Sharif Digital Repository

In this study, leaching of reverberatory furnace dust at Sarcheshmeh was investigated in H2SO4-O3 medium. Response surface methodology based on central composite face-centered design (RSM-CCF) was applied to optimize the operating parameters. The optimal conditions to achieve the principle objectives of maximizing copper dissolution and minimizing iron dissolution from dust were identified to be a temperature of 30 °C, a leaching time of 3 h, an initial pH of 0.5, a pulp density of 20%, and an ozone flow rate of 1 g/h. Under the optimum conditions, the copper and iron concentrations in the leaching solution were found to be 27.11 and 0.90 g/L, respectively. The results showed that selective... 

The heat recovery steam generator (HRSG) is one of the few equipments that are custom made for combined cycle power plants, and any change in its design affects all performance parameters of a steam cycle directly. Thus providing an optimization tool to optimize its design parameters and the layout of its heat exchangers is of great importance. A new method is introduced for modeling a steam cycle in advanced combined cycles by organizing non-linear equations and their simultaneous solutions by use of the hybrid Newton methods in this article. Thereafter, optimal thermodynamic performance conditions for HRSGs are calculated with the help of the genetic algorithm. In the conclusion, the... 

A batch extraction of an essential amino acid, phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin, and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as the initial pH of the aqueous external phase, the electrolyte concentration in the aqueous internal phase, carrier, and surfactant concentration in the emulsion, the volume ratio of the organic to aqueous internal phase (Roi), the volume ratio of the W/O emulsion to the aqueous external phase (Rew) and time were examined and optimized using the Taguchi... 

Electric networks often consist of remote cities or villages with low population densities, which consume a considerably small amount of energy. This can be in the order of a few megawatts for places that are up to 100 km away from the source. Typical uncompensated primary distribution lines are not an effective option for these situations, since line loadability drastically decreases as the line length is increased. Increasing the voltage level, on the other hand, is not cost effective. This paper investigates different reactive compensation techniques for increasing the loadability of these lines. Effect of series capacitors, shunt capacitors and voltage regulating transformers in such... 

In this paper we proposed a novel inverter to convert a DC voltage to a desired AC voltage. This inverter is designed for variable inductive loads and low output power applications. We proposed a novel simple PWM method which enables the inverter to keep the output current at six times more than the rated output current, without reducing output voltage value. In addition, based on a simple use of resonance in the circuit, the new inverter can raise the output voltage to extremely high amplitude for a relatively short time. These characteristics make the proposed inverter is useful for some industrial applications such as electrical vehicle. The new configuration of the circuit consists of a... 

Stent placement has been a main approach to treat gastrointestinal diseases during past decade. Nitinol superelastic stents have been considered as a solution to such difficulties as restenosis after implantation, low twisting ability, inadequate radial mechanical strength and inappropriate dynamic behaviors associated with the ducts. In this paper, effects of Af temperatures on mechanical performance of z-shaped Nitinol wire stent under crimping test for clinical applications are investigated by finite element simulation. Having 60% crimping and high radial resistive strength, favorable superelastic behaviors are attained at Af temperature of 22°C. The performance of the stent is seen to be... 

In this study, a simple and novel control technique for Power Factor Correction (PFC) is introduced, which is a SEPIC-based (Single-ended Primary-inductor Converter based) rectifier with high input power factor. Operation of the proposed method is based on sampling of input and output voltages in SEPIC rectifier. Using samples of input and output voltage, this control system makes the input current to follow a sinusoidal path. As a result, the line current?'s Total Harmonic Distortion (THD) is reduced and the input power factor is improved. This paper also compares the new method with the conventional control method for the power factor correction. In order to examine the proposed control... 

Nowadays, manufacturing enterprises have been faced with a globalized competitive environment. In this fierce condition, Cloud Manufacturing paradigm emerged as a promising concept for competition. It provides effective solutions and tools for manufacturing enterprises to collaborate in globalized market. The revolution that Cloud Manufacturing has created is based on the redefinition of the classic methods to those which are appropriate for todays' modern and globalized manufacturing environments. In parallel with cloud-based revolution, the expansion of internet-based technologies has been started. These technologies previously have been applied in many fields and resulted in...