Sharif Digital Repository

The problem of restoring power systems after a complete or partial blackout is as old as the power industry itself. In recent years, due to economic competition and deregulation, power systems are operated closer and closer to their limits. At the same time, power systems have increased in size and complexity. Both factors increase the risk of major power outages. After a blackout, power needs to be restored as quickly and reliably as possible, and consequently, detailed restoration plants are necessary. This thesis concentrates on the initial stages of restoration where load pickup and frequency control problem is identified. The best sequence of load pickup for power plants during power... 

Silver is a resistant metal against the oxidation under normal atmospheric conditions, but it reacts readily with sulfur bearing species in the environment and corrodes. Alloying silver with more noble elements, such as Palladium, is a promising approach for increasing corrosion resistance against the sulfur pollutants. The purpose of this research is to develop a plating bath for deposition of Silver-Palladium alloy with acceptable appearance and higher corrosion resistance than pure silver. For this purpose, a bath based on thiosulfate complexing agent was investigated. In this solution, with a bath containing 10 mM of each cation, deposits with palladium content of 6, 11 and 14 % were... 

Natural disasters such as storms, earthquakes, floods, etc. are among the factors that can damage the elements of the power grid and cause them to leave the grid. The result of these outages will be a widespread power outage, which will create many economic and social problems. Therefore, in recent years, the concept of resiliencey has been introduced in power system studies, which examines the extensive outputs in the network as a result of natural disasters.One way to improve the power system resiliency is to strengthen the network by upgrading existing equipment, installing new equipment, and modifying the operation of the network. Among these, the installation of distributed generation... 

In this research, modal incremental dynamic analysis (MIDA) has been investigated on three-dimensional structures with irregular plans. The MIDA method is an incremental static analysis that considers higher modes of the structure. In fact, it is a combination of modal pushover (MPO) and incremental dynamic analysis (IDA) methods that incorporate the advantages of both and is much faster than the IDA method. Compared to constant analyses, incremental analysis is more extensive in terms of results and response to earthquakes. Due to the uncertainties in the nature of future earthquakes, engineers use the IDA method to achieve a broader view of the structure's response under potential... 

Air pollution caused by industrialization is the problem which adversely affects human life. Among air pollutants suspended particles, especially particles smaller than 10 microns (PM10), for their high concentration in air in large cities are the major index as air pollutant. Due to their small size, PM10 can penetrate into the aspiration organs causing harmful effects. The objective of this work is to develop an Artificial Neural Network (ANN) model for prediction of short-term concentration of PM10 in the city of Tehran. Complex mechanism of reactions, numerous types of pollutant materials produced from transportation and industrial activities, variety of sources, difficulties in data... 

The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a... 

The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections  

In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all... 

During the brewing process, beer alternately goes through different chemical and biochemical reactions and solid–liquid separation stages. The clarification at the final step of brewing is a highly critical stage when it comes to producing a clear and bright beer. Recently, membrane technology has been successfully used in beer clarification, wherein Kieselguhr (diatomaceous earth) filtration is replaced by cross-flow microfiltration. The most important disadvantages of using microfiltration in clarification of beer is the fouling and flux decline during the process. The phenomenology of fouling mechanisms is still undefined and selection of an appropriate technique for flux enhancement in... 

Different methods can be used to produce reduction gas. One example is using coal. But today there’s a tendency to use natural gas. One way of transforming natural gas to reduction gas is to burn it with gases produced by combustion, such as or vapor; usually a catalyst is used in this method. Another method is burning natural gas directly with oxygen or air. The recent method is of benefit especially in Iran, because of available natural gas resources and avoiding catalyst problems. Designing a burner for this purpose is an important step in reaching this goal. In this project such a burner is designed and manufactured. The burner manufactured in this project burns natural gas with... 

Nowadays, with population growth and vehicle traffic increase, only providing transportation supply couldn’t answer the transportation demand. One of the most important solutions to reduce traffic is transportation demand management (TDM). In this research, the effects of parking pricing and improving public transportation services on private car demand reduction in city center are examined. The data are collected from private cars users in the city center of Isfahan through interviews. By stated preference method, the impacts of parking price and public transit travel time and other related factors were investigated. For this purpose, binary logit, multinomial logit and nested logit models... 

In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

Industrialization has brought about air pollution which is one of the most important factors threatening human health. The most efficient method to improve air quality include preventing the emission of pollutants by making laws and regulations. In order to set appropriate regulations, there needs to be a correct understanding of the problem. The purpose of this research is to identify such factors and create a correct understnding of the problem in Iran by constructing a Model of Iranian air qulity. The model used in this research, CMAQ is one of the most comprehensive and state of the art models in transport of pollutnts and chemical reactions in the atmosphere. The inputs into CMAQ...