Loading...
Search for: mardi--saeed
0.134 seconds

    Fabrication and the electrochemical activation of network-like MnO2 nanoflakes as a flexible and large-area supercapacitor electrode

    , Article Journal of Solid State Electrochemistry ; Volume 22, Issue 11 , 2018 , Pages 3507-3514 ; 14328488 (ISSN) Mardi, S ; Moradlou, O ; Moshfegh, A. Z ; Sharif University of Technology
    2018
    Abstract
    Porous network-like MnO2 thick films are successfully synthesized on a flexible stainless steel (SS) mesh using a simple and low-cost electrodeposition method followed by an electrochemical activation process. Morphology, chemical composition, and crystal structure of the prepared electrodes before and after the activation process are determined and compared by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses. The results show that the implementation of the electrochemical activation process does not change the chemical composition and crystal structure of the films, but it influences the surface morphology of the MnO2... 

    Synthesis and Characterization of Supercapacitor Electrodes Based on Graphene and MnO2 Nanostructure

    , M.Sc. Thesis Sharif University of Technology Mardi, Saeed (Author) ; Moshfegh, Alireza (Supervisor) ; Moradlou, Omran (Co-Advisor)
    Abstract
    Supercapacitors represent a new class of energy storage devices that have been attracted many researchers in last few years. Graphene with unique properties such as superior electrical conductivity and large specific surface area is one of the most suitable materials in supercapacitor applications. Besides, metal oxides are being used as active compounds in supercapacitors due to their role in redox reactions. In this research, synthesis and characterization of supercapacitor electrodes based on graphene and MnO2 nanostructured materials was studied under different conditions. For this purpose, Graphene oxide (GO) was synthesized by Hummers’ method and then, it was deposited on a nickel foam... 

    Customers Evaluation and Clustering by Using Applications of Data Science in Marketing

    , M.Sc. Thesis Sharif University of Technology Mardi Mamaqani, Hamid Reza (Author) ; Shadrokh Sikari, Shahram (Supervisor)
    Abstract
    Nowadays we see competition between organizations to maintain excellence and survival in business. Organizations should focus on maintaining and satisfying their customers in their services and products, because it is the customers who, as buyers of services and products, provide the company's revenue stream. With the advancement of computer technology today, a large amount of customer data can be stored and maintained. This data is a valuable resource for analyzing customer behavior and making the right decisions for the organization. Organizations need to use customer behavioral data to make their marketing activities smart and data-driven. In fact, organizations need to move towards... 

    Design and experimental evaluation of a precise and compact tubular ultrasonic motor driven by a single-phase source

    , Article Precision Engineering ; Volume 48 , 2017 , Pages 172-180 ; 01416359 (ISSN) Dabbagh, V ; Sarhan, A. A. D ; Akbari, J ; Azizi Mardi, N ; Sharif University of Technology
    Elsevier Inc  2017
    Abstract
    A precise and compact tubular ultrasonic motor driven by a single-phase source is proposed and tested in this study. The motor is designed by modeling a motor stator in FEM software. The motor fabricated according to the design is tested experimentally and its working characteristics including speed and torque are measured and presented. The maximum speed and torque of the motor are 59 rpm and 0.28 mN m at 80 Vpp of applied voltage. The proposed motor possesses advantages such as a simple and compact structure with application in the fields of robotics, space, medical devices and high-resolution stages, among others. The proposed motor is a good candidate for applications where accurate... 

    Design and manufacturing of ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area

    , Article Measurement: Journal of the International Measurement Confederation ; Volume 109 , 2017 , Pages 425-431 ; 02632241 (ISSN) Dabbagh, V ; Sarhan, A. A. D ; Akbari, J ; Mardi, N. A ; Sharif University of Technology
    2017
    Abstract
    Ultrasonic motor working with coupled in-plane and out-of-plane vibration modes of rectangular plate is proposed and experimentally investigated. Thanks to its unique configuration, proposed motor provides large contact area between stator and rotor of motor which can reduce wear and enhance motor life-time. The proposed motor is designed using finite element method and according to the design, a prototype is fabricated and its working characteristics such as speed, normal and driving force and working frequency are measured. Overall dimension of designed prototype is 49 × 14 × 2 mm, working frequency of motor is 49.6 kHz, no-load speed and stall force of motor are 122 rpm and 0.32 mN m at... 

