Sharif Digital Repository

The electric field induced response of a charged droplet in an uncharged gel is calculated theoretically. For modeling, the gel is considered as a soft porous solid that is saturated with a Newtonian electrolyte and modeled as a continuum that contains 3 phases: a porous, soft and compressible solid, an incompressible Newtonian fluid and the ions inside fluid. Droplet is modeled as a charged incompressible Newtonian fluid immiscible with the gel. The droplet-gel interface is considered as a surface with electrostatic potential ζ . After obtaining governing equations, they solved by using perturbation methodology and linear superposition. Boundary conditions, especially at the droplet-gel... 

Nanoparticles can be applied as chemical agent in enhnaced oil recovery like surfactants and polymers. One of nanoparticles usefull capabilities is modification of their surface. This research investigates this capabilty of nanoparticles in enhanced oil recovery. Surface modification of nanoparticles with both agents can bring new abilities to these materials. Here surface of silica nanoparticles is modified by hydrophilic agent comprising PEG groups, hydrophobic agent comprising propyl group and both agents. FT-IR tests showed that grafting of modifiyng agents on surface of nanoparticles is well done. To investigate effect of nanoparticles surface modification on nanoparticles capability in... 

Important features of the nanoparticles properties are their high superficial area and being able to reform their surface. In this study, the repairable property used to reform surface of silica nanoparticles (Those are used more frequently than other nanoparticles). Repairing of surface are doing to use nanoparticles as a surface-active material in enhanced oil recovery. Silane compounds with different chain length are used to create hydrophobic nanoparticles and PEG compounds are used to create hydrophilic nanoparticles. Also amphiphilic nanoparticles are created with a combination of both hydrophilic and hydrophobic compounds. To investigate the usefulness of nanofluids are made up of the... 

The main purposes of this project are simulation, design, and fabrication of a microfluidic system based on dielectrophoresis (DEP) exploiting AC voltages for separation of microparticles. Generally, this project can be divided into two parts. First, the engineering section including design and fabrication of microchip, and second biological samples preparation for investigating the system performance. The main advantages of proposed system are eliminating joule heating, a significant problem in insulating based dielectrophoresis systems, overcoming problems related to metal contamination in biological samples, the main problem of conventional dielectrophoresis platforms, and removing... 

The main goals of this research are design, simulation, and fabrication of a microfluidic system working based on dielectrophoresis. This research divided into two different parts, the first of which is the simulation of a microfluidic system, and second of which is an attempt for fabrication of microfluidic system. For the fabrication of the microfluidic system, different methods were used. In the simulation part, the enrichment of different particles was investigated, and the effects of different parameters on the enrichment were assessed. It was observed that as flow rate increases, the enrichment amount diminishes. Furthermore, as the microfluidic depth decreases, the enrichment amount... 

Surface modification is an important property of nano particles. In this project surface of silica nano particles modified with hydrophobic and hydrophilic groups to imrprove surface activity of nano particles. Purpose of this project is to study surface activity of surface modified silica nano particles in different temperatures from 20 to 70 degree centigrade. Also effect of salt and time on the surface activity is studied. At first nano particles modified just with haydrophobic groups and then just with hydrophilic groups (hydrophobic and hydrophilic nano particles) and after that, the surface modification done with both hyadrophilic and hydrophobic groups (amphiphilic nanoparticles).... 

In recent years, desulfurization has received much attention due to its devastating environmental effects. The existence of sulfur compounds has effects such as corrosion, poisoning of catalysts, reduction of heat of combustion and reduction of price. Sulfur compounds in hydrocarbon fuels also produce sulfur oxides caused by combustion then they enter the atmosphere, and cause acid rain. Acid rain dissolves building materials, poisons lakes, and destroys forests. Therefore, removing sulfur or converting it to less harmful substances is one of the most important processes in refineries. The method studied in this research is the use of adsorption desulfurization method by microchannel which... 

The present paper is an attempt to critically measure interfacial tension with microchannels and achieve the quantity of adsorption in the liquid – liquid interfaces and comparing the adsorption of surfactants and nanoparticles surface modificated as well. At this point we need to make emulsion and it is necessary for droplets to be monodispersed due to analyze these droplets in this paper. According to this condition for our droplets microsystems are the best options. As we know surfactants were already known as a stabilizing emulsion agent and in this paper nanoparticles are suggested as suitable alternatives for surfactants which can be absorbed as if they are in the water / oil... 

Emulsions are the intermittent dispersion of liquid droplets that have many applications such as polymerization, dyeing, cosmetics, food industry, etc. Droplets can be created in a variety of ways, but the most important point in emulsification and the greatest efficiency of its applications is when the formed droplets are uniform. In the emulsification process, there is a key parameter called interfacial tension, which affects the behavior of the formed droplets, such as their stability and morphology, and its precise measurement is very effective in the quality control of the mentioned applications. Be. In this research, droplet formation in microfluidic systems due to uniform droplet... 

Conical nanochannels have desirable electrokinetic properties due to asymmetry,including ionic current rectification and ion selectivity. The present study numerically addressed the effect of slip length on the ionic current rectification and ion selectivity in conical-shaped electrolyte-loaded nanochannels with and without a coated polyelectrolyte layer. The electrolyte was considered a salted incompressible Newtonian fluid. The polyelectrolyte layer was also modeled as a rigid and charged porous solid saturated with a salted Newtonian fluid. The electrolyte-polyelectrolyte layer interface was modeled as a surface, considering ion partitioning with distinct physical properties across the... 

