Sharif Digital Repository

In this work, novel chitosan/bacterial cellulose (CS/BC) nanofibrous composites reinforced with graphene oxide (GO) nanosheets are introduced. As cell attachment and permeability of nanofibrous membranes highly depend on their fiber diameter, the working window for successful electrospinning to attain sound nanofibrous composites with a minimum fiber diameter was determined by using the response surface methodology. It is shown that the addition of GO nanosheets to CS/BC significantly reduces the average size of the polymeric fibers. Their mechanical properties are also influenced and can be tailored by the concentration of GO. Fourier transform infrared spectroscopy reveals hydrogen bonding... 

For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and... 

To improve the hydrogen kinetics of magnesium hydride, TiCr1.2Fe0.6 alloy was prepared by vacuum arc remelting (VAR) and the alloy was co-milled with MgH2 to process nanostructured MgH2–5 at.% TiCr1.2Fe0.6 powder. The hydrogen desorption properties of the composite powder were studied and compared with pure magnesium hydride. X-ray diffraction (XRD) analysis showed that the composite powder prepared by VAR/mechanical alloying (MA) procedure consisted of β-MgH2, γ-MgH2, bcc Ti–Cr–Fe alloy, and small amount of MgO. The average size of particles and their grain structure after 4 h MA were determined by a laser particle size analyzer and XRD method and found to be 194 nm and 11 nm, respectively.... 

Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including... 

In the present work, biocompatible superparamagnetic iron oxide nanoparticles coated by mesoporous silica were used as drug nanocarriers for doxorubicin (Dox; an anticancer drug) delivery. In biological media, the interaction of protein corona layer with the surface of nanoparticles is inevitable. For this reason, we studied the effect of protein corona on drug release from magnetic mesoporous silica nanoparticles (MMSNs) in human plasma medium. Besides, we used hydrophilic and biocompatible polymer, polyethylene glycol (PEG), to decrease protein corona effects. The results showed the increased Dox release from PEGylated MMSNs compared with bare MMSNs. This result indicated that the coating... 

In the present work, high-energy mechanical alloying (MA) was employed to synthesize a nanostructured magnesium-based composite for hydrogen storage. The preparation of the composite material with composition of MgH2–5at% (TiCr1.2Fe0.6) was performed by co-milling of commercial available MgH2 powder with the body-centered cubic (bcc) alloy either in the form of Ti–Cr–Fe powder mixture with the proper mass fraction (sample A) or prealloyed TiCr1.2Fe0.6 powder (sample B). The prealloyed powder with an average crystallite size of 14nm and particle size of 384nm was prepared by the mechanical alloying process. It is shown that the addition of the Ti-based bcc alloy to magnesium hydride yields a... 

Let q be a quadratic form over a field K of characteristic different from 2. We investigate the properties of the smallest positive integer n such that -1 is a sum of n values represented by q in several situations. We relate this invariant (which is called the q-level of K) to other invariants of K such as the level, the u-invariant and the Pythagoras number of K. The problem of determining the numbers which can be realized as a q-level for particular q or K is studied. We also observe that the q-level naturally emerges when one tries to obtain a lower bound for the index of the subgroup of non-zero values represented by a Pfister form q. We highlight necessary and/or sufficient conditions... 

The subject of this study is to investigate the effect of repair on the fatigue life of tubular joints. Six cracked specimens previously subjected to fatigue loading underwent weld repair. Two of these specimens were shot peened before primary fatigue loading. It is shown that repair for the original specimens increases the fatigue life by roughly 150%. The increase of fatigue life for shot peened and repaired specimens is around 105%. The in-depth residual stresses are measured on the repaired joints before and after fatigue loading. It can be stated that repair made a remarkable improvement on the fatigue behavior of tubular joints examined in this investigation. However, where repair is... 

Herein, poly (acrylic acid) (PAA) microgels were synthesized via alcohol type cross-linked by a free radical precipitation polymerization approach. At the first time, 1,6-hexanediol (1–6 diol), trimethylolpropane (TMP), and pentaerythritol (PEN) were selected as multifunctional cross- linking agent to synthesize cross-linked poly(acrylic acid) microgels. Alcohol type cross-linking agents can connect the PAA chains. The cross-linking reaction takes place due to reaction between hydroxyl groups of various cross-linkers and carboxyl groups of PAA chains. All of the hydroxyl groups do not participate in the reaction with acid groups of polymer chains through the polymerization stage; therefore,... 