    Applying ultrasonic vibration to decrease drilling-induced delamination in GFRP laminates

    , Article Procedia CIRP, Leuven ; Volume 6 , April , 2013 , Pages 577-582 ; 22128271 (ISSN) Mehbudi, P ; Baghlani, V ; Akbari, J ; Bushroa, A. R ; Mardi, N. A ; Sharif University of Technology
    2013
    Abstract
    Delamination is a major problem in drilling of fiber-reinforced composite materials. Thrust force is an important factor leading to propagation of delamination during drilling process. One of effective methods to reduce machining forces is application of ultrasonic vibrations. In this study ultrasonic assisted drilling is applied to reduce thrust force in drilling of GFRP laminates. In order to conduct experiments a setup is designed and fabricated to apply both vibrations and rotation to drill bits. Using Taguchi method, a set of experiments is conducted with feed rate, spindle speed, and ultrasonic vibration amplitude as control factors. The results show that applying ultrasonic vibration... 

    Controlled electrophoretic deposition of electrochemically exfoliated graphene sheets on Ag nanowires network

    , Article Micro and Nano Letters ; Volume 14, Issue 4 , 2019 , Pages 389-393 ; 17500443 (ISSN) Malekshahi Byranvand, M ; Tajabadi, F ; Mardi, S ; Taghavinia, N ; Amiri Zarand, A ; Dabirian, A ; Sharif University of Technology
    Institution of Engineering and Technology  2019
    Abstract
    Electrochemical exfoliation of graphite has recently attracted a big attention as a simple, fast and scalable method for the preparation of high quality graphene, but there are some drawbacks that hinder its application. Direct deposition is one of the most critical challenges that makes it difficult to deposit uniform, compact and large scale graphene thin films. This work develops a facile electrophoretic deposition route to fabricate exfoliated graphene (EG) film on Ag nanowires (NWs) networks with a controllable film thickness in nanometers scale. EG thin films are deposited with different applied potentials and times from an EG dispersion in N, N-dimethylformamide solvent. Since... 

    Performance of three-level spectrally encoded spreadtime CDMA in the presence of multiple interferences [electronic resource]

    , Article IET Communications ; July 2011, Volume 5, Issue 10, P. 1328-1335 Mashhadi, S. (Saeed) ; Mashhadi, Saeed ; Salehi, J. A ; Sharif University of Technology
    Abstract
    In this study the authors present an in-depth study, analysis and discussion on maximum likelihood (ML)-based receiver for a typical spectrally encoded spread-time CDMA in the presence of multiple narrowband interference (NBI) signals in an additive white Gaussian noise channel. Furthermore, the authors demonstrate that by combining useful properties of ML-based receiver and three-level codes, that is, codes with values of -1, 0, +1, the authors can introduce a new strategy in which superior performance with respect to previous receiver structure based on two-level codes, that is, codes with values of -1, +1, can be attained. With the help of an example, the authors drive, first, the... 

    Investigation of Multiphase Flow in Oil Wells (with Focus on Two Phase Flow), Flow Pattern Recognition and Modeling

    , M.Sc. Thesis Sharif University of Technology Shams, Reza (Author) ; Shad, Saeed (Supervisor) ; Jamshidi, Saeed (Supervisor)
    Abstract
    The concurrent flow of oil and water is a common occurrence in the field of multiphase flow in different fields including petroleum industry. In oil and gas, production engineers often face a situation in which more than one phase is flowing through the producers. In such conditions an accurate assessment of pressure loss inside the well plays a vital role in efficient and effective production planning. Changes in well orientation, wellbore diameter, reservoir and fluid properties as well as fluid flow rates are among parameters in which will affect the flow patterns that can occur inside a well during its life time. These flow patterns are created as a result of a competition between... 

