Sharif Digital Repository

Hybrid engines are one of a variety of chemical propulsion systems that have been given special attention in recent years by various industries such as space and defense. The most important reasons for considering this type of system are its high safety, its affordable price compared with liquid fuel propulsion systems, the possibility of switching on and off and changing thrust. This system has a lot of disadvantages as well. This system cannot meet all the needs of different industries due to the low regression rate and, consequently, the limitation of the operating range, thrusts and special impulse. As a result, increasing the fuel regression rate in these engines can greatly expand... 

Hydrocarbon reservoirs may be classified on the basis of their drive mechanisms. In the reservoirs adjoined by water aquifers, waterdrive may be the primary production mechanism. The invasion of reservoir rock by aquifer water may have a significant impact on reservoir performance. Therefore, water influx into hydrocarbon reservoirs must be predicted accurately as a function of time, pressure history at the reservoir/aquifer interface, reservoir/aquifer size ratio, and aquifer characteristics.To forecast the performance in a waterdrive reservoir, an aquifer model simulating the fluid flow in the aquifer and flow from the aquifer into the reservoir is needed. Robust techniques for analysis of... 

The success of matrix acid production operations and its proper efficiency is one of the main challenges for oil and gas companies. The heterogeneity of the reservoir formation (especially the permeability difference) in the area around the well due to the presence of different reservoir layers results in the non-uniform distribution of acid among them and adds acidizing challenges. In order to improve production conditions, stimulation fluid transfer to the low permeability layer, which is the main target of acidizing. In this study, a new generation of chemical diverter, called Viscoelastic Surfactant, has been used. These materials have two components of elastic and viscous behavior, and... 

Low salinity/smart waterflooding is simple to apply and a promising enhanced oil recovery method in which ion-tuned saltwater is injected into subsurface oil reservoirs. Many aspects of this operation, in particular those pertaining to nano-scale, are not yet fully understood. The present dissertation is an attempt to shed light on the microscopic properties and behavior of rock/brine/oil interfaces throughout low salinity/smart waterflooding. Several simulations were carried out for oil/brine and calcite/brine categories each containing various ions and hydrocarbons compounds. The surface contribution of non-functional oil compounds (aromatics and aliphatics) near brine medium was... 

In this research, we studied the effect of compatibilizer and short glass fiber on microstructure and mechanical properties of PBT/PC blends. Fisrt, Antioxidants and sodium pyrophosphate dibasic were used to suppress transesterification in PBT/PC Blend. The results showed that best composition occur when both of them are used. In the next step, we used 3%wt MBS (methyl methacrylate-butadiene-styrene) and saw that this weight percent of this compatibilizer doesn’t useful. Moreover addition of short glass fiber to PBT/PC was examined and the results showed that mechanical properties of composite are extensively increased. Also in this step, we proved this idea that we can replace some of PBT... 

Interfacial Tension (IFT) as a main parameter for gas flooding efficiency in oil reservoirs depends highly on pressure, temperature, and composition of the reservoir fluids. Therefore, it is important to measure this parameter at real reservoir condition for successful field development plan. In this study, an axisymmetric drop shape analysis (ADSA) has been utilized to measure the equilibrium IFTs in crude oil-CO2 as well as crude oil-N2 systems at different temperatures and pressures. Moreover, minimum miscibility pressures (MMP) and first-contact miscibility pressures (Pmax) of crude oil/CO2 and crude oil/N2 systems at different temperature levels are determined by applying vanishing... 

Today, due to limited number of light oil reservoirs, enhanced recovery from heavy oil reservoirs is taken into consideration. During the early production from heavy oil reservoirs, due to high viscosity, only a small amount (about 5%) of the oil can be produced; also after water injection operation due to unfavorable mobility ratio of water and oil, sorely more than about 10% of the original oil can be produced. On the other hand, fractured reservoirs represent about 20% of the world's oil reserves, while over 60% of the world's remaining oil reserves are in fractured reservoirs. Water flooding process leaves very high amounts of oil as remaining oil in these reservoirs too. One of the... 