Herein, poly (acrylic acid) (PAA) microgels were synthesized via alcohol type cross-linked by a free radical precipitation polymerization approach. At the first time, 1,6-hexanediol (1–6 diol), trimethylolpropane (TMP), and pentaerythritol (PEN) were selected as multifunctional cross- linking agent to synthesize cross-linked poly(acrylic acid) microgels. Alcohol type cross-linking agents can connect the PAA chains. The cross-linking reaction takes place due to reaction between hydroxyl groups of various cross-linkers and carboxyl groups of PAA chains. All of the hydroxyl groups do not participate in the reaction with acid groups of polymer chains through the polymerization stage; therefore,... 

Polymer-based composites are used for wound healing applications. This work aims to prepare an inorganic-polymer nanocomposite based on bentonite, poly(vinyl alcohol), and bacterial cellulose by electrospinning for wound healing. The nanocomposite is synthesized using a solution intercalation technique, with 1–2 wt% nanobentonite concentration variation. The effects of commercial and laboratory-synthesized nanobentonite as well as the extract of the green walnut shell (EGWS) are examined and characterized by different techniques. The addition of nanobentonite increases the average size of fibers and tensile strength up to 200 nm and more than 15 MPa, respectively, due to the presence of... 

The current study describes design and synthesis of silica-coated zinc oxide nanoparticles containing Ponceau 4R food colorant (named as ZnO@SiO2@APTMS/P4R). The interactions of Ponceau 4R and ZnO@SiO2@APTMS/P4R with calf thymus-DNA were investigated It should be noted that the competitive binding experiment revealed that both Ponceau 4R and ZnO@SiO2@APTMS/P4R could release Hoechst 33258. As inferred from the results the binding of the Ponceau 4R and ZnO@SiO2@APTMS/P4R with DNA were surface binding, mainly due to groove binding. Furthermore, antibacterial properties of ZnO, Ponceau 4R and ZnO@SiO2@APTMS/P4R samples against gram-positive bacteria and gram-negative bacteria were examined and... 

Abstract: In recent years, temporary skin grafts (TSG) based on natural biopolymers modified with carbon nanostructures have received considerable attention for wound healing. Developments are required to improve physico-mechanical properties of these materials to match to natural skins. Additionally, in-deep pre-clinical examinations are necessary to ensure biological performance and toxicity effect in vivo. In the present work, we show superior acute-wound healing effect of graphene oxide nanosheets embedded in ultrafine biopolymer fibers (60 nm) on adult male rats. Nano-fibrous chitosan-based skin grafts crosslinked by Genepin with physico-mechanical properties close to natural skins were... 

This is a variation on a theme of Bayer-Fluckiger, Shapiro, and Tignol related to hyperbolic involutions. More precisely, criteria for the hyperbolicity of involutions of quadratic extensions of simple algebras and involutions of the form σ ⊗ τ and σ ⊗ ρ, where σ is an involution of a central simple algebra A, τ is the nontrivial automorphism of a quadratic extension of the center of A, and ρ is an involution of a quaternion algebra are obtained  

The aim of this article is to provide a characterization of quadratic forms of low dimension such that the canonical involutions of their Clifford algebras are hyperbolic  

Involutions of the Clifford algebra of a quadratic space induced by orthogonal symmetries are investigated  

For every rotation (Formula presented.) of the Euclidean space (Formula presented.) ((Formula presented.)), we find an upper bound for the number (Formula presented.) such that (Formula presented.) is a product of (Formula presented.) rotations by an angle (Formula presented.) ((Formula presented.)). We also find an upper bound for the number (Formula presented.) such that (Formula presented.) can be written as a product of (Formula presented.) full rotations by an angle (Formula presented.). © 2017 Australian Mathematical Publishing Association Inc  

For every rotation of the Euclidean space ℝ(n≥3), we find an upper bound for the number such that is a product of rotations by an angle α( 0<≤π). We also find an upper bound for the number such that ρ can be written as a product of full rotations by an angle α. © 2017 Australian Mathematical Publishing Association Inc  

This article aims to present a geometric interpretation of the simplicity of the rotation group of three-dimensional Euclidean space. Some historical remarks on the subject and an overview of a collection of different proofs of this result are also given