Sharif Digital Repository

A novel rotary magnetohydrodynamic (MHD) (RMHD) micropump is presented in this paper in order to both benefit exclusive advantages from the MHD micropumps and eliminate the current obstacles in their implementation. Lorentz force, which is the actuation mechanism in RMHD, is used to propel a mercury slug in a circular microchannel in order to suck the working fluid from the inlet and pump it to the outlet. This idea is integrated with a valve which prevents the working fluid from passing through, while allowing the mercury slug to pass, during each pumping loop. The performance of a fabricated RMHD is evaluated, considering parameters such as pressure difference, running duration, electric... 

A novel molecularly imprinted xerogel (MIX) based on organically modified silica (ORMOSIL) was successfully prepared for on-line capillary microextraction (CME) coupled with high-performance liquid chromatography (HPLC). The sol-gel-based xerogel was prepared using only one precursor and exhibited extensive selectivity towards triazines along with significant thermal and chemical stability. Atrazine was selected as a model template molecule and 3-(trimethoxysilyl)propylmethacrylate (TMSPMA) as a precursor in which the propylmethacrylate moiety was responsible for van der Waals, dipole-dipole, and hydrogen-bond interactions with the template. This moiety plays a key role in creation of... 

This review is mostly focused on the recently emerged methodologies for preparing the appropriate extracting media with enhanced capacity, stability and selectivity, which could be used in capillary microextraction (CME). We particularly consider conductive polymers, sol-gel-based materials, monolithic coatings, molecularly-imprinted polymers and xerogels. Moreover, we discuss recent advances in configuration of CME, array capillaries and unbreakable substrates  

Fluid control, namely pumping and valving, is a critical factor in the performance of micro-fluidic systems. In recent years a variety of micro-fluidic systems are developed for the purpose of miniaturizing fluid handling, and chemical analysis to develop Lab On a Chip (LOC) technology. The mentioned facts resulted in design and fabrication of a novel hydromagnetic flow controller. The idea behind this device is that magnetic particles, mixed and dispersed in a carrier liquid, can be accumulated in the form of a piston. Depending upon dragging speed of these pistons, which itself is a function of switching time, this device can be used to either increase (pumping) or decrease (valving) the... 

The raising trend both in violent and property crime are of major concern in Iran. Using a panel data modeling (province wide), the paper provides an econometrics assessment of the relationship between crime against properties and violent crimes as functions of deterrent, social, economic and demographic factors in Iran, in the framework of Becker-Ehrlich crime supply theory. The findings indicate that, although deterrence hypothesis is not confirmed for burglary and assault, it explains the variations of murders and threats. Economic factors play key role in burglary and threat explanation, but they do not affect willful murders, however, Literacy explains both murders and threats. Average... 

A novel technique based on image processing inspired by the simple assumption for the first time to assess the roughness of nanofibrous mats based on grayscale variations is proposed. The height of a nanofibrous mat in different regions of the surface is simulated by grayscale variations in the image while the relation between grayscale and height is obtained as a linear function. The roughness is obtained by measuring height variations in the surface profile. Statistical roughness parameters of nanofibrous mats are also obtained from direct measurement with roughness profilometry and atomic force microscopy (AFM) for comparison of the roughness of nanofibrous mats between direct measurement... 

The results of three cases of two consecutive reactors are studied in two types of co-current and counter-current flow in second reactor where two consecutive reactors are oxidative coupling of methane (OCM) and Fischer-Tropsch (FT) reactors. FT reactor can be fixed bed or membrane fixed bed reactor with a hydrogen perm-selective membrane. Effect of CH4/O2 ratio, contact time, inlet temperature, and amount of N2 in OCM feed on C2 to C5+ hydrocarbons produced in FT reactor were studied. Results show that use of counter-current hydrogen-perm selective membrane FT reactor that sequenced after OCM reactor improves the C5+ yield as a desirable product and reduces the amount of CH4 and CO2 as... 

Due to great commercial application of protease, it is necessary to study kinetic characterization of this enzyme in order to improve design of enzymatic reactors. In this study, mathematical modeling of protease enzyme production kinetics which is derived from Bacillus licheniformis BBRC 100053 was studied (at 37°C, pH 10 after 73 h in stationary phase, and 150 rpm). The aim of the present paper was to determine the best kinetic model and kinetic parameters for production of protease and calculating K i (inhibition constant) of different inhibitors to find the most effective one. The kinetic parameters K m (Michaelis-Menten constant) and V m (maximum rate) were calculated 0.626 mM and... 

The novel idea of the Hydromagnetic Micropump and Flow Controller (HMFC) is used in this paper to construct a laboratory setup capable of bidirectional pumping and controlling the flow in microtubes. A laboratory setup, which contains no moving parts, is integrated with a pressure-driven flow setup to make the presented HMFC device. The device operation is based on controllable motion of magnetic particles, added to the carrier fluid, caused by the magnetic field, produced by solenoids located just next to the microtube. The magnitude of these forces is proportional to the strength and gradient of magnetic field which, in turn, is related to the electrical current and arrangement of the... 