    Casing Design Optimization Considering Drilling and Production Conditions

    , M.Sc. Thesis Sharif University of Technology Sadeghi, Mahdi (Author) ; Jamshidi, Saeed (Supervisor) ; Shad, Saeed (Supervisor)
    Abstract
    Casing design is one of the most expensive parts in the drilling of oil wells, and any cost reduction with the basic design of these casing strings will significantly reduce the total cost of the operation. In recent years, occurring scenarios-based casing design has become popular; Because in many cases, it eliminates non-occurring scenarios such as gas kick and saves on drilling costs. In this study, we have tried to investigate all scenarios that may occur during the lifetime of the well, whether drilling or production, and for each well, based on its own field information, possible scenarios for each casing part are selected separately and the applying loads are calculated. For this... 

    PRI (Palm Rotation Indicator): a metric for postural stability in dynamic nonprehensile manipulation [electronic resource]

    , Article Journal of MECHANIKA ; 2012, Vol. 18, No. 4, pp. 461-466 Beigzadeh, B. (Borhan) ; Meghdar, Ali ; Sohrabpour, Saeed ; Sharif University of Technology
    Abstract
    In this study, we discuss the postural stability of a nonprehensile manipulation problem, which deals with multibody objects. As a metric for postural stability, we define PRI. Then, the system is posturally stable, if PRI is inside the convex hull of the object-manipulator contact surface. We then discuss that dynamic biped locomotion is a special case of dynamic nonprehensile manipulation in all aspects; we prove that ZMP (zero-moment point) and FRI (zoot rotation indicator) are special cases of PRI (palm rotation indicator). Simulations and experiments corresponding to simple examples support the results  

    On the Domination Polynomial of Graphs

    , M.Sc. Thesis Sharif University of Technology Ebrahimi, Zeinab (Author) ; Akbari, Saeed (Supervisor)

    Some Applications of Combinatorial Nullstellensatz in Graph Theory and Combinatorics

    , M.Sc. Thesis Sharif University of Technology Fakhari, Amin (Author) ; Akbari, Saeed (Supervisor)

    Electrochemical Determination of Piroxicam at thin Carbon
    Nanoparticle Composite And Investigation of the Electrochemical Behavior and Synthesis of Catechols in the Presence of Mercapto Methyl Tetrazol as a Nucleophile

    , M.Sc. Thesis Sharif University of Technology Jokar, Effat (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    The electrochemical oxidation behavior of the anti-inflammatory drug piroxicam was investigated. A carbon nanoparticle (CNP)-chitosan (CS) film-coated graphite electrode (PGE) was fabricated and the electrochemical behaviors of piroxicam on its surface was investigated by the means of cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). In comparison to the bare PGE, at the surface of the CNP-CS film modified electrode, the oxidation peak current of piroxicam increased significantly and the peak potential shifted negatively. Consequently, a simple and sensitive electroanalytical method was developed for the determination of piroxicam. The... 

    Chemically Modified Electrodes Based on Conducting Polymers and Carbon Nanotubes: Application to Voltammetric Determination of Some Biological and Pharmaceutical Compounds

    , M.Sc. Thesis Sharif University of Technology Asadian, Elham (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. In the first part of this thesis, a new type of modified electrodes, constructing multi-walled carbon nanotubes (MWCNTs) and polypyrrole is prepared in a layer-by-layer process. In this procedure, the glassy carbon electrode is casted first by a drop suspension of MWCNTs, leading to formation a thin film on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNTs pre-coated electrode. The modification... 

