Sharif Digital Repository

Low frequency (LF) O2 plasma was used to modify the surface of polysulfone (PSF) gas separation membranes. The effect of treatment time and plasma power input on the membranes was also investigated. Pure CO2 and CH4 gas permeation measurements were performed before and after plasma treatment. The results showed the increase of permeability of the treated membranes due to surface ablation and surface polarization. However, the CO2/CH4 permselectivity of the treated membranes varied from 7.7 to 45.3 depending on the treatment conditions. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy determined the introduction of oxygen containing polar groups on the surface... 

In spite of the fact that failures in distribution systems constitute a high percentage of customer’s interruptions, they have received less attention than generation and transmission systems at least in the amount of academic and industrial publications in the past decades. However as the business turns its attention to customers from consumers, focuses are moving toward power distribution systems in recent years. Its main problem that makes this high percentage of contribution in customer’s interruption is their widespread applications through all the places that there is a civilization. Contribution of many components in the system leads to high failure rate and because they spread every... 

Increasing in social communication via electronic ways has been made social network analysis of these communications more important each day. One of the most important aspects in social network analysis is community detection in such networks. There are many different ways to extract communities from social graph structure which in some of them the content of communication between actors has been noticed in community extraction algorithm. In this thesis after a short survey over advantages and disadvantages of existing methods for community detection, a new method for extracting communities from social networks has been suggested which in addition to streaming property of data it spot the... 

Studying the performance of flow meters is of great importance in order to improve their quality. In this study, we are looking for an optimal design for a turbine flow meter in which the measurement accuracy, pressure drop and response speed indices are improved. For this purpose, a turbine flow meter with a diameter of 2 inches has been selected and its performance has been numerically modeled using computational fluid dynamics in a steady and transient state. By modeling the steady state, the measurement accuracy and pressure drop indices are obtained, and by modeling the transient state, the response time of the flow meter is obtained. In order to increase the accuracy of numerical... 

One way to increase the efficiency and improve the performance of a gas turbine is to increase the inlet gas temperature. On the other hand, the inlet temperature has an allowable operating range, and increasing it beyond the tolerance of the alloys used in turbine blades causes structural defects and significantly reduces the blade life. Therefore, to increase the blade life, various cooling methods such as internal and layer cooling are used. Considering the blade geometry and cooling paths, accuracy in the manufacturing process is doubly important in the production of these blades. The importance of this issue is that if the cooling channels produced are inconsistent with the design... 

The standard model of Cosmology (SM), based on Einstein’s theory of general relativity (GR), is the best model in describing the cosmic-scale observations. In galactic scales, however, galactic dynamics show a discrepancy between the observed luminous mass and the predicted value from the theory. Two approaches are suggested to eliminate this inconsistency: assuming the existence of dark matter within the context of GR, or modifying the theory of gravity in galactic scales, like MOND or MOG. In this thesis, we study the spherical collapse and the formation of shell galaxies in MOG, in comparison with SM. We introduce the action and the field equations of MOG and the equation of motion of a... 

Strongly Rayleigh measures are an important class of negatively dependent (repulsive) probability measures. These measures are defined via a geometric condition, called “real stability”, on their generating polynomials, and have interesting probabilistic properties. On one important property of negatively dependent measures is their rigid dependence structure. In other words, the it is impossible for these measures to have strong overall dependencies. In this thesis, we study two manifestations if this phenomenon: (1) paving property and (2) tail triviality. Informally, the paving property states that it is possible to partition the set of the components of every strongly Rayleigh random... 

In this thesis, consider three important questions in the Iranian Wholesale Electricity Market (IWEM) and answer its. The first one is whether the bidding behavior of the firms in the IWEM has been ex-post optimal? The results of the research show that, on average, the firm’s bidding behavior didn’t optimal in the IWEM, and therefore the bidding strategy of them could be improved. This issue is importance from the regulatory viewpoint in terms of assessing market efficiency and market power of firms, as well as from the firm’s point of view to improve the bidding strategy and increase its profits. The second issue is the assessment of the firm’s ability to exercise unilateral market power by... 

