Sharif Digital Repository

In this research, the galvanized steel with thickness of 2 mm was joined to the 5754 aluminum alloy with thickness of 3 mm by the cold metal transfer MIG welding–brazing process. The effect of the filler wires (AlSi3Mn, AlSi5, and AlSi12) and wire feed speeds (4.7, 5, and 5.3 m/min) on metallurgical and mechanical properties have been discussed. According to the experimental results, thickness of intermetallic compound (IMC) layer which was formed along the interface during the MIG welding–brazing was varied by changing of parameters. In addition, the results indicated that by increasing of the wire feed speed, the thickness of IMC layer at first decreased and then increased. Results... 

At present study, Endurance Time (ET) method that is a new dynamic pushover procedure is introduced and its application in predicting concrete arch dam behavior in linear domain is investigated. In this method structure is subjected to gradually intensifying acceleration functions. DEZ arch dam was selected as case study. FE model of dam-reservoir-foundation was excited in three levels of MCL, MDL, DBL using six records scaled based on design spectrum of the site and results were compared with those obtained from ET analyses. It was found that results obtained from ET method at equivalent target time are in good agreement with extreme results obtained from exciting the system using natural... 

One of the methods in limiting tensile stresses in arch dams and removing stress concentrations at the dam-foundation interface is setting the dam body on a concrete saddle called a Pulvino. In the present study, the effects of Pulvino and peripheral joints on the static behavior and seismic performance of arch dams are investigated. Dez Dam with a height of 203 m was selected as a case study and all contraction joints of the dam body were modeled using the discrete crack approach based on as-built drawings. Also, the surrounding rock was modeled as a mass-less medium tied to Pulvino. The dam-reservoirfoundation system was analyzed under static loads accounting for stage construction... 

Abstract. Structural collapse is the main concern for the existing structures which are built in the seismic-prone regions. Therefore, the primary goal of the seismic provisions in building codes is to prevent the global collapse. Iran is located in the Alpine-Himalayan belt, and has experienced some of the most destructive earthquakes in the past century. To evaluate the extent to which the Iranian building code provisions meet the abovementioned objective, the authors conducted a detailed assessment of collapse risk on a set of moderate moment resisting Reinforced Concrete (RC) buildings. While many features might affect the seismic performance of the RC structures, this study considers... 

The current performance-based seismic assessment procedure can be computationally intensive as it requires a large number of time history analyses (THA) each requiring time intensive post-processing of results. This study proposes the endurance time analysis (ETA) method as an alternative method to THA and incremental dynamic analysis (IDA). ETA is a time history based dynamic pushover procedure that applies a set of gradually intensifying acceleration functions to the structure and monitors the performance of the building accordingly. In this paper, the application of ETA in the seismic assessment of multistory steel concentrically braced frames is compared with THA and IDA methods.... 

At the present study, application of endurance time analysis (ETA) method in seismic evaluation of arch dams is investigated. ETA is a time-history based dynamic pushover procedure, which utilizes a set of predesigned intensifying acceleration functions to estimate the responses of the structural systems in various seismic excitation levels. Dez dam was chosen as the case study and all contraction and peripheral joints were modeled based on as-built drawings. The reservoir was modeled as a compressible medium and the foundation was assumed to be massless. Results show that ETA method is able to estimate dynamic responses of the dam with acceptable accuracy in comparison with time history... 

Emerging non-volatile memories (NVMs) are known as promising alternatives to SRAMs in on-chip caches. However, their limited write endurance is a major challenge when NVMs are employed in these highly frequently written caches. Early wear-out of NVM cells makes the lifetime of the caches extremely insufficient for nowadays computational systems. Previous studies only addressed the lifetime of data part in the cache. This paper first demonstrates that the age bits field of the cache replacement algorithm is the most frequently written part of a cache block and its lifetime is shorter than that of data part by more than 27×. Second, it investigates the effect of age bits wear-out on the cache... 

A recent method in the seismic assessment of structures is Endurance Time Analysis (ETA). ETA is a time-history-based dynamic pushover procedure, in which structures are subjected to gradually intensifying acceleration functions called Endurance Time Acceleration Functions (ETAFs), and their performances are evaluated based on the equivalent intensity level that they can endure while satisfying required performance goals. In this paper, the accuracy of the ETA in the seismic assessment of steel moment resisting frames is compared with the Time History Analysis (THA) and Incremental Dynamic Analysis (IDA) methods. For this purpose, a set of mid-rise and high-rise frames were selected as a... 

How does society work? How do groups emerge within society? What are the effects of emotions and memory on our everyday actions? George Homans, like us, had a perspective on what society is, except that he was a sociologist. Homans theory, which is an exchange theory, is based on a few propositions about the fundamental actions of individuals, and how values, memory, and expectations affect their behavior. In this paper, as Homans predicted, our main interest and purpose are to find out whether these propositions lead to the emergence of groups. To do so, computationally, Based on Homans’ prepositions, we provide the opportunity for each agent to exchange with other agents. That is, each...