    Probing the Electrochemical Properties of Gold Electrode Modified with Edge-Functionalized Graphene and its Application

    , M.Sc. Thesis Sharif University of Technology Aghajani, Talin (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    In the present work, edge-functionalaized graphene was used as electrode material and its electrochemical properties were systematically characterized by electrochemical impedance spectroscopy and cyclic voltammetry. Two methods were applied to modify the gold electrode surface. First method was the self assembling process of graphene nanosheets on gold electrode surface. Second method was simply casting specific amounts of graphene suspension on the gold electrode surface. Nyquist plots show decrease of the charge transfer resistance on the electrode surface at both cases. In cyclic voltammetry studies, first electrode shows no significant changes while the second electrode exhibits... 

    Probabilistic Methods in Graph Coloring

    , M.Sc. Thesis Sharif University of Technology Ahadi, Arash (Author) ; Akbari, Saeed (Supervisor)
    Abstract
    Graph Theory and Combinatorial Analysis like the other branches of science use the probability for solving their problems. At the first , we will introduce the most common tools from probability used in Discrete Mathematics, such as “The Lovasz Local Lemma”. Most of them are based on Linearity of Expectation, Concentration Theorems and some other innovative methods such as Deletation Method. We will present different examples for these techniques. Also we will introduce “Random Graphs” and their importance. Specially we will explain how to use “Threshold Functions” to obtain different properties about the majority of graphs. Rainbow Connection, is a natural and interesting quantifiable way... 

    Electrochemical Determination of Tyrosine and Tryptophan at the Surface of Pyrolytic Graphite Electrode Modified with Multi-Walled Carbon Nanotubes, New Coccine and Nitrazine

    , M.Sc. Thesis Sharif University of Technology Ebrahimi, Shiva (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    At the first part of this thesis, a pyrolitic graphite electrode (PGE) modified with new coccine/multi-walled carbon nanotubes film (NC/MWCNT) was applied as a sensitive electrochemical sensor for determination and study of electrochemical behavior of tyrosine (Tyr) in aqueous solutions. The results showed that NC/MWCNT caused a remarkable increase in the peak current so the NC/MWCNT/PGE electrode surface was far more sensitive to the concentration of Tyr than the PGE surface. The determination of Tyr was investigated by linear sweep voltammetry (LSV). Experimental parameters, such as scan rate, pH and amount of the modifier used on the PGE surface were optimized by monitoring the LSV... 

    The Regular Graph Retated to Rings

    , M.Sc. Thesis Sharif University of Technology Jamaali, Mohsen (Author) ; Akbari, Saeed (Supervisor)
    Abstract
    There are many papers in which some graphs are assigned to algebraic structures such as rings groupsThe concept of regular graph related to a ring was rst investigated by DF Anderson and A Badawi in Assume that R is a commutative ring and Z??R denotes the set of zerodivisors of R and Reg??R R n Z??R The regular graph of R which is denoted by Reg????R is a graph whose vertex set is Reg??R and two vertices x and y are adjacent if and only if x y ?? Z??R This can be generalized to a non commutative ring For the vertex set we consider the set of left ??right zerodivisors and join two elements if their sum is a left ??right zerodivisor Let R be the ring of n n matrices over a eld F with... 

    Zero-sum Flows in Graphs

    , M.Sc. Thesis Sharif University of Technology Nategh, Emisa (Author) ; Akbari, Saeed (Supervisor)
    Abstract
    For an undirected graph G, a zero-sum flow is an assignment of non-zero real numbers on the edges of G such that the total sum of all edges incident with any vertex of G is zero. A zero-sum k-flow for a graph G is a zero-sum flow with labels from the set {±1, . . . , ±(k ? 1)}. In this thesis for a graph G, a necessary and sufficient condition forthe existence of zero-sum flow is given. It has been conjectured that if a graph G has azero-sumflow, then it has a zero-sum 6-flow. Also, it has been proved that this conjectureand Bouchet’s Conjecture for bidirected graphs are equivalent. It is shown that the con-jecture is true for 2-edge connected bipartite graphs, and every r-regular graph...