Sharif Digital Repository

Increasing in social communication via electronic ways has been made social network analysis of these communications more important each day. One of the most important aspects in social network analysis is community detection in such networks. There are many different ways to extract communities from social graph structure which in some of them the content of communication between actors has been noticed in community extraction algorithm. In this thesis after a short survey over advantages and disadvantages of existing methods for community detection, a new method for extracting communities from social networks has been suggested which in addition to streaming property of data it spot the... 

Studying the performance of flow meters is of great importance in order to improve their quality. In this study, we are looking for an optimal design for a turbine flow meter in which the measurement accuracy, pressure drop and response speed indices are improved. For this purpose, a turbine flow meter with a diameter of 2 inches has been selected and its performance has been numerically modeled using computational fluid dynamics in a steady and transient state. By modeling the steady state, the measurement accuracy and pressure drop indices are obtained, and by modeling the transient state, the response time of the flow meter is obtained. In order to increase the accuracy of numerical... 

One way to increase the efficiency and improve the performance of a gas turbine is to increase the inlet gas temperature. On the other hand, the inlet temperature has an allowable operating range, and increasing it beyond the tolerance of the alloys used in turbine blades causes structural defects and significantly reduces the blade life. Therefore, to increase the blade life, various cooling methods such as internal and layer cooling are used. Considering the blade geometry and cooling paths, accuracy in the manufacturing process is doubly important in the production of these blades. The importance of this issue is that if the cooling channels produced are inconsistent with the design... 

The standard model of Cosmology (SM), based on Einstein’s theory of general relativity (GR), is the best model in describing the cosmic-scale observations. In galactic scales, however, galactic dynamics show a discrepancy between the observed luminous mass and the predicted value from the theory. Two approaches are suggested to eliminate this inconsistency: assuming the existence of dark matter within the context of GR, or modifying the theory of gravity in galactic scales, like MOND or MOG. In this thesis, we study the spherical collapse and the formation of shell galaxies in MOG, in comparison with SM. We introduce the action and the field equations of MOG and the equation of motion of a... 

Strongly Rayleigh measures are an important class of negatively dependent (repulsive) probability measures. These measures are defined via a geometric condition, called “real stability”, on their generating polynomials, and have interesting probabilistic properties. On one important property of negatively dependent measures is their rigid dependence structure. In other words, the it is impossible for these measures to have strong overall dependencies. In this thesis, we study two manifestations if this phenomenon: (1) paving property and (2) tail triviality. Informally, the paving property states that it is possible to partition the set of the components of every strongly Rayleigh random... 

In this thesis, consider three important questions in the Iranian Wholesale Electricity Market (IWEM) and answer its. The first one is whether the bidding behavior of the firms in the IWEM has been ex-post optimal? The results of the research show that, on average, the firm’s bidding behavior didn’t optimal in the IWEM, and therefore the bidding strategy of them could be improved. This issue is importance from the regulatory viewpoint in terms of assessing market efficiency and market power of firms, as well as from the firm’s point of view to improve the bidding strategy and increase its profits. The second issue is the assessment of the firm’s ability to exercise unilateral market power by... 

Office buildings, as one of the largest energy consumers in the building sector, play a significant role in national energy consumption. Given the importance of energy optimization in achieving sustainable development, reducing energy consumption in these buildings not only lowers costs but also helps preserve natural resources and mitigate environmental impacts. In this regard, providing energy optimization solutions, improving efficiency, and revising operational patterns play a key role in reducing energy consumption and ensuring user comfort. On the other hand, attention to indoor air quality is equally critical, as polluted indoor air can negatively affect the health and productivity of... 

This study develops an innovative modeling framework for the integrated assessment of energy systems, environmental impacts of greenhouse gas (GHG) emissions, and human health effects of air pollution. The primary objective is to analyze the co-benefits between GHG emission mitigation and the health benefits resulting from improved air quality for metropolises, moving beyond the conventional economic costs typically evaluated by energy models. For this purpose, a structured linkage is established between downscaling models for temperature, energy demand, energy supply, emissions, air quality, and human health impact assessment. An innovative recurrent ensemble model is designed for... 

There are two ways for quality control testing of power transmission systems in various industries. A method of testing the specific positions of power transmission, and final testing (Automotive road tests), respectively. In various stages of design, manufacturing and quality control components, power transmission systems, require detailed information on the performance of parts. It's a special place for each transmission experiment designed and manufactured. Gearbox as an important component of the transmission of this issue is no exception. Magnetic gearbox has a new generation of power transmission systems in the last decade of the optimization is presented. In recent years, several... 

