Sharif Digital Repository

A gas turbine which output 18MW power exploded after 3h of ordinary operation and after 4,785 starts. The turbine's rotor had undergone repair after 77,000 operating hours. A piece was cut from the failed marriage bolt and tested using atomic absorption spectrometry in order to know the grade of the alloy. It was found that the marriage bolt is made from ASTM A193 B16 steel which is suitable. Hardness and microhardness measurement was also determined and showed that it was within the range of the specified hardness for ASTM A193 B16 steel. The marriage bolt's mechanical properties also meet technical specifications and showed that it contained anti-corrosion properties. Visual examination... 

In this article, the control of an electrohydrodynamic 3D printer is studied. The proposed controller has a hybrid piecewise linear feedback form which is designed based on a hybrid model of the printer. The hybrid model is obtained via a gray box identification process whose structure is proposed utilizing the results of the finite element simulation of the printer within the COMSOL Multiphysics software. The asymptotic stability of the hybrid control combined with a hybrid observer is proven using the Lyapunov theory. In addition, the obtained control is applied to the finite element model of the printer to check its performance which shows the success of the controlled system in tracking... 

Structures with inappropriate distributions of strength and stiffness have performed poorly in recent earthquakes, and most of the observed collapses have been related to some extent to configuration problems or a wrong conceptual design. Shear building models of multi-story structures are considered in this study and are subjected to a group of severe earthquakes. It is shown that the strength distribution patterns suggested by the seismic codes do not lead to a uniform distribution and minimum amount of ductility, drift, and damage. A new pattern is proposed that is a function of the period of the structure and the target ductility. An iterative approach is also developed to determine the... 

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination... 

Aluminum reinforced with a large amount (up to about 55 vol.%) of Al 3Ti particles can be fabricated from Al-20Ti elemental nanometer-sized powder mixture via in-situ two step hot press sintering (TSS). For production of intermetallic reinforced in-situ composite, TSS can provide elevated temperature to facilitate the formation of intermetallic phase in situ and hot consolidation to form a fully dense solid. The first step sintering was employed at a higher temperature to obtain an initial high density, and the second step was held at a lower temperature by isothermal sintering for more time than the first one to increase bulk density without significant grain growth. The optimum TSS regime... 

Herein, we report a double-layer photoanode electrode composed of TiO2 nanoparticles active layer and a mixture of nanoparticles and newly proposed skein-like nanotubes (NTs) top layer. Such structure performs well in solar light harvesting due to first, the top layer exhibits superior light scattering and second, the active layer with high dye-loading can make better use of the back-scattered light. The results reveal that 30-40 nm nanoparticles have anatase structure, whereas 5-7 μm skein-like NTs show a mixture of anatase and rutile phases. Photovoltaic measurements demonstrate that by tuning mass ratio between nanoparticles and skein-like NTs, the cells based on single-layer photoanode... 

Herein, we demonstrate a facile low temperature chemical bath deposition approach to deposit a light scattering layer on a nanostructured mesoporous TiO2 bottom layer in a dye-sensitized solar cell architecture. Large TiO2 nanoparticles were formed on the top surface of photoanode electrodes via hydrolysis of TiCl4 at 70 °C. We controlled the size and agglomeration of these TiO2 nanoparticles by altering the concentration of TiCl4 in the chemical bath during the hydrolysis process. Electron microscope images revealed that mono-dispersed scattering particles having uneven surfaces with diameters between 100 to 300 nm formed on the mesoporous titania layer. The scattering behavior of the... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

The effect of condensate blockage on the pressure drop near the well bore has been studied. Two types of single well simulations have been conducted and pressure drop due to condensate blockage has been quantified based on variation of gas relative permeabilities in near well bore area. The relationship of condensate banking pressure drop, gas rate and reservoir quality has been presented. It is shown that for a poor reservoir quality, condensate blockage can increase the pressure drop up to 200% of the pressure drop in the tubing  

This research studied the effect of adding TiO2 nanoparticles along with Al2O3 and Y2O3 additives on the physical and mechanical properties of a SiC-matrix composite. The samples were fabricated through a pressureless process at 1900 °C. The results showed that the addition of TiO2 nanoparticles up to 4.5 wt% inhibited the excessive growth of SiC grains. According to the investigations, the microstructure and final properties of composites were affected by density, synthesized phases as well as their distribution in the matrix, and grain size. The highest density, Young's modulus, hardness, indentation fracture resistance, and flexural strength, alongside with the lowest brittleness index... 

