Sharif Digital Repository

ZnO nanostructures in the shape of particle, rods, flower-like and micro-sphere were synthesized via facile hydrothermal methods and the effect of morphology on the decolorization of CI Acid Red 27 solution under direct irradiation of sunlight was investigated. XRD patterns showed that the synthesized nanostructures have Wurtzite-type hexagonal structure with high crystallinity and crystallite size in the range of 67-100 nm. UV-vis absorption spectra indicated that the ZnO nanorods have higher visible light harvesting as compared to the other morphologies. The decolorization obeys the first order kinetics rate with the kinetics constant of 4.5-19.5 × 10-3 min-1 dependent on the ZnO... 

Spin lattice relaxation rate is investigated for 3D tilted cone Weyl semimetals (TCWSMs). The nuclear spin relaxation rate is presented as a function of temperature and tilt parameter. We find that the relaxation rate behaves as (1-ζ2)-α with α ≈ 9 where 0 ζ < 1 is the tilt parameter. We demonstrate that such a strong enhancement for ζ ≲ 1 that gives rise to very fast relaxation rates, is contributed by a new hyperfine interactions arising from the tilt itself. This can be attributed to the combination of anisotropy of the Fermi surface and an additional part related to the structure of the spacetime: extracting an effective density of states (DOS) ρ from the Korringa relation, we show that... 

The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion. The results showed dominance of mode I fracture on crack growth, and based on the observation of strain energy density factor versus crack orientation, the results also suggest that depending on the crack length, the most critical orientations of cracks are at 0° to 20° outward the contact zone. Good... 

In this paper, the effect of geometrical parameters on the fretting fatigue of a half-plane in contact with a flat and rounded pad is studied. This is accomplished by calculating and comparing the stress states and stress intensity factors of fretting cracks for a number of pad geometries. The pad geometry is represented by the radius of its rounded corners and the width of its central flat part. The distribution of dislocation method is employed to calculate the stress intensity factors of fretting induced cracks of different lengths for different values of geometrical parameters. The results of this study can be insightful for improving the geometrical design of an aero-engine compressor... 

Three-dimensional (3D) bundles of self-assembled lanthanum hydroxide nanorods with average crystallite size of about 20 nm were fabricated via a facile and rapid microwave-assisted chemical route. The obtained material was characterized with X-ray diffractometry (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. The obtained nanorods have average diameter of about 115 nm and average length of about 730 nm. Self-assembly of primary La(OH)3 nanoparticles and their subsequent anisotropic growth along 〈2 0 0〉 direction, was proposed to be the mechanism for the formation of 3D bundles of nanorods, using TEM images. The thermal behavior of the... 

Rosette-like boehmite nanostructures were prepared successfully via a simple hydrothermal process. The obtained material was characterized with X-ray powder diffractometry (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Using Scherrer formula, the average crystallite size of the obtained boehmite rosettes was measured to be about 8 nm. It was shown that boehmite nanopetals with average width of about 41 nm determined by TEM, were formed during the hydrothermal process and then self assembled due to weak hydrogen bonds to fabricate boehmite rosettes. The specific surface area of the obtained rosette-like nanostructures was calculated through BET... 

A method is described for the simultaneous generation of two or more wavelengths from a dye laser pumped by a copper vapor laser (CVL). The dye laser cavity consists of one dye cell, two pairs of gratings and tuning mirrors, and one beam-splitting Thompson prism and an output mirror. This configuration allows decomposition of the dye laser beams into two grazing incidence cavities. These two emissions can have the same or different linewidth. The two collinear output beams are independently tunable over the entire gain profile of the dye, with mutually orthogonal polarizations. The gain competition effect is observed to be low  

Self-assembled dandelion-like hydroxyapatite (HAp) nanostructures were successfully synthesized via a mild template-free hydrothermal process, using ethylenediaminetetraacetic acid (EDTA) as the surfactant. The obtained dandelion-like HAp nanostructures were between 5 and 8 μm in diameter and were composed of radially oriented nanorods with an average diameter of about 200 nm. The X-ray diffraction analysis and Fourier transform infrared spectroscopy were used to characterize the crystalline phase and purity of the synthesized nanostructures. The Brunauer-Emmett-Teller surface area of the dandelion-like nanostructures was measured to be about 39 m2/g. The results of thermal analysis revealed... 

Efficient sunlight harvesting is of great significance for environmental remediation through photocatalysis. Herein, very small (20 nm) upconverter SrF2:Yb,Tm@CaF2:Yb@Fluorine-doped TiO2heteronanoparticles (denoted as UCNPs@TiO2) with strong UV-blue emission and broadband photocatalytic performance were prepared via a facile three-step hydrothermal method for the first time. The SrF2:Yb,Tm upconverter nanoparticles (NPs) were produced as the light-emitting core, epitaxially grown CaF2:Yb as the middle shell to enhance the upconversion luminescence output and TiO2as the photocatalyst outermost layer. Superior photocatalytic functioning of UCNPs@TiO2was affirmed through methylene blue (MB)... 

To improve our understanding of the chemistry of actinide complexes and to spur their development in the field of actinide markers, two new uranium complexes were synthesized using 8-hydroxyquinoline and 5,7-dichloro-8-hydroxyquinoline. The prepared complexes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, ultraviolet− visible spectroscopy, elemental analysis, and single-crystal X-ray diffraction. The impact of the electron-withdrawing group of the ligand on the photoluminescence spectra of the complexes in solution and in the solid state was scrutinized. The bandgap of the complexes was calculated using the density functional theory (DFT) method to... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for...