Sharif Digital Repository

In this study, epoxy resin has been modified by nano-clay additives using direct mixing method and epoxy-clay nanocomposites were designed and produced with optimized percentage of clay content. By adding the powder of born carbide and lead oxide in nanocomposites new compounds are obtained. The results are used for protection against neutron and gamma rays, respectively. After preparation of epoxy-clay-born carbide and epoxy- clay-lead oxide nanocomposite the effects of irradiation and carbon fiber on mechanical and thermal properties of nanocomposites were examined. The Nanocomposites were exposed to Electron Beam Irradiation (EBI) in 100 and 500 kGy doses to investigate the effect of... 

In the context of differential privacy, a data holder has confidential information about users. The goal is to provide a randomized algorithm that takes this information as input and outputs an aggregation of the input. The algorithm must have the property that for any neighboring input pairs, the output distribution of the algorithm is close. One problem in differential privacy research is the release of shortest distances in a weighted graph. This model, first studied by Adam Sealfon, involves an edge-weighted graph G=(V, E) with weights w : E → R, where the topology of the graph is public and the private information is the weight of the edges. The aim is to provide an (ϵ, δ)-DP algorithm... 

The creation of materials with properties at the human satisfaction and beyond what is found in nature has long been the subject of various studies. One of the structures that have received a lot of attention recently is metamaterial. Metamaterials are engineered and purposefully designed materials that, due to this aspect, show unique properties that are not usually found in nature. These unique properties are mainly due to their designed microstructure, which exhibits properties beyond the base material from which they are made. The pentamod metamaterials are among these materials with uncommon properties. A pentamod metamaterial is a three-dimensional structure with a specific... 

In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom... 

Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater... 

Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of... 

In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

Continuous separation processes in microfluidic devices experienced a steep rise in attention during the last two decades. Among the different separation processes, liquid-liquid extraction especially benefits from the short molecular diffusion distance and large specific interfacial area, as these are advantageous for effective mass transport. In the present study, glass-based microfluidic devices have been fabricated utilizing laser ablation and wet chemical etching methods then experiments and numerical simulation were carried out to investigate hydrodynamic behavior of fluid flow in Y-junction microfluidic. In order to achieve phase separation at the end of the microchannel, a phase... 

There are two ways for quality control testing of power transmission systems in various industries. A method of testing the specific positions of power transmission, and final testing (Automotive road tests), respectively. In various stages of design, manufacturing and quality control components, power transmission systems, require detailed information on the performance of parts. It's a special place for each transmission experiment designed and manufactured. Gearbox as an important component of the transmission of this issue is no exception. Magnetic gearbox has a new generation of power transmission systems in the last decade of the optimization is presented. In recent years, several... 

The synthesis and usage of TiO2/ZnO nanocomposite thin film in antibacterial activity against E-coli were experimented through a systematic research. TiO2/ZnO nanocomposite films can demonstrate different properties like gas sensing, self cleaning and treatment of the broad range of aqueous pollutants when it is exposed to light with wavelengths less than 400 nm. This phenomenon happens because of the photocatalytic reactions in the nanocomposite thin film which cause active species production on the surface of the thin film. The nanocomposite synthesis was based on sol-gel process in atmospheric pressure. In this study titanium dioxide is prepared by sol gel method from titanium... 

This thesis is related to the identification and design of a robust controller for an electrohydrodynamic printer system. As an emerging technology, this printer uses a strong electric field to deliver fluid ink from various conductive materials to the substrate. Modeling this system is complex due to the effect of different variables on its performance. In this project, first a simplified model with numerical solution data of the COMSOL model that is validated experimentaly is proposed. Then, by presenting a new control method that is a variant of an active disturbance rejection control baesd on extended state observer has been controlled. The new control method is actually an amendment to... 

There is a specific focus in sustainable transportation to three domains of safety, air pollution, and energy consumption. All these three domains are affected by the vehicle type choice. An important factor to estimate the impact of vehicle type choice on safety, air pollution, and the energy consumption is self-selection, defined as the tendency of people to make their travel-related choices based on their abilities, needs, and preferences. Ignoring the self-selection effect may cause a bias in the estimation of the coefficients of affecting variables on the travel-related choice. The main objective of this thesis is to study the self-selection effect in vehicle type choice considering the... 

The Iran-Iraq war between 1980 to 1988 involved Iran's western borders and inflicted heavy casualties. This war was also spread to the central provinces of Iran in several periods as a result of Iraqi missile attacks, known as the War of Cities. The attacks were mainly intended to intimidate people, leaving relatively few deaths and injuries. In this study, we seek to estimate part of the hidden and long run impacts of these attacks. Using a two-percent sample of Iran’s 1990 census and the information of the location and timing of missile attacks, and by incorporating the difference in difference method, we estimate the causal impact of missile attacks on the years of education of those who... 

In order to use the high performance capabilities of a computing system, first it is required to provide a proper modelling for the job and the system's environment. Second, it is required to design scheduling and offloading algorithms based on the job and the system modeling and third for evaluating the performance of these algorithms. It is needed to either simulate them or prove their approximation factors. This project aims to carry out these three parts for the Edge Computing environment. The laid out model of the system in this thesis consists of many devices that are distributed around the network, which they can execute tasks parallel to each other, and between each two devices there... 

Foil gas bearings are compliant surface, self-acting hydrodynamic bearings that use ambient gas as their working fluid. They do not require external pressurization and are typically constructed from several layers of sheet metal foils. In high-speed, high-temperature applications the GFB’s have the advantage of developing higher load capacities than with fixed geometry gas bearings. Since GFB’s have a complex structure consisting of a spring-like substructure with an overlying flexible surface, there exists a great variety of permutations on any given design. At current work presents a 1D model for GFB with couple solving Reynolds and Euler-Bernoulli beam equation. This mean top foil assume to... 

Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the... 

Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

In this study the feasibility of xenon separation from xenon-krypton mixture was investigated by utilizing of the chromatographic column filled with nano and micron sized NaY zeolite. For this purpose the nano NaY with the yield of 100% related to Al2O3 and the average size of 98.6 nm was synthesized through the clear solution method with the mid-adding of NaOH. Furthermore, a novel method for granulation of nano zeolite was developed by utilizing sodium alginate as an external template. In this method the production of uniform spherical granules with the different sizes in the range of several milimiteres to 100 µm was easily performed. Moreover, the results showed that the adding of...