In this study, a general 3D distributed modeling of Trolling-Mode AFM (TR-AFM) as a nanorobot is presented to analyze the 2D manipulation process of a spherical cell. To this aim, the analysis is categorized into 3 sections. In the first section, 6 deformations of TR-AFM are taken into account, and the standard model of the system is obtained. Moreover, the system is simulated in ANSYS Workbench. The results of modal and transient analyses of the system from both analytical and software methods reveal high agreement, which confirms the accuracy of the presented analytical model. In the second section, by utilizing the 3D derived model, displacement of a spherical yeast single cell (W303)... 

Herein, we demonstrate a facile low temperature approach to prepare a gel polymer electrolyte (GPE) based on the triiodide/iodide redox couple in a quasi-solid-state dye-sensitized solar cell (DSSC). Only one polymeric agent (i.e., hydroxypropyl cellulose (HPC)) is used for the preparation of a non-volatile GPE system for the standard liquid electrolyte containing 1-methyl-3-propylimidazolium iodide (MPII). The prepared GPE completely penetrates into a TiO2 photoanode at room temperature due to the uniform distribution of Ti, Ru and I elements in the cross-section of the electrode, forming an interpenetrating GPE/TiO2 network to access all dye molecules. The GPE with the optimum HPC : MPII... 

The biodegradation behavior of Mg, coated by polymethyl methacrylate as well as polymethyl methacrylate (PMMA)−bioactive glass (BG) composite was investigated. Electrophoretic deposition and dip coating techniques were adopted to prepare composite coating using a suspension of different percentages of the above two chemical materials. The deposited coatings were characterized using SEM, EDS, FTIR, and water contact angle measurements. Biodegradation behavior study of the coated Mg was performed using linear polarization, impedance spectroscopy, and immersion tests in simulated body fluid. The compact and homogeneous composite coating was developed as evidenced by electron microscopy results.... 

During miscible displacements in fractured porous media, one of the most important factors that plays a significant role in oil production is the matrix-fracture interaction. In this work, a series of hydrocarbon injection experiments have been performed on a fractured glass micromodel that was designed specifically to study matrix-fracture interaction. A high quality image analysis method was used to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that in the case of unit viscosity ratio, the injection rate increased the slope of recovery curve and consequently improved the final... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Iran is engaged in a long-term program to improve and strengthen its position among producers of petroleum in the world. In this regard, many projects are planned and executed in different fields related to oil and gas industry. Prior to investment in new projects, it is essential to understand and manage major corporate risks and their related consequences. Due to nature of petroleum industry, Health, Safety and Environmental (HSE) issues are associated with such projects and have always been matters of concern. This paper directs readers towards the integrated HSE approach from concept to affect project construction phase. The process of oil production includes exploration, extraction and... 

The power supply of microwave tubes has high voltage and the possibility of produce high power pulse, which called in modulator. In this work, the results of design, construction and characterization of a direct drive pulse modulator for driving high power short pulse-width magnetron are reported. The sub-assemblies of modulator are; a primary high voltage supply, a switch bank with drivers and snubber circuits, a filament circuit, a digital control circuit with sensors and finally a pulse transformer. This paper is concerned with introduction and presentation of experimental evaluation of a new drive method for high power high voltage modulating-cathode microwave tubes. ©2009 IEEE  

Some factors like environmental conditions and manufacturing errors affect performance of a MEMS rate gyroscope. Because they may result to parameter mismatch between the designed gyroscope and the fabricated one. The Parametrically excited gyros are more robust to these changes than the harmonically excited gyros. However, these types of gyros also experience reduction in their accuracy in angular velocity determination due to these changes. One of parameters that affect the accuracy of the gyroscope is quadrature error that here, its effect in the accuracy of angular velocity determination is investigated in two typically designed harmonically and parametrically excited MEMS gyroscopes.... 

In this work, a chemometrics-based strategy is developed for quantitative mass spectrometry imaging (MSI). In this regard, quantification of chlordecone as a carcinogenic organochlorinated pesticide (C10Cll0O) in mouse liver using the matrix-assisted laser desorption ionization MSI (MALDI-MSI) method is used as a case study. The MSI datasets corresponded to 1, 5 and 10 days of mouse exposure to the standard chlordecone in the quantity range of 0 to 450 μg g-1. The binning approach in the m/z direction is used to group high resolution m/z values and to reduce the big data size. To consider the effect of bin size on the quality of results, three different bin sizes of 0.25, 0.5 and 1.0 were... 

MEMS rate gyroscopes are prone to different errors because of environmental conditions and manufacturing errors. These errors can result to mismatch between the fabricated gyros and the designed ones. Different environmental conditions and disturbances can change the parameters and specifications of a gyro, and its sensitivity may deteriorate, since the parameters are different from the optimal ones. External linear acceleration is one of the main environmental disturbances that may change the behavior of an MEMS rate gyro that its effect on the accuracy of an MEMS proof mass gyroscope is found here. This is done by finding the equations of motion of gyroscope in presence of acceleration and...