In this study, the performance of electrocoalescence in a microfluidic device was investigated through numerical simulations. The microfluidic device consisted of two immiscible fluids, a continuous phase, and a dispersed phase, which were modeled as incompressible Newtonian fluids. The interface between the two phases was tracked using a phase-field model. A flow-focusing geometry was employed to crate water droplets in oil. The dispersed droplets were then pass over a set of electrodes. The merging of two adjacent droplets in the microfluidic device was observed by applying a constant electric field. The voltage of 60 V is the lowest voltage at which the regular merging of pairs of drops... 

The produced crude oil from the petroleum reservoirs usually has a value of brine (water and salt) this matter can be caused the corrosion of refinery equipment. The large part of this brine creates a stable emulsion with oil, that it couldn't be separated easily. For separation and demulsification of this emulsion, some chemical, mechanical, thermal and electrical methods can be executed. In chemical method, demulsifier materials can be added to water-in-oil emulsion. Different parameters such as properties of oil, type and concentration of demulsifiers, volume factor of water and etc., can affect the efficiency of water-in-oil emulsion separation. In this study, emulsification mechanism,... 

In this study, the dynamics of microparticles in a straight microchannel in the presence of an inhomogeneous oscillating electric field have been simulated by the immersed boundary method in combination with the lattice Boltzmann Navier-Stokes solver and the lattice Boltzmann method for solving the Poisson equation. The effect of the electric field on the location and number of particle equilibrium positions have been examined. In the absence of the electric field, circular particles will migrate to two stable equilibrium positions. The site of these equilibrium positions depends on the particle size and the fluid flow rate and is independent of the particle density. In the case of negative... 

With rising oil prices and predictions about the future of hydrocarbon reserves, issues of enhanced oil recovery and optimal production of existing reservoirs are of particular importance. In this study, molecular dynamics simulation was used to study the absorption of silica nanoparticles with surface groups at the interface of water and decane. The effect of surface chemistry of silica nanoparticles on the interface properties of water-decane with changing the surface groups was simulated. The initial surface factor of nanoparticle is hydroxyl (OH), which is called a hydrophilic surface agent. Nanoparticles were modified by methyl and ethyl surface agents to increase the hydrophobicity and... 

Separation of particles and cells is one of the most important and practical methods in fields such as biomedicine, medicine and industry. In microfluidics There are various methods for particles and cells separation According to the source of them, they can be categorised as active and passive techniques. Active techniques rely on an external force field. The most important advantage of this method is controlling the force on the particles during the experiment. However, the flow speed is always limited because particles must be exposed to the outer force field for sufficient duration to achieve effective functionality. passive techniques depend entirely on the channel geometry or intrinsic... 

Today, with the development of micro-technology in chemical reactions, the use of appropriate systems for the separation and purification of synthesized chemicals seems to be necessary. In this study, the continuous synthesis of bromide-lithium exchange reaction and the separation of organic and aqueous phase products in micro systems was investigated.The method used to construct micro-separator and micro reactor, a laser engraving technique, and thermal bonding of glass to glass.In the first step, the factors affecting the separation of organic and aqueous phase in the capillary micro-separator, such as the width of the capillary, the length of the capillary, the number of capillaries and... 

During the past years, microtechnologies have been extensively used in Chemical reactions. In these systems, using an optimal system for separation, and purification of Chemical Products is of great importance. In this study, we have focused on the separation of organic-phase and aqueous-phase Products in 26 fabricated microsystems. The fabrication method of the glass microseparators consists of Lithography, Acidization, and Glass-to-Glass Thermal Connection. We have also studied key parameters of organic and aqueous phase separation in continuous capillary microseparators like the width of the capillary channel, length of the capillary channel, number of the capillary channels, and flow of... 

For designing a unit operation, knowledge about physical properties is essential. This is attained either by direct measurement, which needs spending time and cost or, using proposed correlations. This project is subjected to theoretical analysis of viscosity as the most important rheological property of dilute suspensions of microgels, or in other words colloidal suspensions of porous spheres. They are applied in drug delivery, enhanced oil recovery, synthesis of catalyst and adsorption of heavy metal ions from aqueous systems for water purification purposes. In dilute suspensions particles are faraway from each other and there is no interaction between them therefore, it is better to... 

Gas pollutants are included volatile inorganic compositions and odorous materials, which are harmful and dangerous for environment and human health. There are several methods for removing gas pollutants such as physical, chemical and biological methods. In this work, we discuss about ethyl-mercaptan adsorption in LPG by ZSM-5 zeolite and in use of micro systems (micro channels). This work is also concerned about micro channel coating by ZSM-5 and NaY zeolites on glass and the method of coating with (3-Chloropropyl) trimethoxysilane linker. After selecting the appropriate method for zeolite coating, we proceed to micro channel coating. In this research, four different designs of micro channel... 

Lately, some investigators of polymer engineering group are working to do continuous polymer solution casting process, rather than batch process for flat sheet membrane production. For this, they use a doctor blade system but, they faced some problems during coating process. From experimental observations of the studied system, some inappropriate vorticities were seen. That’s why the system forms a non-uniform film of the solution. Air bubbling occurs at system exit which is undesirable as well. In this study simulation and optimization has been done for forming thin film in doctor blade system. COMSOL Multiphysics 4.3b was used in purpose of simulating which works on numerical finite...