Sharif Digital Repository

Using the Yang-Shih low Reynolds k-ε turbulence model, the mean flow field of a turbulent offset jet issuing from a long circular pipe was numerically investigated. The experimental results were used to verify the numerical results such as decay rate of streamwise velocity, locus of maximum streamwise velocity, jet half width in the wall normal and lateral directions, and jet velocity profiles. The present study focused attention on the influence of nozzle geometry on the evolution of a 3D incompressible turbulent offset jet. Circular, square-shaped, and rectangular nozzles were considered here. A comparison between the mean flow characteristics of offset jets issuing from circular and... 

Aluminum 6xxx and 7xxx series are among the most commonly used alloys in industrial applications whereas their joining and welding using conventional fusion-based weld processes are very difficult. In this paper, friction stir welding process of dissimilar AA6061-T6 and AA-7277-T6 aluminum plates was investigated. The effects of tool travers and rotational speeds and the type of material located in the advanced side (AS) or retreating side (RS) of weldment were studied experimentally on the mechanical and metallurgical characteristics of the joint. Macro- and microstructure pictures of weld region were used to evaluate the quality of the weld and defect detections. Tensile strength tests and... 

This paper investigates the effects of the first non-singular stress terms on the fracture assessment of sharp V-notches under mixed mode loading. First, numerical studies have been performed on a fracture test configuration called single V-notched ring (SVR) specimen. Then, the notch stress intensity factors as well as the coefficients of the first non-singular stress terms, which are vital parameters in brittle fracture of V-notched components, were calculated via a finite element over-deterministic algorithm for a wide range of loading and geometry conditions. The obtained results demonstrate that the SVR specimen is able to provide a complete range of mode mixities from pure mode I to... 

Background: Gestational Diabetes Mellitus (GDM) is a health problem that is increasing around the world. Introduction: Prevention of GDM, rather than treatment, could have several benefits in terms of both health and economic cost. Even a slight reduction in maternal glucose in non-diabetic women, particularly in women at high risk for GDM, may have significant benefits for pregnancy results and the future health of off-springs. Probiotics are a relatively new intervention, which are assessed by mothers’ metabolism, and can reduce blood sugar levels, prevent gestational diabetes and reduce the maternal and fetal complications resulting from it. The aim of this study was to review the studies... 

In this study chitosan hydrogel beads with porosity ∼ 0.86 and diameter ∼ 2 ± 0.07 mm were prepared from 85 % deacetylated chitosan for removal of Cd2+ ions from aqueous solutions. Chitosan powder was dissolved into dilute acetic acid as solvent and formed into spherical beads using a phase inversion technique. The effect of temperature, initial concentration of Cd2+ ions, and the period of agitation were perused to achieve the best isotherm model. Freundlich model was better fitted than Langmuir model (R2 > 0.99 and R2> 0.93 respectively, at pH of 6.3, and shaker speed of 200 rpm), the constants of Langmuir and Freundlich models were calculated, which RL value and qmax (mg/g wet weight) at... 

This study demonstrates a new kind of photocatalytic system via utilization of the superior specific properties inherent in Pickering emulsion. We designed the new photocatalytic system using a novel p–n heterojunction Ag3PO4/BiPO4 (AB) as a photocatalytic active component, multiwalled carbon nanotubes (MWCNTs) and graphene (GR) as a hydrophobic conducting nanostructure to form the stabilized Pickering emulsion. The photocatalytic activity of the as-prepared stabilized Pickering emulsion-based system (Pe-bp system) was studied by monitoring the change in Acid Blue 92 dye (AB92) concentration under both visible and UV light irradiation. The results revealed that the Pe-bp system exhibits a... 

ZnO and Mordenite zeolite (MOR) nanoparticles were prepared by precipitation process using ultrasonic irradiation and hydrothermal method, respectively. Supported ZnO catalysts were prepared and the effect of different supports on the photocatalytic activity of ZnO nanoparticles was investigated. All prepared samples were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform-Infra Red Spectroscopy (FTIR), UV–vis spectroscopy (UV–vis) and BET surface area technique. The photocatalytic activity of the synthesized catalysts was elucidated using the photo-oxidation of Acid Blue 92 (AB92) as a hazardous pollutant under UV light. The effect of different... 

For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and... 

Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...