Sharif Digital Repository

Phase morphology, state of compatibility and various properties of blends of polycarbonate (PC) with bottle-grade and fibre-grade polyethylene terephthalate (BPET and FPET, respectively) were investigated. It was found that these blends have two-phase separated morphology with partial miscibility. Scanning electron micrographs revealed separated domains of PC-rich and PET-rich zones. PC domains appear spherical increasing in size from 2 μm for PC20/FPET80 up to about 5 μm for PC60/FPET40 blend. Further increase in PC content up to 80% caused phase inversion in which FPET appears as finely dispersed domains in continuous PC matrix. Tg of PC-rich phase decreased from 153 deg;C for pure PC down... 

Discriminative subspace analysis is a popular approach for a variety of applications. There is a growing interest in subspace learning techniques for face recognition. Principal component analysis (PCA) and eigenfaces are two important subspace analysis methods have been widely applied in a variety of areas. However, the excessive dimension of data space often causes the curse of dimensionality dilemma, expensive computational cost, and sometimes the singularity problem. In this paper, a new supervised discriminative subspace analysis is presented by encoding face image as a high order general tensor. As face space can be considered as a nonlinear submanifold embedded in the tensor space, a... 

Cephalometric analysis has an important role in diagnosis and treatment of dental disharmonies. In this paper, we propose an efficient, fast, and automatic method to localize cephalometric landmarks on digitized x-ray images. The proposed algorithm uses the information of the marked landmarks on a reference normal cephalometry image as the prior knowledge. In the first step of the proposed method, the image is automatically divided into several regions and three main control points are located on it. These are then matched to their corresponding points on the reference image to form an affine transform matrix that describes how other points on the reference image should be mapped to the... 

In this study a membrane biological reactor (MBR) was operated at 25±1 °C and pH = 7.5±0.5 to treat synthetic wastewater containing high phenol concentrations. Removal efficiencies of phenol and chemical oxygen demand (COD)were evaluated at four various hydraulic retention times (HRTs) of 24, 12, 8, and 4 hours. The removal rate of phenol (5.51 kg-Phenol kg-VSS-1 d-1), observed at HRT of 4 h,was the highest phenol degradation rate in the literature.According toCODtests, therewere no significant organic matter in the effluent, and phenol was degraded completely by mixed culture. Substrate inhibition was calculated from experimental growth parameters using the Haldane, Yano, and Edward... 

This paper presents a new method for the design of variable fractional delay (VFD) FIR digital filters using Genetic Algorithm (GA). Each sub-filter of Farrow structure is designed individually with defined accuracy and bandwidth. A variable mutation probability is also employed, which improves the accuracy of the solution. Compared with existing methods, it reduces the computational complexity and enhances the design flexibility. Furthermore, a simple GA is used to compute the filter coefficients in canonic singed digit (CSD) representations. Since this algorithm selects the initial population in CSD representation and searches for the digits between [-1 1], most of the digits become zero.... 

In the image segmentation field, traditional techniques do not completely meet the segmentation challenges mostly posed by inherently fuzzy images. Fuzzy connectedness and fuzzy clustering are considered as two well-known techniques for introducing fuzzy concepts to the problem of image segmentation. Fuzzy connectedness-based Segmentation methods consider spatial relation of image pixels by "hanging togetherness" a notion based on intensity homogeneity. But, they do not inherently utilize feature information of image pixels. On the other hand, as the segmentation domain of fuzzy clustering-based methods is the feature space they do not consider spatial relations among image pixels. Recently,... 

A sonochemistry-based synthesis method was used to produce nanocrystalline nickel oxide powder with ∼20 nm average crystallite diameter from Ni(OH)2 precursor. Ultrasound waves were applied to the primary solution to intensify the Ni(OH)2 precipitation. Dried precipitates were calcined at 320 °C to form nanocrystalline NiO particles. The morphology of the produced powder was characterized by transmission electron microscopy. Using sonochemical waves resulted in lowering of the size of the nickel oxide crystallites. FT-IR spectroscopy and X-ray diffraction revealed high purity well-crystallized structure of the synthesized powder. Photoluminescence spectroscopy confirmed production of a wide... 

We theoretically investigate the magnetoelastic coupling (MEC) and its effect on magnon transport in two-dimensional antiferromagnets with a honeycomb lattice. MEC coefficients along with magnetic exchange parameters and spring constants are computed for monolayers of transition-metal trichalcogenides with Néel magnetic order (MnPS3 and VPS3) and zigzag order (CrSiTe3, NiPS3, and NiPSe3) by ab initio calculations. Using these parameters, we predict that the spin-Nernst coefficient is significantly enhanced due to magnetoelastic coupling. Our study shows that although Dzyaloshinskii-Moriya interaction can produce spin-Nernst effect in these materials, other mechanisms such as magnon-phonon... 

The main goal of this study is to investigate the role of vascular graft thickness in wall stress gradient in anastomosis region. Atherosclerosis is a common heart disease causes high mortality rates every year. The gold standard treatment of atherosclerosis is replacing with autologous vein extracted from patient's body. Since proper autologous vein is limited, researchers have made efforts to achieve compliance engineered blood vessels. Mechanical stress has great effect on both smooth muscle cells and endothelial cells and it is considered as a stimulus in plaque formation. In this study, we evaluate the role of thickness in wall stress of anastomosis region. For this purpose, two... 

