Sharif Digital Repository

Structural and superconducting behaviors of Gd(Ba2-xNd x)Cu3O7-δ with 0.0 ≤ x ≤ 0.8 have been studied by X-ray diffraction and electrical and magnetic measurements. The XRD patterns show the samples with x ≤ 0.5 are isostructure 123 phase, and an orthorhombic-tetragonal phase transition occurs at x = 0.2. The transition temperature decreases linearly with increasing Nd content. This behavior is also observed in the curves of the room-temperature resistivity versus Nd doping. The metal-insulator and superconductor-insulator transitions occur at x cMIT = 0.3 and x0SIT = 0.35, respectively. The conduction mechanisms of the normal-state resistivity are the Coulomb gap (CG) for x < xcMIT ,... 

We have studied the electrical and magnetic properties of single phase polycrystalline Gd(Ba2-x Lax)Cu3O 7+δ and Gd(Ba2-xNdx)Cu3O 7+δ (0≤ x ≤ 0.5) samples. The samples were prepared by the standard solid-state reaction technique. The electrical measurements show the decrease of Tc and increase of ΔTc with the increase of Nd and La-doping. The magnetoresistance of samples has been studied within the thermally activated flux creep (TAFC) model. The pinning energy decreases with the increase of magnetic field and doping for both systems in a similar way. The decrease of pinning energy with applied magnetic field can be scaled with two power law relations for the magnetic field: smaller and... 

We have studied the electrical and magnetic properties of RuGd 2-xCexSr2Cu2O10-δ (Ru-1222) with content of Ce = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, prepared by the standard solid-state reaction technique. To determine how the magnetic and superconducting properties of this layered cuprate system can be affected by Ce substitution, the resistivity and magnetoresistivity have been measured at various temperatures. Resistivity curves reveal the presence of four regions for various contents of x. In high temperatures, system is paramagnetic. Magnetic transition from paramagnetic state to antiferromagnetic state occurs at 140 K for x = 0, which varies very slowly with increasing Ce substitution for Gd.... 

We have studied the electrical and magnetic properties of normal and superconducting states of RuGd1.6Ce0.4Sr 2Cu2O10-δ (Ru-1222) system, prepared by the standard solid-state reaction technique, with applied magnetic field. The resistivity curves show that at high temperature the system is paramagnetic. At lower temperature, we can observe two magnetic transitions from paramagnetic state to anti-ferromagnetic and from anti-ferromagnetic to ferromagnetic. At room temperature the resistivity of sample shows insulating behavior and superconducting transition occurs at 45 K. Superconducting and magnetic parameters such as superconducting transition temperature Tc, magnetic transition Tirr, have... 

Homopolymer hydrogel of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and its nanocomposite counterpart were prepared to study their swelling properties. The hydrogels showed ability to absorb and retain electrolytes as well as binary mixtures of water and organic solvents (i.e., methanol, ethanol, acetone, ethylene glycol (EG), polyethylene glycol, N-methyl-2-pyrrolidone (NMP), and dimethylsulfoxide (DMSO). The nanocomposite gel exhibited lower swelling in all solvent compositions in comparison with non-composite gel. Unlike conventional acrylic acid-based hydrogels, the poly(AMPS) gels showed superabsorbing capacity in pure ethanol, methanol, EG, DMSO and NMP. Meanwhile, swelling... 

As the result of safety factors considered in load and resistant values for the design of new offshore platforms, a higher resistance compared to the 100 year return period environmental loading, is achieved in the structure. This type of design is usually performed using linear methods of structural analysis. In this case the structure practically has a high reserve capacity which is disregarded in the design phase but may be considered in special cases. One of these important cases is when an existing structure is assessed and evaluated after elapse of its structural life. In this case using the platforms reserve capacity, through a non-linear analysis such as push-over, would be logical... 

In this review, effects of initial microstructure before intercritical annealing and processing routes of dual phase (DP) high strength steels are discussed. Prior-applied deformation processes as cold rolling and severe plastic deformation (SPD) including their impacts on mechanical properties of DP steels are described. Influences of heating rate, recrystallization of ferrite, nucleation and grain growth of austenite on the microstructure evolution are also presented. The intercritical annealing and thermomechanical processes of DP steels are comparatively outlined. Furthermore, post-intercritical annealing treatments, i.e., tempering, bake hardening, strain and quench aging are argued.... 

Scratchpad memory (SPM) is widely used in modern embedded processors to overcome the limitations of cache memory. The high vulnerability of SPM to soft errors, however, limits its usage in safety-critical applications. This paper proposes an efficient fault-tolerant scheme, called cache-assisted duplicated SPM (CADS), to protect SPM against soft errors. The main aim of CADS is to utilize cache memory to provide a replica for SPM lines. Using cache memory, CADS is able to guarantee a full duplication of all SPM lines. We also further enhance the proposed scheme by presenting buffered CADS (BCADS) that significantly improves the CADS energy efficiency. BCADS is compared with two well-known... 

Accurate and early detection of anomalies in peripheral white blood cells plays a crucial role in the evaluation of well-being in individuals and the diagnosis and prognosis of hematologic diseases. For example, some blood disorders and immune system-related diseases are diagnosed by the differential count of white blood cells, which is one of the common laboratory tests. Data is one of the most important ingredients in the development and testing of many commercial and successful automatic or semi-automatic systems. To this end, this study introduces a free access dataset of normal peripheral white blood cells called Raabin-WBC containing about 40,000 images of white blood cells and color... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...