The synthesis and usage of TiO2/ZnO nanocomposite thin film in antibacterial activity against E-coli were experimented through a systematic research. TiO2/ZnO nanocomposite films can demonstrate different properties like gas sensing, self cleaning and treatment of the broad range of aqueous pollutants when it is exposed to light with wavelengths less than 400 nm. This phenomenon happens because of the photocatalytic reactions in the nanocomposite thin film which cause active species production on the surface of the thin film. The nanocomposite synthesis was based on sol-gel process in atmospheric pressure. In this study titanium dioxide is prepared by sol gel method from titanium... 

This thesis is related to the identification and design of a robust controller for an electrohydrodynamic printer system. As an emerging technology, this printer uses a strong electric field to deliver fluid ink from various conductive materials to the substrate. Modeling this system is complex due to the effect of different variables on its performance. In this project, first a simplified model with numerical solution data of the COMSOL model that is validated experimentaly is proposed. Then, by presenting a new control method that is a variant of an active disturbance rejection control baesd on extended state observer has been controlled. The new control method is actually an amendment to... 

There is a specific focus in sustainable transportation to three domains of safety, air pollution, and energy consumption. All these three domains are affected by the vehicle type choice. An important factor to estimate the impact of vehicle type choice on safety, air pollution, and the energy consumption is self-selection, defined as the tendency of people to make their travel-related choices based on their abilities, needs, and preferences. Ignoring the self-selection effect may cause a bias in the estimation of the coefficients of affecting variables on the travel-related choice. The main objective of this thesis is to study the self-selection effect in vehicle type choice considering the... 

The Iran-Iraq war between 1980 to 1988 involved Iran's western borders and inflicted heavy casualties. This war was also spread to the central provinces of Iran in several periods as a result of Iraqi missile attacks, known as the War of Cities. The attacks were mainly intended to intimidate people, leaving relatively few deaths and injuries. In this study, we seek to estimate part of the hidden and long run impacts of these attacks. Using a two-percent sample of Iran’s 1990 census and the information of the location and timing of missile attacks, and by incorporating the difference in difference method, we estimate the causal impact of missile attacks on the years of education of those who... 

In order to use the high performance capabilities of a computing system, first it is required to provide a proper modelling for the job and the system's environment. Second, it is required to design scheduling and offloading algorithms based on the job and the system modeling and third for evaluating the performance of these algorithms. It is needed to either simulate them or prove their approximation factors. This project aims to carry out these three parts for the Edge Computing environment. The laid out model of the system in this thesis consists of many devices that are distributed around the network, which they can execute tasks parallel to each other, and between each two devices there... 

This work describes the effect of hydroxyapatite with different morphology including nanorods and whisker on the properties of hydroxyapatite/polycaprolactone (HA/PCL) composite. Biodegradable polymer/Hydroxyapatite (HA) composites with the morphology of nanorods and whisker of (HA) as bone replacement scaffolds are synthesized by sol-gel and hydrothermal methods, respectively with a Ca/P ratio of 1.67 and 20:80 (HA/PCL).The crystallization behavior and porosity of HA/PCL composite are studied by scanning electron microscope and X-Ray diffraction. The response of bone marrow-derived human mesenchymal stem cells (hMSCs) in terms of cell proliferation and differentiation to the osteoblastic... 

In the present work, we have designed a novel CdS/CdTe solar cell based on CdS nanowires, as a window layer, and CdTe nanoparticles, as a absorber layer. CdS nanowires and CdTe nanoparticles were synthesized by solvothermal method. The samples were characterized by X-ray diffraction diffractometer (XRD), field emission scanning electron microscope (FE-SEM), Atomic Force Microscope (AFM) and Ultraviolet–Visible (UV–vis) spectroscopy spectrometer. Photocurrent measurements were carried out using a 150 W xenon lamp with an air-mass (AM) 1.5 filter. The performance of the solar cell based on the CdS nanowire (NW-CdS) film with 225 nm thickness and CdTe nanoparticle (NP-CdTe) film with 6 μm... 

Multi-part rotating parts are used in various industries with very high revolutions. Therefore, the method of assembling each part and keeping the axis of rotation of each part close to the axis passing through two supports (bearings) is important. In this research, three main steps are followed, the development of the differential equations governing the multi-part rotating system and the calculation of the range of oscillations created at the critical points, and then the calculation of the optimal assembly angles with the aim of reducing the introduced oscillations, and finally the discussion of crossing the speeds A crisis is being investigated. The method of obtaining the system of...