The main goal of this study is to investigate the role of vascular graft thickness in wall stress gradient in anastomosis region. Atherosclerosis is a common heart disease causes high mortality rates every year. The gold standard treatment of atherosclerosis is replacing with autologous vein extracted from patient's body. Since proper autologous vein is limited, researchers have made efforts to achieve compliance engineered blood vessels. Mechanical stress has great effect on both smooth muscle cells and endothelial cells and it is considered as a stimulus in plaque formation. In this study, we evaluate the role of thickness in wall stress of anastomosis region. For this purpose, two... 

Previous in-vivo investigations on the stabilizing efficacy of knee bracing for ACL reconstructed patients have been often limited to 20-30 degrees of knee flexion. In this study, the effectiveness of a uniaxial hinged functional brace to improve the knee stability was assessed at 30, 60 and 90 degrees of knee flexion. Arthrometry tests were conducted on 15 healthy subjects before and following wearing the brace and the tibial displacements were measured at up to 150 N anterior forces. Results indicated that functional bracing has a significant stabilizing effect throughout the range of knee flexion examined (p < 0.05). The rate of effectiveness, however, was not consistent across the... 

Quality of Experience (QoE) measures the overall quality of a service from users’ point of view by considering several system, human, and contextual factors. There exist various objective and subjective methods for QoE prediction. Although the subjective approach is more expensive and challenging than the objective approach, QoE’s level can be more accurately determined by a subjective test. This paper investigates various features affecting QoE by proposing a comprehensive subjective evaluation. First, we show that many unconsidered factors can significantly affect QoE. We have generated voice samples featuring different values for novel factors related to the speaker, signal, and network.... 

Unidirectional current flow is at the heart of modern electronics, which has been conceived by making p–n junctions or Schottky barriers between different kinds of materials. Within such elements, however, synthesis of thin film lateral heterostructures has so far remained challenging. Here, a one-step simple synthesis of p-type, n-type, and metallic lateral heterostructures using bipolar electrodeposition (BPE) technique is reported. Molybdenum oxides and sulfides with gradient of oxygen and sulfur are deposited at a metallic substrate. A lateral heterostructure is achieved with electrical properties that change from p- to n-type semiconductor and then to metal by moving in the plane of the... 

This paper proposes a deep deterministic policy gradient (DDPG) based nonlinear integral backstepping (NIB) in combination with model free control (MFC) for pitch angle control of variable speed wind turbine. In particular, the controller has been presented as a digital twin (DT) concept, which is an increasingly growing method in a variety of applications. In DDPG-NIB-MFC, the pitch angle is considered as the control input that depends on the optimal rotor speed, which is usually derived from effective wind speed. The system stability according to the Lyapunov theory can be achieved by the recursive nature of the backstepping theory and the integral action has been used to compensate for... 

As heating, ventilation, and air conditioning (HVAC) systems have become one of the most contributing systems in energy consumption in the world, the control of these large-scale systems remains a challenging duty due to the decoupling effects of control variables. Accordingly, the penetration of these types of systems in all-smart buildings has increased in recent years. Furthermore, the application of digital twin as a fast-growing concept is being developed. In HVAC systems, independent and accurate control of temperature and humidity of the indoor air has been playing an undeniable role in reducing energy consumption. In this paper, to have cost-effective energy management in a... 

This paper discusses the optimal deployment of a cluster consisting of connected AC-coupled, low voltage (48 V) multi-carrier microgrids within an integrated framework. The utilization of this integrated framework proves to be an effective approach for enhancing the reliability, resiliency, and operational quality of the clustered multi-carrier microgrids. Furthermore, it enables improved utilization of distributed energy resources in both grid-connected and stand-alone scenarios. In order to address local objectives, this paper presents a hybrid approach to determine the optimal integration and size of distributed energy resources in autonomous multi-carrier microgrids. Additionally, the... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

Lightweight aggregate is commonly used to reduce the self-weight of concrete elements which can efficiently mitigate the environmental impact. This study investigates the mechanical performance of normal weight aggregate concrete (NWAC) and Lightweight aggregate concrete (LWAC) exposed to high temperature, focusing on developing a predictive model for the stress-strain relationship of the LWAC based on the property of cement, silica fume, light weight aggregate and water/cement ratio. Mechanical properties of 30 different mixtures, including uniaxial compressive stress–strain relationship, compressive strength, modulus of elasticity, and failure strain are determined before and after high... 

Gel-fiber structure with the potential of extracellular matrix (ECM) mimics can be introduced as a suitable candidate for bioengineering applications. In this study, piezoelectric gellan gel-fiber was prepared with incorporating poly(vinylidenefluoride) (PVDF)/glass-flake in the gellan matrix. Glass-flake nanoparticles were modified with silane group, PVDF/glass-flake nanofibers were synthesized and short-strand nanofibers were fabricated using the mechanical homogenizer method. Brunauer–Emmett–Teller (BET), Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) analyses were used for surface modification study, and scanning electron microscopy (SEM),... 

The feasibility of employing the biological activated carbon (BAC) process to debilitate azo dye Carmoisine by Klebsiella spp. was investigated. Plate assay revealed the capability of Klebsiella spp. for removal of Carmoisine via degradation. Kinetic parameters were measured for Carmoisine debilitation by Klebsiella spp. using the suspended anaerobic process. Two types of granular and rod-shaped activated carbon were used to form the biological beds in order to study the Carmoisine debilitation in batch processes. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to indicate the colonization and biofilm formation of bacteria grown on activated carbon...