Sharif Digital Repository

In this study, a simple and novel control technique for Power Factor Correction (PFC) is introduced, which is a SEPIC-based (Single-ended Primary-inductor Converter based) rectifier with high input power factor. Operation of the proposed method is based on sampling of input and output voltages in SEPIC rectifier. Using samples of input and output voltage, this control system makes the input current to follow a sinusoidal path. As a result, the line current?'s Total Harmonic Distortion (THD) is reduced and the input power factor is improved. This paper also compares the new method with the conventional control method for the power factor correction. In order to examine the proposed control... 

In this study, leaching of reverberatory furnace dust at Sarcheshmeh was investigated in H2SO4-O3 medium. Response surface methodology based on central composite face-centered design (RSM-CCF) was applied to optimize the operating parameters. The optimal conditions to achieve the principle objectives of maximizing copper dissolution and minimizing iron dissolution from dust were identified to be a temperature of 30 °C, a leaching time of 3 h, an initial pH of 0.5, a pulp density of 20%, and an ozone flow rate of 1 g/h. Under the optimum conditions, the copper and iron concentrations in the leaching solution were found to be 27.11 and 0.90 g/L, respectively. The results showed that selective... 

The heat recovery steam generator (HRSG) is one of the few equipments that are custom made for combined cycle power plants, and any change in its design affects all performance parameters of a steam cycle directly. Thus providing an optimization tool to optimize its design parameters and the layout of its heat exchangers is of great importance. A new method is introduced for modeling a steam cycle in advanced combined cycles by organizing non-linear equations and their simultaneous solutions by use of the hybrid Newton methods in this article. Thereafter, optimal thermodynamic performance conditions for HRSGs are calculated with the help of the genetic algorithm. In the conclusion, the... 

A batch extraction of an essential amino acid, phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin, and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as the initial pH of the aqueous external phase, the electrolyte concentration in the aqueous internal phase, carrier, and surfactant concentration in the emulsion, the volume ratio of the organic to aqueous internal phase (Roi), the volume ratio of the W/O emulsion to the aqueous external phase (Rew) and time were examined and optimized using the Taguchi... 

Electric networks often consist of remote cities or villages with low population densities, which consume a considerably small amount of energy. This can be in the order of a few megawatts for places that are up to 100 km away from the source. Typical uncompensated primary distribution lines are not an effective option for these situations, since line loadability drastically decreases as the line length is increased. Increasing the voltage level, on the other hand, is not cost effective. This paper investigates different reactive compensation techniques for increasing the loadability of these lines. Effect of series capacitors, shunt capacitors and voltage regulating transformers in such... 

In this paper we proposed a novel inverter to convert a DC voltage to a desired AC voltage. This inverter is designed for variable inductive loads and low output power applications. We proposed a novel simple PWM method which enables the inverter to keep the output current at six times more than the rated output current, without reducing output voltage value. In addition, based on a simple use of resonance in the circuit, the new inverter can raise the output voltage to extremely high amplitude for a relatively short time. These characteristics make the proposed inverter is useful for some industrial applications such as electrical vehicle. The new configuration of the circuit consists of a... 

Stent placement has been a main approach to treat gastrointestinal diseases during past decade. Nitinol superelastic stents have been considered as a solution to such difficulties as restenosis after implantation, low twisting ability, inadequate radial mechanical strength and inappropriate dynamic behaviors associated with the ducts. In this paper, effects of Af temperatures on mechanical performance of z-shaped Nitinol wire stent under crimping test for clinical applications are investigated by finite element simulation. Having 60% crimping and high radial resistive strength, favorable superelastic behaviors are attained at Af temperature of 22°C. The performance of the stent is seen to be... 

In vivo dose-dependent effects of nanoscale graphene oxide (NGO) sheets on reproduction capability of Balb/C mice were investigated. Biodistribution study of the NGO sheets (intravenously injected into male mice at dose of ∼2000 μg/mL or 4 mg/kg of body weight) showed a high graphene uptake in testis. Hence, in vivo effects of the NGO sheets on important characteristics of spermatozoa (including their viability, morphology, kinetics, DNA damage and chromosomal aberration) were evaluated. Significant in vivo effects was found at the injected concentrations ≥200 μg/mL after (e.g., ∼45% reduction in sperm viability and motility at 2000 μg/mL). Observation of remarkable DNA fragmentations and... 

