Sharif Digital Repository

Ethylene dichloride thermal cracking is one of the conventional methods for hydrogen chloride production. A critical issue concerned with this method is to provide thermal energy for cracking reaction, which is generally provided by the flammable gasses inside the furnace. Utilizing renewable energy sources can be an interesting topic in this case. Hence, in this paper, the thermal integration feasibility of an ethylene dichloride cracking unit with a hybrid renewable plant, based on geothermal and wind energies, is investigated, while the case study for wind turbines system (Alstom ECO 74/1670/ Class II model) is Meshkin Shahr, located in Iran. To utilize geothermal energy, a... 

This research work presents a novel integrated structure for the cogeneration of electricity and renewable syngas. The base structure of the process is developed by solid oxide cells in which electricity is generated by the natural gas-fueled fuel cell unit, and renewable syngas is produced by the electrolyzer cell unit. Direct integration between fuel cell and electrolyzer cell units is established for optimal use of fuel cell off-gases. To improve system's sustainability, a solar power cycle, including solar collectors coupled with an organic Rankine cycle (ORC), is designed to provide renewable electricity for steam and CO2 co-electrolysis operation. 1D mathematical approaches are... 

The behaviour of an industrial refrigeration cycle with refrigerant propane has been investigated by the exergy method. An natural gas liquid recovery unit with its refrigeration cycle has been simulated to prepare the exergy analysis. Using a typical actual work input value; the exergetic efficiency of the refrigeration cycle is determined to be 26.51 % indicating a great potential for improvements. The obtained simulation results reveal that the exergetic efficiencies of the air cooler(s) and chilling sections get the lowest rank among the other compartments of refrigeration cycle. Refrigeration calculations have been carried out through the analysis of T-S and P-H diagrams where... 

The power-to-liquid concept is a promising strategy to convert the power plants' flue gas to value-added liquid fuels using renewable energy. This technology could potentially reduce global greenhouse gases emissions and mitigate the environmental problems associated with the fossil fuels industry. In this regard, the main objective of the present study is to propose a novel power-to-liquid plant for the synthesis of formic acid and ammonia from power plants' flue gas, emphasizing the role of electrochemical technologies and renewable energy. The system's basis is developed by the integration of CO2 electroreduction cell, alkaline water electrolysis cell, and photovoltaic panel technologies.... 

By generalising dictionary learning (DL) algorithms to multidimensional (MD) mode and using them in applications where signals are inherently multidimensional, such as in three-dimensional (3D) inverse synthetic aperture radar (ISAR) imaging, it is possible to achieve much higher speed and less computational complexity. In this study, the formulation of the multidimensional dictionary learning (MDDL) problem is expressed and two algorithms are proposed to solve it. The first one is based on the method of optimum directions (MOD) algorithm for 1D dictionary learning (1DDL), which uses alternating minimisation and gradient projection approach. As the MDDL problem is non-convex, the second... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages  

We study a classical problem in communication and wireless networks called Finding White Space Regions. In this problem, we are given a set of antennas (points) some of which are noisy (black) and the rest are working fine (white). The goal is to find a set of convex hulls with maximum total area that cover all white points and exclude all black points. In other words, these convex hulls make it safe for white antennas to communicate with each other without any interference with black antennas. We study the problem on three different settings (based on overlapping between different convex hulls) and find hardness results and good approximation algorithms