Sharif Digital Repository

In the present study, the mechanical properties of vertically aligned carbon nanotube (VACNT) arrays in the most general case of anisotropic elasticity is studied. To quantify the elastic stiffness coefficients, continuum mechanics is employed, in which the constitutive relation is formulized in terms of the interatomic potential obtained via molecular dynamics (MDs) simulations. Detailed investigations into elastic stiffness coefficients with different geometrical parameters are performed and, consequently, their sensitivity on length and radius parameters is hereby studied. With such study it would be possible to tune the mechanical properties of VACNTs. © 2019, Società Italiana di Fisica... 

To synthesize a novel biopolymer-based superabsorbent hydrogel, 2-acrylamido-2-methylpropanesulfonic acid (AMPS) was grafted onto kappa-carrageenan (KC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N',N'-tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N'-methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for KC-g-AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature,... 

The effect of an impact polypropylene copolymer (IPC) having excellent stiffness–toughness balance on the microstructure and properties of a blend comprising 80 wt% recycled high density polyethylene (rHDPE) and 20 wt% recycled isotactic polypropylene (rPP) was studied. Morphological observations revealed improved interfacial interactions, a finer dispersion state and a more homogeneous phase morphology upon IPC incorporation into the blend up to 20 wt%. Flexural modulus, flexural strength, tensile strength and tensile ductility were steadily increased with IPC loading, and exhibited 13%, 14%, 35% and 520% improvement at 20 wt% IPC. A monotonic rise in Izod impact energy, accompanied by a... 

To synthesize a novel biopolymer-based superabsorbent hydrogel, 2-acrylamido-2-methylpropanesulfonic acid (AMPS) was grafted onto kappa-carrageenan (ΚC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′-tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′-methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for ΚC-g-AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature,... 

To tackle the air pollution issues, Plug-in Hybrid Electric Vehicles (PHEVs) are proposed as an appropriate solution. Charging a large amount of PHEV batteries, if not controlled, would have negative impacts on the distribution system. The control process of charging of these vehicles can be centralized in parking lots that may provide a chance for better coordination than the individual charging in houses. In this paper, an optimization-based approach is proposed to determine the optimum PHEV parking capacities in candidate nodes of the distribution system. In so doing, a profile for charging and discharging of PHEVs is developed in order to flatten the network load profile. Then, this... 

This work studies the nonlinear oscillations of an elastic rotating shaft with acceleration to pass through the critical speeds. A mathematical model incorporating the Von-Karman higher-order deformations in bending is developed to investigate the nonlinear dynamics of rotors. A flexible shaft on flexible bearings with springs and dampers is considered as rotor system for this work. The shaft is modeled as a beam and the Euler-Bernoulli beam theory is applied. The kinetic and strain energies of the rotor system are derived and Lagrange method is then applied to obtain the coupled nonlinear differential equations of motion for 6 degrees of freedom. In order to solve these equations... 

This work studies the nonlinear oscillations of an elastic rotating shaft with acceleration to pass through the critical speeds. A mathematical model incorporating the Von-Karman higher-order deformations in bending is developed and analyzed to investigate the nonlinear dynamics of rotors. A flexible shaft on flexible bearings with springs and dampers is considered as rotor system for the present work. The shaft is modeled as a beam with a circular cross-section and the Euler Bernoulli beam theory is applied. The kinetic and strain energies of the rotor system are derived and Lagrange method is then applied to obtain the coupled nonlinear differential equations of motion for 6° of freedom.... 

This work studies the nonlinear oscillations of an elastic rotating shaft with acceleration to pass through the critical speeds. A mathematical model incorporating the Von-Karman higher-order deformations in bending is developed and analyzed to investigate the nonlinear dynamics of rotors. A flexible shaft on flexible bearings with springs and dampers is considered as rotor system for the present work. The shaft is modeled as a beam with a circular cross-section and the Euler Bernoulli beam theory is applied. The kinetic and strain energies of the rotor system are derived and Lagrange method is then applied to obtain the coupled nonlinear differential equations of motion for 6° of freedom.... 

The first phase of the Alborz Observatory Array (Alborz-1) consists of 20 plastic scintillation detectors each one with surface area of 0.25 m2 spread over an area of 40×40 m2 realized to the study of Extensive Air Showers around the knee at the Sharif University of Technology campus. The first stage of the project including construction and operation of a prototype system has now been completed and the electronics that will be used in the array instrument has been tested under field conditions. In order to achieve a realistic estimate of the array performance, a large number of simulated CORSIKA showers have been used. In the present work, theoretical results obtained in the study of... 

Much attention has been directed to different aspects of the design of pipelines. Design of the control logic of non-linear pipelines has however, been considered as a subsidiary issue in that an RTL description for such logic can easily be obtained from a behavioral description, with the use of widely available synthesis tools. But, as the complexity of a non-linear pipeline increases, so does the complexity of the control logic. The complexity may be to an extent that obtaining even a behavioral description for the control logic is rendered difficult. This paper focuses on further automating the development of systems consisting of non-linear or multi-function pipelines by proposing an... 

We report different morphologies of nanodroplets over various topographical features of the supporting substrates. The effects of different parameters such as the profile of the disjoining pressure, droplet size and the geometrical parameters are studied and discussed. Also, the effects of a coating layer on the surface of the substrate are determined. It is demonstrated that the nanodroplets at some positions are not stable and gradually move to more stable positions so that the system has less energy. For grooves this results in a series of morphology diagrams of the nanodroplets over the grooves as a function of the grooves' width and the liquid volume