Asian red ginseng was used for green reduction of chemically exfoliated graphene oxide (GO) into reduced graphene oxide (rGO). The reduction level and electrical conductivity of the ginseng-rGO sheets were comparable to those of hydrazine-rGO ones. Reduction by ginseng resulted in repairing the sp 2 graphitic structure of the rGO, while hydrazine-rGO showed more defects and/or smaller aromatic domains. The ginseng-rGO sheets presented a better stability against aggregation than the hydrazine-rGO ones in an aqueous suspension. Whilst the hydrophobic hydrazine-rGO films exhibited no toxicity against human neural stem cells (hNSCs), the hydrophilic GO and ginseng-rGO films (as more... 

Vigorous debates have taken place within and between many countries about regulatory policy regimes covering the assessment and approval of genetically modified (GM) crops. In Iran, a very vigorous and hotly contested policy debate concerning legislation covering GM crops occurred between 2004 and 2009, but it was confined within government circles with almost no public discussion. This paper analyses the Iranian policy-making process in the period 2006-9. It explains how and why a stalemate arose in disputes between ministries and departments. The chosen analytical framework draws mainly on the regulation of technological risks and the analysis of public policy-making. It deploys the... 

A μ-way latin trade of volume s is a set of μ partial latin rectangles (of inconsequential size) containing exactly the same s filled cells, such that if cell (i, j) is filled, it contains a different entry in each of the μ partial latin rectangles, and such that row i in each of the μ partial latin rectangles contains, set-wise, the same symbols and column j, likewise. In this paper we show that all μ-way latin trades with sufficiently large volumes exist, and state some theorems on the non-existence of μ-way latin trades of certain volumes. We also find the set of possible volumes (that is, the volume spectrum) of μ-way latin trades for μ = 4 and 5. (The case μ = 2 was dealt with by Fu,... 

The set of integers k for which there exist three latin squares of order n having precisely k cells identical, with their remaining n2 -k cells different in all three latin squares, denoted by I3[n], is determined here for all orders n. In particular, it is shown that I3[n] = {0,.,n2 -15}U [n2 - 12,n2-9,n2], for n ≫8. ©2002 Eisevier Science B.V. All rights reserved  

Coronary angiography is a vital instrument to detect the prevailing of vascular diseases, and accurate vascular segmentation acts a crucial role for proper quantitative analysis of the vascular tree morphological features. Level set methods are popular for segmenting the coronary arteries, but their performance is related to suitable start-up and optimum setting of regulating parameters, essentially done manually. This research presents a novel fuzzy level set procedure with the objective of segmentation of the coronary artery tree in 2-D X-ray angiography as automatically. It is clever to clearly develop from the early segmentation with spatial fuzzy grouping. The adjusting parameters of... 

Visual attributes are great means of describing images or scenes, in a way both humans and computers understand. In order to establish a correspondence between images and to be able to compare the strength of each property between images, relative attributes were introduced. However, since their introduction, hand-crafted and engineered features were used to learn increasingly complex models for the problem of relative attributes. This limits the applicability of those methods for more realistic cases. We introduce a deep neural network architecture for the task of relative attribute prediction. A convolutional neural network (ConvNet) is adopted to learn the features by including an... 

We present the first public code for the calculation of the astrometric centroid shift occurring during microlensing events. The computation is based on the contour integration scheme and covers single and binary lensing of finite sources with arbitrary limb darkening profiles. This allows for general detailed investigations of the impact of finite source size in astrometric binary microlensing. The new code is embedded in version 3.0 of vbbinarylensing, which offers a powerful computational tool for extensive studies of microlensing data from current surveys and future space missions. © 2021 The Author(s) Published by Oxford University Press on behalf of Royal Astronomical Society  

The possibility of real-time tuning of optical devices has attracted a lot of interest over the last decade. At the same time, coming up with simple lithography-free structures has always been a challenge in the design of large-area compatible devices. In this work, we present the concept and the sample design of an electrically tunable, lithography-free, ultra-thin transmission-mode color filter, the spectrum of which continuously covers the whole visible region. A simple Metal-Insulator-Metal (MIM) cavity configuration is used. It is shown that using the electro-optic dielectric material of 4-dimethyl-amino-N-methyl-4-stilbazoliumtosylate (DAST) as the dielectric layer in this... 

Magnetic flux leakage is the most widely used method for oil and gas pipeline non destructive testing. The saturation level of the sample under test has a significant effect on its efficiency; therefore, the magnetizing yoke requires an elaborate design. The finite element method is the conventional approach used for this purpose, but it is very time consuming. In this article, a neuro-fuzzy method is presented to model the behavior of the magnetizing yoke. Modeling a few different designs with the finite element method and using the results for training the neuro-fuzzy model eradicates the necessity of modeling a huge number of designs with the finite element method. The acquired...