Sharif Digital Repository

Modern technology is accompanied by miniaturized devices. With increasing the use of micro satellites and micro airial vehicles (MAVs), finding new power-generating resources is inevitable. Batteries were always an option however high efficiency, long life-span and environmental consideration have encouraged the researches to focus on micro combustion. On the other hand, hydrocarbon fuel contains about 100 times more energy per unit mass than lithium-ion batteries. Micro combustion is defined as a combustion which is occurred bellow quenching distance and old literatures were uncertain about occurrence of such combustion. In this paper we present the fundamental concepts of micro combustion... 

The current work is carried out to characterize welding of AISI 304 Austenitic Stainless Steel to Ductile Cast Iron. The welding method was SMAW and the welds were produced using a Nickel-Buttering by a pure Nickel electrode(ENi1) on Cast Iron side, then by 4 types of filler materials the joints were produced; Ni-base electrode(Ni1), E308 and E309 Austenitic stainless steel electrodes and E7018 electrode. The preheat temperature of Cast Iron has been selected to be 250○ and 500 ○C to avoid crack of weldments. The comparative evaluation was based on metallography, chemical composition, hardness and corrosion behavior on two different preheat temperatures. According to metallography, the best... 

Fluidized bed spray granulation is an important powder production process with several key advantages compared to other powder production processes, such as spray drying. Moreover, in fluidized bed granulators, whole process takes place in just one apparatus and there is no need to side processing. Most important characteristics and essential part of fluidized bed granulation is the wetting of primary particles by atomized liquid binder to coating the primary particles and producing granules. To date, a lot of research has focused on modeling and understanding of the separate particle growth mechanisms which have been integrated into the population balance models. Although, these concepts... 

Permeability is an essential parameter used for reservoir evaluation, simulation and management to optimize oil recovery. The conventional approach to estimate reservoir connectivity, conductivity, sweep efficiency and other critical information for decision-making is to build detailed geological models, which are then upscaled to a coarser grid where flow simulations are run. However, this takes many hours to be carried out even for a single realization practically. In practice, a very small number of realizations are considered and consequently the true uncertainty in the results is very poorly estimated. In this study, a statistical model of isotropic overlying sandbodies is used to... 

Metabonomics is a quantitative measurement of time dependent metabolic interactions for living systems in response to the pathological or genetic variations. NMR spectroscopy has emerged as a key tool for understanding metabolic processes in living systems. In this project, the study of metabolomics was performed as classification and regression on samples of parkinson’s disease, multiple sclerosis disease, celiac disease and crohn’s disease. In classification part, various methods were applied using optimal parameters.classification methods in Parkinson’s disease, multiple sclerosis disease, celiac disease and crohn’s disease were RF, CART, PLS-DA, RF and RF respectively. Based on the... 

Gravity dams are solid concrete structures that maintain their stability against design loads from the geometric shape and the mass and strength of the concrete. Because of their critical role in supplying portable and agricultural water and problems which would happen if they broke, it is required to consider their stability and keep them in safe conditions. They should be able to continue their function after a disaster such as earthquake. But most of them are aged dams with some have been built near faults. Indeed, there are some concerns regarding the performance of these dams under the effect of seismic loads. This research deals with performance evaluation of concerete gravity . The... 

Soil nailing is an in-situ technique of mechanically stabilizing soil masses which has been used in France, Germany, United states, and recently in Iran. A review of literature shows that Soil-Nailed walls have performed well during strong ground motions in comparison with the gravity retaining structures. After the 1989 Loma Prieta earthquake, minor signs of distress or corresponding deformation were found on the Soil-Nailed walls, indicating excellent performance of such structures during moderate and strong shakings. These observations indicate that Soil-Nailed walls have an inherent satisfactory seismic response. This has been attributed to the intrinsic flexibility of the Soil-Nailed... 

In nature, there are types of soils that when goinging under stress at constant moisture, or increase of moisture at constant stress, or change of both characters, they show a sudden and high level decrease in their volume. These type of soils are named as Collapsible soils. Iran is one of the countries that at some parts of its land collapsible soils are found. In this research by using of laboratory equipments, the volume change behavior of collapsible loess soils of Gorgan plain (North of Iran) is evaluated under increase of water content and inundation stress. In these experiments, the usual odeometer cell has been used for exploring the behaviour of collapsibility and volume change of... 

Collapsible soils such as loess, which are naturally found unsaturated, are kind of problematic soils that undergo sudden and noticeable decrease in volume under increasing stress at constant moisture, increasing moisture at constant stress, or increase in both of them. This kind of soil can be found in some parts of Iran such as plain of Gorgan. To fulfill the main purpose of this study, evaluating the effect of cementation on collapse behavior of loess of Gorgan, some oedometer tests under controlled matric suction were performed on reconstituted samples without and with lime. The lime was added for stabilizing of the collapsible materials and the amount was chosen to be %3 by weight of... 

Accurate prediction of relative permeability for various reservoir rocks at various saturation conditions has been of concern for a long time in petroleum industry. Relative permeability is known as one of the most significant parameters in simulation of actual multi-phase flow through porous media during life-time of a hydrocarbon reservoir. In addition, it plays important role in oil production and well completion. Direct experimental measurement in order to determine relative permeability of porous rock has long been recorded in petroleum related literature. However, empirical methods for determining relative permeability are becoming more widely used, particularly with the advent of... 

The concept of generalized strains is a well-established subject in the classical continuum mechanics. The characteristics and various applications of the generalized strains have been the point of interest of many researchers in the classical continuum mechanics. The aim of this thesis is the introduction of generalized strains in the micropolar theory, as a non-classical continuum theory. A set of generalized strains is suggested for the deformation of macro-elements. Moreover, a set of generalized strains is proposed for the micro-structures. Since the rate of strains possesses a significant importance in the constitutive equations of nonlinear analysis of solids, expressions for the rate... 

Collapsible soils are kinds of problematic soils which are susceptible to large and sudden reduction in volume upon wetting. A manifest kind of these soils is loess; catastrophic settlement of structures which are built upon it has been observed when the soil becomes wet. In this investigation the collapse potential of samples of loess taken from Gorgan, Golestan, Iran, has been studied by using unsaturated odometer tests under controlled matric suction. To this end, two modified odometer apparatus with the capability of controlling the matric suction, have been designed and developed. Undisturbed samples of soil have been tested under K0 condition, while the matric suction, volumetric... 

Concrete gravity dams are one of the most important infrastructures therefore their performance under seismic load is an important issue of concern for dam owners. It is necessary that these infrastructures to be able to continue their function after a disaster such as earthquake, as any damage can cause huge cost. For analysis of dams linear and nonlinear analyses are used. Because even operating loads will create cracks in the body of the dam, dam behavior can not always be considered linear. It is remarkable that these surface cracks can join together under seismic loads and this question the safety of dams. It is important to note that nonlinear analysis of concrete gravity dams is...