Sharif Digital Repository

Models for chatter prediction in machining often use a mechanistic force model that calculate the force as the product of a material dependent cutting constant and chip area. However, in reality, the forces are the result of complex interaction between the tool and the chip, and are affected by many factors. The effects of these complex, and often nonlinear, factors on the machining dynamics may only be included in chatter prediction if the chip formation process is simulated concurrently with simulation of the machining dynamics. In this paper, finite element simulation of the chip formation process is combined with simulation of chatter dynamics and the inter-relationship between the chip... 

Machining chatter is an inherently nonlinear phenomenon that is affected by many parameters such as cutting conditions, tool geometry e.g., nose radius and clearance angle and frictional conditions at the tool/workpiece interface. Models for chatter prediction often ignore nonlinearities or introduce them through simple models for friction and geometry. In particular, the effect of chiptool interaction on the occurrence of chatter is not investigated thoroughly. This paper presents a novel approach for prediction of chatter vibration and for investigation of the effects of various conditions on the onset of chatter. This approach uses finite element simulation to investigate the... 

A molecular dynamics (MD) simulation is employed to study the phase transition process in argon induced by shock wave transmission. Deriving the relation between the shock and piston velocities, the theoretical equation of state for argon is presented. Also, argon equation of state is obtained by measuring the quantities directly from simulations to be able to detect the phase transitions. The phase transition is also detected by using argon phase diagram and free energy calculations. A comparison shows good agreement between the theoretical and MD results for the phase transitions. Based on these simulations, it is concluded that under a shock wave transmission with suitable energy, the... 

Abstract High ductility of metals as well as high strength of ceramics has made the metal/ceramic composites an attractive material for many applications requiring high strength to weight ratios. An important issue in using this material is the behavior of the material and its ceramic-metal interface under various loading, especially at high strain rate. To provide a better understanding of the interface conditions, in this work, a molecular dynamics study of the interface behavior in Al/α-Al2O3 composite as the result of tensile and shear loadings is presented. For this purpose, the reactive force field (ReaxFF) potential function is utilized. The effects of... 

The interfacial behavior of composites is often simulated using a cohesive zone model (CZM). In this approach, a traction-separation (T-S) relation between the matrix and reinforcement particles, which is often obtained from experimental results, is employed. However, since the determination of this relation from experimental results is difficult, the molecular dynamics (MD) simulation may be used as a virtual environment to obtain this relation. In this study, MD simulations under the normal and shear loadings are used to obtain the interface behavior of Al/Al2O3 composite material and to derive the T-S relation. For better agreement with Al/Al2O3 interfacial behavior, the exponential form... 

Porous scaffolds composed of gelatin/poly (vinyl alcohol), (Gel/PVA), were prepared using combination of freeze gelation and freeze drying methods. The effect of polymer concentration, gelatin/PVA ratio, and glutaraldehyde/gelatin ratio (GA/Gel) was investigated on morphology of pores, swelling ratio, biodegradation, and skin cell culture. At optimum preparation conditions the scaffolds had uniform pore size distributions showing high swelling ratio of 23.6. The scaffolds were of biodegradable nature and almost degraded in 28 days. Human dermal fibroblast cells (HDF) were cultured on the scaffolds and MTS assay was conducted to evaluate the influence of PVA on growth and proliferation of the... 

Porous scaffolds composed of gelatin/poly (vinyl alcohol), (Gel/PVA), were prepared using combination of freeze gelation and freeze drying methods. The effect of polymer concentration, gelatin/PVA ratio, and glutaraldehyde/gelatin ratio (GA/Gel) was investigated on morphology of pores, swelling ratio, biodegradation, and skin cell culture. At optimum preparation conditions the scaffolds had uniform pore size distributions showing high swelling ratio of 23.6. The scaffolds were of biodegradable nature and almost degraded in 28 days. Human dermal fibroblast cells (HDF) were cultured on the scaffolds and MTS assay was conducted to evaluate the influence of PVA on growth and proliferation of the... 

A molecular dynamics simulation of the shock-wave propagation in the face-centered cubic (FCC) structured C60 fullerene along the <100>, <110> and <111> crystallographic directions is performed. For this purpose, the response of the material under different shock-wave loadings is studied through Hugoniot curves. Three regimes of the material behavior have been observed from fully elastic to elastic-plastic to plastic. The Hugoniot elastic limit and the phase transition are also investigated along different crystallographic directions. It is shown that the shock wave travels faster along the <110> and <111> directions than in the <100> direction in the material. Comparing the results with the... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only...