Sharif Digital Repository

The isomerization of D-glucose to D-fructose using the immobilized glucose isomerase, as a typical model system of solid-liquid enzyme reactions has been carried out in a novel type of two-impinging-jets reactor (TIJR), which is characterized by a rotating inner cylinder in a stationary one. Because of the impinging process, turbulence, and complex trajectory of the solid particles within the reactor, the fractional conversion of glucose obtained in the TIJR increased dramatically compared to that obtained by conventional reaction systems. A compartment model was considered to describe the pattern of flow [residence time distribution (RTD) of solid particles] within the TIJR. Considering... 

In this article, the problem of simultaneous heat, mass, and momentum transfer in the developing region of tubular reactors with homogeneous chemical reaction and laminar power-law fluid flow under unsteady-state conditions has been solved. In this regard, the general governing equations were solved using finite-difference method and analyzed carefully. Moreover, the influences of various parameters and dimensionless numbers such as power-law index, heat of reaction, reaction order, and Damköhler number value on the numerical results were investigated. In addition, the numerical results obtained for the fully-developed velocity distribution of Newtonian fluid flow and Sherwood number value... 

This paper studies simultaneous lot sizing and scheduling problem in a job shop environment over a finite number of periods. The machines are flexible such that the production manager is able to change their working speeds. Also, the production schedule of the items over machines should be in consistence with technological precedence relationships. The problem is formulated as an integer linear program. Then, a number of valid inequalities are developed based on the problem structures. The proposed valid inequalities are added to the problem formulation in a "cut and branch" manner to accelerate the search process by common solvers. Finally, performance of the valid inequalities is... 

A thermo-elastic analysis coupled with a phase change model is employed to evaluate thermal stresses as well as progress of austenite decomposition after hot strip rolling operations. The thermo-mechanical finite element analysis is utilized to assess the distributions of temperature and thermal stresses during cooling while at the same time, a model based on the additivity rule is used to determine the rate of austenite to ferrite decomposition. The proposed model is applicable to multi-pass rolling schedules while the effects of different process parameters including the rolling speed and cooling configuration of the run-out table can be taken into account. In order to verify the... 

A major problem in a multiple output converter structure is the different power flow via its various outputs. This problem leads to unwanted input DC-link voltage. This paper studies full bridge based DC-DC converters with multiple outputs. The effect of power flow variation is studied and a regenerative converter topology which controls the DC-link voltage by space voltage vector modulation technique is proposed. The proposed converter has a fast response to control the DC-link voltage in an acceptable band. Simulation and experimental results are presented to verify the analytical studies. © 2018 IEEE  

After several decades of work by several talented researchers, estimation of the origin–destination matrix using traffic data has remained very challenging. This paper presents a set of innovative methods for estimation of the origin–destination matrix of large-scale networks, using vehicle counts on links, partial path data obtained from an automated vehicle identification system, and combinations of both data. These innovative methods are used to solve three origin–destination matrix estimation models. The first model is an extension of Spiess’s model which uses vehicle count data while the second model is an extension of Jamali’s model and it uses partial path data. The third model is a... 

Fractional-pixel accuracy Motion Estimation (ME) has been shown to result in higher quality reconstructed image sequences in hybrid video coding systems. However, the higher quality is achieved by notably increased Motion Field (MF) bitrate and more complex computations. In this paper, new half-pixel block matching ME algorithms are proposed to improve the rate-distortion characteristics of low bitrate video communications. The proposed methods tend to decrease the required video bandwidth, while improving the motion compensation quality. The key idea is to put a deeper focus on the search origin of the ME process, based on center-bias characteristics of low bitrate video MFs. To employ the... 

Motion estimation at fractional-pixel accuracy results in higher quality video sequences. However, the higher quality is achieved by more computations and increased required motion field bitrates. In this paper, new half-pixel accuracy block matching-based motion estimation algorithms are proposed to improve the rate-distortion characteristics of low-bitrate video communications. The proposed methods especially tend to decrease the required video bandwidth, with no degradation in quality of reconstructed image sequences. The key idea is to put a deeper focus on the origin (zero motion) based on the center-bias characteristics of low bitrate video motion fields. The experimental results show... 

Motion estimation and compensation is an essential part of existing video coding systems. Compared to the widely used block-matching algorithms (BMA), the mesh-based motion estimation (MME) produces better subjective and objective qualified image sequences in many cases, especially at low bitrates. However, the iterative refinement step of the MME is computationally too expensive. In this paper, we propose a fast MME scheme, which adjusts its interpolation patterns to the motion features of image sequences to achieve higher quality reconstructed results. Experimental results show notable rate-distortion improvement over both the BMA and the conventional non-iterative MME schemes, especially... 

A new nonlinear Time to Digital Converter (TDC) based on time difference amplification is the proposed. A new gain compensation method is presented to expand the DR of conventional × 2 Time Amplifiers (TAs). Instead of conventional gain compensation approach based on changing strength of current sources, the proposed technique uses current difference which results more stable gain over wider DR. In order to avoid two different paths of the stages, a sign bit detection part is the proposed at the front of the TDC to allow using one path of stages for both positive and negative input time differences. As a result, the most advantages of the proposed TDC are its high resolution, wide DR, and... 

This paper presents a new low-power reduced comparator flash ADC. The proposed ADC uses dynamic comparators to perform a high-speed low-power conversion. In order to reduce offset and kick-back noise effect of conventional dynamic comparators, a new comparator with a higher pre-amplifier gain along with the mathematical analysis is presented. The proposed 4bit ADC is simulated in 0.18um with 1.8-υ supply voltage. SNDR and SFDR of the ADC are 23dB and 26.5dB, respectively. The ADC consumes only 0.95mw at the sampling rate of 400MS/s. © 2017 IEEE  

Time amplifiers (TAs) are the key building blocks of the two-step time-to-digital converters. High resolution TAs suffer from inaccuracy the gain due to employing meta-stability behavior of the SR latches. In the proposed method, two offset NAND gates are placed in parallel with the NAND gates of the conventional SR latch to get a linear re-configurable gain. Gain of the TA is controlled only by the driving strength of the NAND gates. To confirm the effectiveness of the proposed method, an 8-bit two step time to digital converter (TDC) was designed and laid-out in 0.18- μm CMOS technology. Using a supply voltage of 1.2 V, the proposed TDC consumes 1.1 mW at 30 MS/s throughput. © 2004-2012... 

In this study, a chemometric strategy was developed for analysis of gas chromatographic (GC) and infrared spectroscopic (FT-IR) fingerprints of nine crude oil samples from the main oil wells of Iran to classify them and to find their origins. In this regard, a fractionation method based on saturated, aromatic, resin, and asphaltene (SARA) test was used. Then, these fractions were analyzed by GC-FID and GC–MS. Also, nine crude oil samples were analyzed by FT-IR. The obtained GC fingerprints were aligned using correlation optimized warping (COW) and auto-scaled, and then analyzed using principal component analysis (PCA) and hierarchical cluster analysis (HCA). Evaluation of PCA scores plot... 

In the present contribution, visible-near infrared hyperspectral imaging (Vis-NIR-HSI) combined with a novel chemometric approach based on mean-filed independent component analysis (MF-ICA) followed by multivariate classification techniques is proposed for saffron authentication and adulteration detection. First, MF-ICA was used to exploit pure spatial and spectral profiles of the components. Then, principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to find patterns of authentic samples based on their distribution maps. Then, detection of five common plant-derived adulterants of saffron including safflower, saffron style, calendula, rubia and turmeric were...