Loading...
Search for:
mobarhan-bonab--mohammad-ali
0.153 seconds
Total 6912 records
Study of Microstructure and Hot Deformation Behavior of Aluminum Nanocomposites Reinforced with SiC Nanoparticles
, M.Sc. Thesis Sharif University of Technology ; Simchi, Abdolreza (Supervisor)
Abstract
Hot deformation behavior of Al-SiC nanocomposites was investigated in this study. Aluminum powders with mean size of 60 micron and SiC nanopowders (mean size of 45nm) in amounts of 1 and 2 volume percents, as reinforced part, were mixed and milled for 40 hours by planetary ball mill. After degassing at 450 oC for 1 hour, milled powders were pressed into Aluminum cans (in Argon atmosphere) and then hot extruded. Extrusion ratio was 1:14. High density billets (with 98% of theoretical density) were produced because of that high extrusion ratio. TEM microstructure studies showed that fine distribution of reinforcements and Aluminum Oxides obtained via this procedure. Hardness and Uniaxial...
Effect of silicon carbide nanoparticles on hot deformation of ultrafine-grained aluminium nanocomposites prepared by hot powder extrusion process
, Article Powder Metallurgy ; Volume 59, Issue 4 , 2016 , Pages 262-270 ; 00325899 (ISSN) ; Simchi, A ; Sharif University of Technology
Taylor and Francis Ltd
2016
Abstract
The flow behaviour of Al–SiC nanocomposites prepared by mechanical milling and hot powder extrusion methods was studied at different temperatures (350–500°C) and strain rates (0.005–0.5 s−1). The flow of the Powder metallurgy nanocomposites exhibited a peak stress followed by a dynamic flow softening behaviour. It was shown that mechanical milling increased high-temperature strain rate sensitivity of ultrafine-grained (UFG) aluminium while decreasing its flow dependence to temperature. Constitutive analysis of the hot deformation process by Zener–Hollomon parameter (Z) also indicated a remarkable increase in the deformation activation energy (about 40%). Likewise, SiC nanoparticles (up to...
Elasto-Plastic Design of Thick-Walled FG Vessels under Pressure or Temperature Gradient Loadings
, M.Sc. Thesis Sharif University of Technology ; Kargarnovin, Mohammad Hossein (Supervisor)
Abstract
Nowadays functionally graded materials have many applications in various industries. One of these applications can be the manufacturing of thick-walled vessels. Thick-walled vessels under internal pressure and high temperatures gradient require materials with higher strength, like Functionally Graded Materials (FGM) and can be reinforced by some mechanical processes like autofrettage. In this process under certain loading some part of vessels enters into plastic zone and upon unloading some residual stresses will be generated. Moreover it is very important to find out the depth of this plastic zone, In addition, minimizing the stress distribution vs. depth of plastic zone under applied...
Analysis Of Privacy Challenges In RFID Authentication Protocols
, M.Sc. Thesis Sharif University of Technology ; Aref, Mohammad Reza (Supervisor)
Abstract
Radio Frequency IDentification (RFID) is an increasingly important area in automatic identification. Low cost RFID tags (labels) are considered as the next generation of barcodes and their purpose is to compensate for shortcomings in computer recognition of objects using cameras. Supply chain management, access control, animal identification,e-passports along with the possibility of having e-health, e-agriculture and smart homes are few examples of RFID application developments. Despite its low cost, ubiquity, and widespread usage, RFID tags suffer from several major drawbacks, particularly information leakage and traceability. In RFID authentication protocols, both information leakage and...
Modification of carbohydrate polymers via grafting in air. 1. Ceric-Induced synthesis of starch-g-polyacrylonitrile in presence and absence of oxygen [electronic resource]
, Article Starch - Starke ; Volume 54, Issue 3-4, pages 140–147, April 2002 ; Zohurian Mehr, Mohammad J
Abstract
Monomer grafting, a unique technique for polysaccharide modification, is always performed under inert (e.g., N2) atmosphere. This work is the first report related to evaluating the possibility and efficiency of the grafting of acrylonitrile (AN) onto starch in presence of oxygen. Thus, corn starch (in both granular and gelatinized states) as well as soluble starch were grafted by AN using a ceric-carbohydrate redox initiating system. Graft copolymerizations were performed under nitrogen, air, and oxygen atmospheres at similar conditions. Grafting occurrence was verified using chemical and spectral proofs. The polymerization mechanism and kinetics were investigated by recording the...
Modification of carbohydrate polymers via grafting in Air. 2. Ceric-Initiated graft copolymerization of acrylonitrile onto natural and modified polysaccharides [electronic resource]
, Article Starch - Stärke ; Volume 54, Issue 10, pages 482–488, October 2002 ; Zohuriaan-Mehr, Mohammad J
Abstract
Acrylonitrile (AN) was grafted onto various natural and modified polysaccharides (i.e., gum arabic, gum tragacanth, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) by using ceric-carbohydrate redox initiating system. After overcoming practical problems, mainly from the high viscosity of the aqueous solutions of the different substrates, the graft copolymerization reactions were run either in air or in N2 atmosphere under similar conditions. Grafting was confirmed using chemical and spectral (FTIR) proofs. The reactions were kinetically investigated using semi-empirical expressions and time-temperature profiles. An anomalous...
Modeling of in Plane Behavior of Retrofitted Adobe Walls with Finite Element Method under Cyclic Loading
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor) ; Ghannad, Mohammad Ali (Co-Advisor)
Abstract
Statistical studies indicate the fact that in Iran, like many other developing countries, a significant percentage of buildings are made of traditional materials and most of them are adobe buildings especially in rural areas. Furthermore, geological data indicates that Iran is located in alps-Himalayas seismic zone and exposed by destructive earthquakes and adobe buildings suffer the most damages comparing with other type of the structures. According to these explanations, this research deals with adobe buildings behavior and provides solutions for reinforcing them and improving the seismic response of these buildings. These studies include numerical modeling with finite elements methods by...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
LQG Controller Design for Hover Flight Based on Model Helicopter System Identification, Using X-Plane
, M.Sc. Thesis Sharif University of Technology ; Banazadeh, Afshin (Supervisor)
Abstract
The subject of this study is design of a linear quadratic Gaussian controller based on identification of dynamic behavior of unmanned model helicopter “Raptor” in its hover flight. To achieve this end, first, the helicopter linear transfer functions are identified with frequency response method by applying specific inputs to the model of Raptor in the X-Plane software and receiving system outputs via Simulink. Next, using the identified dynamic model of the helicopter, an optimum linear controller is designed for hover flight. As an optimum linear controller needs all the state variables, a Kalman filter is utilized to estimate them, using outputs of various sonsors such as GPS and gyro....
Event related potentials extraction using low-rank tensor decomposition
, Article 30th International Conference on Electrical Engineering, ICEE 2022, 17 May 2022 through 19 May 2022 ; 2022 , Pages 931-935 ; 9781665480871 (ISBN) ; Shamsollahi, M. B ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2022
Abstract
Event-related potential (ERP) extraction from ongoing electroencephalograph (EEG) and its enhancement is one of the long-established problems in EEG signal processing. Most of the previous studies have focused mainly on the ERP enhancement without considering the multi-dimentional structure of the signal. In order to take advantage of this property, we propose a tensor-based solution with trial-by-trial concatenated ERP data. Then we develop an algorithm based on low-rank Tucker decomposition to detect single trial ERP component with maximized signal to noise ratio (SNR). In other words, by using tensor algebra we consider both self-similarity in intratrials and global correlation in spatial...
Distributed Fault-tolerant Computation for Massive Data
, M.Sc. Thesis Sharif University of Technology ; Maddah-Ali, Mohammad Ali (Supervisor)
Abstract
In this thesis we consider the problem of distributed computation by many processors.We mainly concentrate on matrix multiplication problem in this thesis because of its importance. A distributed system consists of N worker processors and one master processor. The master processor should distribute the computation between workers and after computation in each of them, collect the results. In this thesis, we are going to mitigate the effect of straggler processors by using coding methods. Straggler processors can cause delays in the computation time.In this thesis, we firstly introduce a method to multiply any number of matrices in each other. The proposed method occurred in one shot without...
Text Separation of Single-Channel Audio Sources Using Deep Neural Networks
, M.Sc. Thesis Sharif University of Technology ; Motahari, Abolfazl (Supervisor)
Abstract
The problem of separation of audio sources is one of the oldest issues raised in the field of audio processing, which has been studied for more than half a century. The main focus of recent research in this field has been on improving the sound quality resulting from the separation of sound sources with the help of deep neural networks. This is despite the fact that in most applications of audio source separation, such as the application of meeting transcription, we do not need the separated audio of people. Rather, we need a pipeline of converting overlapping speech to text, which, by receiving the audio in which several people have spoken, outputs the text spoken by the people present in...
Incomplete Reduction of Iron Ore in a Fluidized Bed Reactor
, M.Sc. Thesis Sharif University of Technology ; Halali, Mohammad (Supervisor)
Abstract
The main goal of current investigation was partial reduction of Fe2O3 available in Hematite-rich ore to Magnetite by Fludization Bed method. The reductive gas, CO, was produced by incomplete combustion of Acetylene and Airmixed in inappropriate ratio. X-Ray Diffraction and X-Ray Florescence analyses were implemented in order to conducting qualitative analysis of present phases before and after reduction of the ore. Quantitative analysis of the same phases was also conducted by Titration. The latter analysis revealed the precise magnitude of available iron in each of the oxide containing phases. The chemical composition of the reactor gas was also determined before and after reduction...
Sequential Competitive Facility Location In Continuous Geometric Space
, M.Sc. Thesis Sharif University of Technology ; Abam, Mohammad Ali (Supervisor)
Abstract
Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...
Distributed Verifiable Computing: Algorithms and Analysis
, M.Sc. Thesis Sharif University of Technology ; Maddah Ali, Mohammad Ali (Supervisor)
Abstract
Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run...
Privacy Preserving Communication Schemes for Light Clients in Blockchain Networks: Algorithms and Analysis
, M.Sc. Thesis Sharif University of Technology ; Pakravan, Mohammad Reza (Supervisor) ; Maddah Ali, Mohammad Ali (Co-Supervisor)
Abstract
Lightweight clients are a type of blockchain users who do not store all the blocks in the blockchain due to limited resources. These users store only a small part of each block and when needed, request transactions from full nodes that store the entire blockchain. These users have no role in block validation and only want to receive transactions related to their addresses with proof of the inclusion in the block from full nodes.Since light clients rely on full nodes for receiving transactions, their privacy against full nodes is important. The current implementation of Bitcoin uses Bloom filters for privacy, but this offers very little privacy to the users.In this thesis, we study the...
The Effect of Soli-Structure Interaction on Dynamic Characteristics of Structures with Embedded Fondation
, M.Sc. Thesis Sharif University of Technology ; Ghannad, Mohammad Ali (Supervisor)
Abstract
Soil-structure interaction has significant effect on dynamic behavior of the super structure. This effect is usually investigated in two separate parts, i.e., the Kinematic Interaction effect and the Inertial Interaction effect. The first modifies the input ground motion to the foundation as a result of difference in soil and foundation stiffness. The later, i.e., the II effect, introduces the effect of soil flexibility and radiation of waves into the supporting medium on the response of the structure. These effects are usually considered by introducing a replacement oscillator with modified natural period and damping ratio subjected...
Perusing Metal Perusing Metal Insulator Transistors with in the Dynamical Field Approximation at Finite Temperature
, Ph.D. Dissertation Sharif University of Technology ; Vesaghi, Mohammad ALi (Supervisor)
Abstract
The aim of this work is to investigate some theoretical models developed in recent years for describing electronic correlation and apply them to some special problems and metallicity and insulating behavior of one type of paramagnetic systems. One of the vast‐applied and effective routines for investigating the strongly correlated electron systems is Dynamical Mean Field Theory (DMFT). In the first part, the equations of DMFT are solved on nearly real frequency axis with a effective and more reliable solver a little parameter γ above the real axis. This approach appears fine structures that can’t be captured with the ...
On a Bounded Budget Network Creation Game
, M.Sc. Thesis Sharif University of Technology ; Safari, Mohammad Ali (Supervisor)
Abstract
In this thesis, we consider a network creation game in which, each player (vertex) has a limited budget to establish links to other players. In our model, each link has a unit cost and each agent tries to minimize its cost which is its local diameter or its total distance to other players in the (undirected) underlying graph of the created network. Two variants of the game are studied: in the MAX version, the cost incurred to a vertex is the maximum distance between that vertex and other vertices, and in the SUM version, the cost incurred to a vertex is the sum of distances between that vertex and other vertices. We prove that in both versions pure Nash equilibria exist, but the problem of...
Power System Load Frequency Control Considering Renewable Energy Sources
, M.Sc. Thesis Sharif University of Technology ; Ranjbar, Ali Mohammad (Supervisor)
Abstract
Power system frequency regulation entitled load frequency control (LFC) has been one of the important control problems in electric power system design and operation. Off-normal frequency can directly impact on power system operation and system reliability. A large frequency deviation can damage equipment, degrade load performance, cause the transmission lines to be overloaded and can interfere with system protection schemes, ultimately leading to an unstable condition for the power system . On the other hand, the increasing need for electrical energy in the 21st century, as well as limited fossil fuel reserves and the increasing concerns with environmental issues for the reduction of carbon...