Office buildings, as one of the largest energy consumers in the building sector, play a significant role in national energy consumption. Given the importance of energy optimization in achieving sustainable development, reducing energy consumption in these buildings not only lowers costs but also helps preserve natural resources and mitigate environmental impacts. In this regard, providing energy optimization solutions, improving efficiency, and revising operational patterns play a key role in reducing energy consumption and ensuring user comfort. On the other hand, attention to indoor air quality is equally critical, as polluted indoor air can negatively affect the health and productivity of... 

Multi-part rotating parts are used in various industries with very high revolutions. Therefore, the method of assembling each part and keeping the axis of rotation of each part close to the axis passing through two supports (bearings) is important. In this research, three main steps are followed, the development of the differential equations governing the multi-part rotating system and the calculation of the range of oscillations created at the critical points, and then the calculation of the optimal assembly angles with the aim of reducing the introduced oscillations, and finally the discussion of crossing the speeds A crisis is being investigated. The method of obtaining the system of... 

MQTT (Message Queuing Telemetry Transport) is one of the essential and widely used protocols in the Internet of Things (IoT) networks. It operates at the application layer (Layer 7) for data transmission. As IoT applications using this protocol for communication have grown, securing such systems against security attacks has become a significant challenge. One of the important attacks implementable by IoT networks is Distributed Denial of Service (DDoS) attacks. In this thesis, we initially provide a general overview of IoT security and demonstrate how DDoS attacks disrupt the availability feature in these networks. We then examine known types of DDoS attacks to gain a better understanding of... 

There are several methods for measuring thin film thickness, however, for the analysis of liquid film motors [1] we need a method which is capable of measuring the thickness using a single image of the film. In this work, we use the colors that appear on thin films, such as soup bubbles, which is a result of light interference to calculate the thickness of the layer  

One of the most elusive problems in quantum mechanics is the transition between classical and quantum physics. This problem can be traced back to the Schrodinger's cat. A key element that lies at the center of this problem is the lack of a clear understanding and characterization of macroscopic quantum states. Our understanding of Macroscopic Quantumness relies on states such as the Greenberger-Horne-Zeilinger(GHZ) or the NOON state. Here we take a first principle approach to this problem. We start from coherence as the key quantity that captures the notion of quantumness and demand the quantumness to be collective and macroscopic. To this end, we introduce macroscopic coherence which is the... 

With confidence in the recorded observations, the RLS method no longer estimates the recorded measurements by sensors, i.e. the displacement and speed of the floors, and only estimates the parameters. In contrast, in the EKF method, in addition to estimating the structure's parameters, a more precise estimation of the observations recorded by the sensors has been done by accepting the noise in the recorded observations. These methods, which are based on the Bayesian updating, investigate the two primary sources of uncertainty in a problem: a) measurement noise or observation noise, and b) process noise, which includes modeling errors. In these methodologies, the unknown system parameters,... 

Entanglement is one of the key resources of quantum information science which makes identification of entangled states essential to a wide range of quantum technologies and phenomena.This problem is however both computationally and experimentally challenging.Here we use autoencoder neural networks to find semi-optimal measurements for detection of entangled states. We show that it is possible to find high-performance entanglement detectors with as few as three measurements. Also, with the complete information of the state, we develop a neural network that can identify all two-qubits entangled states almost perfectly.This result paves the way for automatic development of efficient... 

The vortex tube is a simple device that injects compressed gas (air) tangentially into the vortex chamber through one or more injection nozzles. After entering, the flow becomes rotational and an axial cold flow goes towards the cold outlet and a peripheral hot flow goes towards the hot outlet. Besides all the different applications of the vortex tube, the main application of this device is cooling. Here, the goal is to optimize the geometry and physical conditions to improve the performance, which is done by using a commercial software and numerical analysis of a vortex tube to understand the flow physics and optimization. In this research, we use experimental and numerical data for...