxychloride (ZrOCl2· 8H2O) efficiently catalyzes the direct Mannich-type reaction of a variety of in situ generated aldimines using aldehydes and anilines with ketones in a three-component reaction under solvent-free conditions. The reaction proceeds rapidly and affords the corresponding β-amino ketones in good to high yields with good to excellent stereoselectivities. The catalyst can be recycled for subsequent reactions without any appreciable loss of efficiency. © Wiley-VCH Verlag GmbH & Co. KGaA, 2006  

    Synthesis of Ni-Co-CNT nanocomposite and evaluation of its photocatalytic dye (Reactive red 120) degradation ability using response surface methodology

    , Article Desalination and Water Treatment ; Volume 216 , 2021 , Pages 389-400 ; 19443994 (ISSN) Shokrgozar, A ; Seifpanahi Shabani, K ; Mahmoodi, B ; Mahmoodi, N. M ; Khorasheh, F ; Baghalha, M ; Sharif University of Technology
    Desalination Publications  2021
    Abstract
    Herein, NiO and Co2 O3, NiCo2 O4, and NiCo2 O4 /multi-walled carbon nanotubes nanocomposite were synthesized by the hydrothermal method and characterized by scanning electron micros-copy, energy dispersive spectroscopy, and X-ray diffraction. The photocatalytic activity of the synthesized materials was evaluated by Reactive Red 120 dye degradation. The photocatalytic activity of NiO and Co3 O4 was enhanced not only by the formation of NiCo2 O4, but also by its interaction with the functionalized multiwall carbon nanotubes support. The response surface methodology (RSM) was used to obtain the optimum parameters, including catalyst dosage, initial dye concen-tration, and pH on the dye... 

    Enhance the Chlorine Resistance of Reverse Osmosis Membrane

    , M.Sc. Thesis Sharif University of Technology Kehtari Anvar, Mahmood (Author) ; Mousavi, Abbas (Supervisor) ; Abdekhodaei, Mohammad Jafar (Supervisor)
    Abstract
    Reverse osmosis membrane one of the common methods used for water desalination, today membrane, thin film composite(TFC) include three layers, top the these layers named selection layer, this poly amid layer contacted with feed water, sensitivity to chlorine in polyamide layer lead to high membrane chlorine sensitive. Difference methods used for enhance the chlorine resistance in polyamide membrane that categorized in three general categories, covering and protection of sensitive areas method has best results in comparison to other methods. In this research protection method choose and used, material that used, sanitized by result from surface analysis of commercial membrane manufactured in... 

    Evaluation of Bonding and Mechanical Properties of Metal-Polymer Sheets Manufactured by Roll Bonding

    , Ph.D. Dissertation Sharif University of Technology Rezaei Anvar, Behrouz (Author) ; Akbarzadeh, Abbas (Supervisor) ; Kokabi, Amir Hossein (Co-Advisor)
    Abstract
    Emission of the greenhouse gases is a great concern and use of lightweight materials in transport vehicles has found a major importance in this respect. Metal/polymer laminated composites are of great interest due to their special mechanical properties and thoughness. Application of metal/polymer sheets is limited because of low bonding strength of metals and polymers in these sheets, which is not sufficient, to endure the stresses and strains during deformation processes such as deep drawing and bending. In this research, roll bonding of AA5052/Polypropylene sheets is investigated and the effects of bonding parameters on strength are evaluated and finally the bonding mechanisms during... 

    , M.Sc. Thesis Sharif University of Technology Mahmoodi, Anwar (Author) ; Eshghi, Kourosh (Supervisor)
    Abstract
    In literature, substantial works have been done on supply chain coordination. The majority of these works looking for a mechanism that enforces the supply chain members to follow strategies that produce the equilibria of an integrated supply chain, and most of this literature ignores competition between supply chains. In this thesis, we consider two distinct supply chains which compete to each other on the price. We present a method to calculate the equilibria for three structural forms. In the first form, two supply chains are integrated and in the second form, one of the supply chains is integrated and the other one is decentralized. Finally in the third form, both supply chains are... 

    Evaluation and Simulation of Tunnel Mid-shaft Effects on the Natural and Normal Ventilation Performance in a Subway Tunnel

    , M.Sc. Thesis Sharif University of Technology Mahmoodi, Ghasem (Author) ; Farhanieh, Bijan (Supervisor)
    Abstract
    Necessity of a public transport network, environmental protection and a highly land cost in urban areas have increased the desire for underground transportation systems. On the other hand, ventilation system design should be done precisely specially for longer tunnels, large undergrounds spaces and crowded places. Rate of energy reduction for vent systems operation is dependent on their proper implementation. Tunnel design efficiently is influenced by ventilation system. The tunnel mid shaft is complementary part of the underground railway systems that is required for exchange air between the tunnel and the railway station with ambient fresh air. An important application of the tunnel mid...