Sharif Digital Repository

Given a graph G with a set of terminals, two weight functions c and d defined on the edge set of G, and a bound D, a popular NP-hard problem in designing networks is to find the minimum cost Steiner tree (under function c) in G, to connect all terminals in such a way that its diameter (under function d) is bounded by D. Marathe et al. (J. Algoritm. 28(1), 142–171, 1998) proposed an (O(lnn),O(lnn)) approximation algorithm for this bicriteria problem, where n is the number of terminals. The first factor reflects the approximation ratio on the diameter bound D, and the second factor indicates the cost-approximation ratio. Later, Kapoor and Sarwat (Theory Comput. Syst. 41(4), 779–794, 2007)... 

We present a nonlinear geometric approach to fault detection and isolation (FDI) in a grid-connected inverter system. Open-switch faults in inverter power transistors together with faults in grid voltages and source current sensors are detected and isolated in the presence of disturbance. The detection process is based on dynamic model of an inverter, including a dc-bus capacitor and an output RL filter. The proposed FDI system does not rely on balanced or zero-sum conditions in the grid point and is functional under nonsinusoidal voltages and currents. IEEE  

This paper presents a nonlinear geometric approach to fault detection and isolation (FDI) in grid-connected inverters. Faults are considered in inverter switches as well as in grid voltage and source current sensors. The FDI system is not sensitive to load variations or grid transients. No assumptions on balanced, zero-sum or sinusoidal form of voltages or currents are made. The resulting residual converges to zero in no-fault condition such that no threshold adjustment is needed. Simulations demonstrate performance of the proposed FDI system in presence of unknown disturbance. © 2018 IEEE  

We present a nonlinear geometric approach to fault detection and isolation (FDI) in a grid-connected inverter system. Open-switch faults in inverter power transistors together with faults in grid voltages and source current sensors are detected and isolated in the presence of disturbance. The detection process is based on dynamic model of an inverter, including a dc-bus capacitor and an output $RL$ filter. The proposed FDI system does not rely on balanced or zero-sum conditions in the grid point and is functional under nonsinusoidal voltages and currents. © 1993-2012 IEEE  

Swage autofrettage process is used for internal forming and sizing of thick-walled tubes designed to withstand high internal pressures. In this process, a mandrel with a diameter slightly larger than that of the tube is pressed inside the tube and in so doing, creates the internal profile. This paper presents an experimental and numerical study of this process. Two dimensional axi-symmetric and three dimensional finite element analyses are used to investigate the effects of workpiece and mandrel geometry on the forming load and part quality. Experiments are carried out to validate the numerical results. © 2005 Elsevier Ltd. All rights reserved  

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,... 

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of... 

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition  

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions  

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation