Sharif Digital Repository

In this paper, the performance of a novel HDH solar desalination system equipped with a combination of heat pipe (HP), evacuated tube collector (ETC) and air bubble column humidifier is experimentally investigated. This novel HDH system uses advantages of ETC-HP as a highly efficient thermal absorption and conductor device, and at the same time employs the advantages of an air bubble column humidifier, i.e. high interface area and effective mixing in order to heat the water and humidify the air, respectively. The effects of various parameters including incoming air flow rate into the humidifier, initial depth of water in the humidifier, and adding fluids such as oil and water in the space... 

Image fusion means to integrate information from one image to another image. Medical images according to the nature of the images are divided into structural (such as CT and MRI) and functional (such as SPECT, PET). This article fused MRI and PET images and the purpose is adding structural information from MRI to functional information of PET images. The images decomposed with Nonsubsampled Contourlet Transform and then two images were fused with applying fusion rules. The coefficients of the low frequency band are combined by a maximal energy rule and coefficients of the high frequency bands are combined by a maximal variance rule. Finally, visual and quantitative criteria were used to... 

Echocardiography as a common place device has been widely used for diagnosis. Segmentation of left ventricle just using the standard level set formulation based on the magnitude of intensity cannot restrict the contour evolution completely due to the lack of sharp edges. This paper aims to introduce a robust method for segmentation of three-dimensional echocardiography images based on two boundary maps namely distance map and probabilistic map as stopping criteria of contour evolution which are extracted using two different approaches. The distance map is extracted by applying Free Form Deformation (FFD) method on manually determined landmarks of initial spherical volume to register the... 

In this paper, an efficient approach for ultrasonic object segmentation with special application for left ventricle segmentation in echocardiography images is proposed. At first, an efficient hybrid trend for ultrasonic image edge detection is suggested. Then, a modified level set approach is introduced based on the extracted edges and the computed probabilistic map as the stopping criteria for the contour evolution. Both synthetic and clinical images are utilized as validation measures with respect to the prior techniques which indicate outperform results quantitatively and qualitatively. Left ventricle segmentation using proposed method illustrates expert-approved performance, providing a... 

The substitution of conventional mathematical models with fast and accurate modeling tools can result in the further development of desalination technologies and tackling the need for freshwater. Due to the great capability of data-driven methods in analyzing complex systems, several attempts have been made to study various desalination systems using data-driven approaches. In this state-of-the-art review, the application of various artificial intelligence and design of experiment data-driven methods for analyzing different desalination technologies have been thoroughly investigated. According to the applications of data-driven methods in the field of desalination, the reviewed... 

Automatic extraction of the varying regions of magnetic resonance images is required as a prior step in a diagnostic intelligent system. The sparsest representation and high-dimensional feature are provided based on learned dictionary. The classification is done by employing the technique that computes the reconstruction error locally and non-locally of each pixel. The acquired results from the real and simulated images are superior to the best MRI segmentation method with regard to the stability advantages. In addition, it is segmented exactly through a formula taken from the distance and sparse factors. Also, it is done automatically taking sparse factor in unsupervised clustering methods... 

Sparse representation is a powerful tool for image processing, including noise removal. It is an effective method for Gaussian noise removal by taking advantage of a fixed and learned dictionary. In this study, the variable distribution of Rician noise is reduced in magnetic resonance (MR) images by sparse representation based on reconstruction error sets. Standard deviation of Gaussian noise is used to find these errors locally. The proposed method represents two formulas for local error calculation using standard deviation of noise. The acquired results from the real and simulated images are comparable, and in some cases, better than the best Rician noise removal method due to the... 

A novel combined power and refrigeration cycle is introduced and analyzed from the thermodynamic standpoint. The proposed cycle is an integration of a Kalina cycle equipped with an ejector (EKalina) and an ejector refrigeration cycle (ERC). In order to enhance the overall cycle performance, the possibility of employing two-phase ejectors in combined power and refrigeration cycles is studied. A parametric analysis is conducted to investigate the effects of the key thermodynamic parameters namely turbine inlet pressure, split ratio, basic ammonia concentration, heat source and evaporator temperatures on the cycle performance. The developed model is also verified with available data and it is... 

The isomerization of D-glucose to D-fructose using the immobilized glucose isomerase, as a typical model system of solid-liquid enzyme reactions has been carried out in a novel type of two-impinging-jets reactor (TIJR), which is characterized by a rotating inner cylinder in a stationary one. Because of the impinging process, turbulence, and complex trajectory of the solid particles within the reactor, the fractional conversion of glucose obtained in the TIJR increased dramatically compared to that obtained by conventional reaction systems. A compartment model was considered to describe the pattern of flow [residence time distribution (RTD) of solid particles] within the TIJR. Considering... 

In this article, the problem of simultaneous heat, mass, and momentum transfer in the developing region of tubular reactors with homogeneous chemical reaction and laminar power-law fluid flow under unsteady-state conditions has been solved. In this regard, the general governing equations were solved using finite-difference method and analyzed carefully. Moreover, the influences of various parameters and dimensionless numbers such as power-law index, heat of reaction, reaction order, and Damköhler number value on the numerical results were investigated. In addition, the numerical results obtained for the fully-developed velocity distribution of Newtonian fluid flow and Sherwood number value... 

This paper presents the results obtained and the deductions made from a series of microstructural studies and mechanical tests involving gray cast iron which was sand cast using a variety of modules. The effect of cooling rate on the primary dendrite arm spacing (DAS), secondary dendrite arm spacing (SDAS), thickness of ferrite-cementite layer (λe) and the hardness (HB) were evaluated. Results show that the both DAS and SDAS and also λe are highly dependent on the cooling rate, and they decreases as the cooling rate increases. More attempts were also done to correlate the HB with DAS, SDAS and λe. It was found that HB increases as DAS, SDAS and λe decreases  

Performance of a small-scale trigeneration system driven by low-temperature geothermal sources for producing fresh water, heating (hot water) and electricity is investigated from thermodynamic and economic standpoints. This system, utilizing a single stage absorption heat transformer leads to an increase in heat source temperature to be used in single stage evaporation desalination process and also providing water heating. Furthermore, an organic Rankine cycle is used for electric power generation. The developed model is validated with available data and effects of decision variables namely geothermal source, absorber and condenser temperatures on energy and exergy efficiencies of the... 

A new nonlinear Time to Digital Converter (TDC) based on time difference amplification is the proposed. A new gain compensation method is presented to expand the DR of conventional × 2 Time Amplifiers (TAs). Instead of conventional gain compensation approach based on changing strength of current sources, the proposed technique uses current difference which results more stable gain over wider DR. In order to avoid two different paths of the stages, a sign bit detection part is the proposed at the front of the TDC to allow using one path of stages for both positive and negative input time differences. As a result, the most advantages of the proposed TDC are its high resolution, wide DR, and... 

This paper presents a new low-power reduced comparator flash ADC. The proposed ADC uses dynamic comparators to perform a high-speed low-power conversion. In order to reduce offset and kick-back noise effect of conventional dynamic comparators, a new comparator with a higher pre-amplifier gain along with the mathematical analysis is presented. The proposed 4bit ADC is simulated in 0.18um with 1.8-υ supply voltage. SNDR and SFDR of the ADC are 23dB and 26.5dB, respectively. The ADC consumes only 0.95mw at the sampling rate of 400MS/s. © 2017 IEEE  

Time amplifiers (TAs) are the key building blocks of the two-step time-to-digital converters. High resolution TAs suffer from inaccuracy the gain due to employing meta-stability behavior of the SR latches. In the proposed method, two offset NAND gates are placed in parallel with the NAND gates of the conventional SR latch to get a linear re-configurable gain. Gain of the TA is controlled only by the driving strength of the NAND gates. To confirm the effectiveness of the proposed method, an 8-bit two step time to digital converter (TDC) was designed and laid-out in 0.18- μm CMOS technology. Using a supply voltage of 1.2 V, the proposed TDC consumes 1.1 mW at 30 MS/s throughput. © 2004-2012... 

Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied. To investigate the microstructure and mechanical properties, optical microscopy, scanning electron microscopy, X-ray diffraction, tensile test, and hardness test were used. The results show that the solution-annealing treatment in the cold-rolled steel redounds to the formation of submicrocrystalline Fe2 (Mo, Ti) Laves phase particles, which are stable at high temperatures. These secondary Laves phase particles prevent from recrystallization at high temperatures and correspond to semi-brittle fracture in the subsequent aging treatment