The economic framework of the petroleum sector exhibits significant divergence from other businesses owing to the substantial risks and uncertainties inherent in oil and gas ventures, compounded by highly unpredictable price fluctuations. Moreover, the abundance of uncertainties in the data employed for investment decisions in petroleum projects is very large, thus exerting a significant impact on the decision-making processes. This research delves into the impact of diverse risk factors on oil contracts and scrutinizes their influence on contractual dynamics. The study unfolds in three segments, encompassing an examination of economic factors shaping oil contracts, model design, and the... 

As the published statistics of prestigious international institutes show, the share of natural gas from the energy basket of the world is rising. This increase is due to some reasons such as decrease in oil reserves, discovery of new gas fields, lower environmental problems, etc. The Islamic Republic of Iran is not an exception of this rule; but also because of huge gas reservoirs that Iran has, it becomes very important for the Iranian government. Hence, research for predicting the behavior of such reservoirs is a necessary need of oil and gas industry.Both thermodynamic and flow behavior of gas condensate fluids are more complicated than other reservoir fluids. Its complex thermodynamic... 

Part 1: Techniques of production data analysis for single-phase oil and gas reservoirs have advanced significantly over the past few years. These techniques range from traditional (Arps and Fetkovich) to modern (they account for the variation of operating conditions at the wellbore). Although the production data analysis methods are used generally for single phase reservoirs, the application of these techniques for analysis of production data of a gas condensate reservoir may not yield the reliable answer due to the fact that the flow of fluid in gas condensate reservoirs is not single-phase. This study presents the treatment of the modern methods of production data analysis (single phase... 

Due to the decrease in oil reserves in the world, increasing population and the growing demands for oil consumption in the world, increasing the oil recovery from oil reservoirs has become more important. Increasing the amount of oil production efficiency by using low salinity water/modified salinity water has been highly appreciated during the last two decades. Low-salt water is a new method, due to its advantages such as low cost, simplicity of operation and low environmental hazards. It is believed that low salinity water can alter the rock wettability from a more oil-wetting state to a more water-wetting state. In order to be able to predict the performance of low salinity water... 

Asphaltine particle precipitation may lead to serious problems in petroleum industry; including wellbore transmissibility reduction. One of the proposed remedial methods is to make a use of the microorganisms which are able to consume the heavy hydrocarbon chains.
Hydrophobicity of a cell surface is one of the parameters which greatly affect the microorganism adhesion to water insoluble hydrocarbons, in which results a higher hydrocarbon biodegradation. Consequently as the hydrophobicity of a cell surface increases; the microorganism tendency to bond with the hydrocarbon molecule enhances. The presence of a surface active agent, as an instance a chemical surfactant, will affect the... 

Fracture reservoirs are highly heterogeneous. This heterogeneity makes the process of adjusting model parameters to match both the static geological and dynamic production data challenging. For this reason, the characterization of the fracture network of these reservoirs, which is achieved by finding the appropriate probability distributions of the fracture properties in the discrete fracture network model, requires the use of an integrated workflow for the process of history-matching.This thesis, presents an integrated workflow for the process of history-matching of naturally fractured reservoirs with field-scale performance capability. In this methodology, first, multiple discrete fracture... 

Recent studies have shown that the injection of low-salinity water would enhance the oil recovery factor for both the core scale and the field test. The evidence obtained from laboratory studies showed that the control of salinity and the composition of injected water has successfully affected the oil release, hence enhancing the oil recovery efficiency. In this method, by changing the type and amount of dissolved ions in the injected water, the water/oil/rock interactions are altered. Based on this, extensive studies have been focused on the mechanisms for the trapped oil release at the pore scale. Several mechanisms have been proposed to explain this phenomenon, which can be divided... 

Microbial enhanced oil recovery (MEOR) is a collection of techniques that utilize microorganisms and their metabolic products to improve the recovery of crude oil from reservoir rock. From the advantages of this method, independency to the oil price and environmental benign can be mentioned. Many mechanisms have been proposed to contribute on MEOR, but still there is no enough knowledge about the mechanisms that causes inabilities in manipulating the process to get more oil production.
In the present study, the effect of a native type of bacteria, Enterobacter cloacae, on the glass surfaces wettability which were aged in expose of model oil with different asphaltene concentration was...