A novel technique based on image processing inspired by the simple assumption for the first time to assess the roughness of nanofibrous mats based on grayscale variations is proposed. The height of a nanofibrous mat in different regions of the surface is simulated by grayscale variations in the image while the relation between grayscale and height is obtained as a linear function. The roughness is obtained by measuring height variations in the surface profile. Statistical roughness parameters of nanofibrous mats are also obtained from direct measurement with roughness profilometry and atomic force microscopy (AFM) for comparison of the roughness of nanofibrous mats between direct measurement... 

The effects of applied magnetic and electric fields on electrospinning were investigated to produce more efficient nanofibers. Considering the previous extensive studies, polyamide nanofibers were prepared by a conventional approach and under auxiliary electric and magnetic fields. The first sorbent was synthesized by electrospinning of a solution of 18% polyamide in formic acid. The second and third types of polyamide were prepared similarly while the electrospinning processes were assisted by an electric and a magnetic field. The third type of polyamide contained a magnetic ionic liquid (MIL) to induce sufficient magnetic susceptibility in the polymeric solution. The SEM images revealed... 

An on-line extraction/determination set up was designed for micro solid-phase extraction of clodinafop propargyl from water, soil and wheat samples using electrospun polyamide nanofiber mats. The prepared mats were packed in a stainless steel tube which conveniently acted as a high-performance liquid chromatography injection loop. Influential parameters affecting the extraction efficiency were optimized using a distilled water sample fortified with 25 μg L-1 of clodinafop propargyl. An enrichment factor of 440 was achieved for clodinafop propargyl indicating the ability of the whole procedure. Under the optimum conditions, the linearity for the analyte was in the range of 6-700 μg L-1, while... 

The present work deals with a novel approach for grafting a sol-gel based sorbent, using diazonium salts for preparation of an unbreakable capillary microextraction (CME) device in on-line combination with high performance liquid chromatography (HPLC). The use of diazonium salts modifier allowed all types of metallic and non-metallic substrates to be used without any limitation. Substrates including copper, brass, stainless steel and polytetrafluoroethylene (PTFE) were chosen to be functionalized by chemical or electrochemical reduction of 4-amino phenyl acetic acid. Then, 3-(trimethoxysilyl)propylamine (3TMSPA) was selected as the precursor and the only reagent for preparation of the... 

To evaluate the selectivity and efficiency of solid phase microextraction (SPME) fiber coatings, synthesized by sol-gel technology, roles of precursors and coating polymers were extensively investigated. An on-line combination of capillary microextraction (CME) technique and high performance liquid chromatography (HPLC) was set up to perform the investigation. Ten different fiber coatings were synthesized in which five of them contained only the precursor and the rests were prepared using both the precursor and coating polymer. All the coatings were chemically bonded to the inner surface of copper tubes, intended to be used as the CME device and already functionalized by self-assembly... 

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption... 

Solid-phase microextraction (SPME) is a fast, solvent-free technique, which, since its introduction in the 1990s, has been increasingly applied to sample preparation in analytical chemistry. Conventional SPME fibers are fabricated by making a physical bond between the usual silica substrate and the polymeric coatings. However, some applications are limited, as the lifetime and the stability of conventional SPME fibers cannot meet the demands of analyzing relatively non-volatile compounds with more polar moieties. There have been attempts to analyze less volatile compounds by increasing the thermal, physical and chemical stability of the fibers. In this review, we present some new... 

Research projects in urban transportation systems require proper simulation softwares. Such softwares are the basic requirements of any kind of study in electrical transportation systems. Due to high energy consumption of these systems, studies for its optimization are challenging and necessary. In this paper an optimized timetable of trains? movement is proposed in order to completely utilize the regenerative energy of trains? braking in stations. A sample subway system is simulated and Genetic algorithm is used as an optimization method. The effect of headway and reserve times on the amount of energy consumption is studied and an optimized reserve time set is found for the sample system.... 

In this study, organic aerogels were synthesized by the sol-gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol-gel-based micro-solid-phase extraction sorbent, resorcinol-formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop-propargyl, haloxyfop-etotyl, and fenoxaprop-P-ethyl, were extracted from aqueous samples by micro-solid-phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the... 

Background: Current development of sequencing technologies is towards generating longer and noisier reads. Evidently, accurate alignment of these reads play an important role in any downstream analysis. Similarly, reducing the overall cost of sequencing is related to the time consumption of the aligner. The tradeoff between accuracy and speed is the main challenge in designing long read aligners. Results: We propose Meta-aligner which aligns long and very long reads to the reference genome very efficiently and accurately. Meta-aligner incorporates available short/long aligners as subcomponents and uses statistics from the reference genome to increase the performance. Meta-aligner estimates... 

Correct scheduling of the project is the necessary condition for the project success. In traditional models, the activities duration times are deterministic and known. In real world however, accurate calculation of time for performing each activity is not possible and is always faced with uncertainty. In this paper, the duration of each activity is estimated by the experts as linguistic variables and the said variables are represented in fuzzy numbers form using the fuzzy theory. Estimating the project accomplishment duration and determining the project critical path will be possible through resolving a fuzzy linear programming model. For solving model, Fuzzy Critical Path Method Algorithm...