Sharif Digital Repository

In this paper, the dynamic instability of a nonlinear system has been studied using the stochastic vibration analysis and employing statistical properties of the system response. In this method neither the time domain analysis nor limit cycle oscillations were used. A two degrees-of-freedom airfoil subjected to an aerodynamic quasi-steady flow with a nonlinear torsional spring was considered as the case study. The spring nonlinearity was examined in hardening and softening states. A random force in the form of the white noise with Gaussian function was added to the aerodynamic lift force. The statistical linearization and random vibration analysis were applied to the nonlinear system to... 

In this paper, designing of the LQR controller and observer with intelligent tools for the triple inverted pendulum is investigated. Intelligent tools are considered as GA and GA-PSO optimization algorithms and fuzzy logic to qualify achieving LQR gains. The pendulum is swung up from the vertical position to the unstable position. The rules for the controlled swing up are heuristically achieved such that each swing results are controlled. The inverted pendulum and cart system are modeled and constructed their equation based on energy method. Also, the performances of the proposed fuzzy logic controller, GA and GA-PSO tuning LQR gains are investigated and compared. Simulation results show... 

The influence of the addition of the nonionic surfactants C12DMPO, C14DMPO, C10OH, and C10EO5 at concentrations between 10-5 and 10-1 mmol/L to solutions of β-casein (BCS) and β-lactoglobulin (BLG) at a fixed concentration of 10-5 mmol/L on the dilational surface rheology is studied. A maximum in the viscoelasticity modulus |E| occurs at very low surfactant concentrations (10-4 to 10-3 mmol/L) for mixtures of BCS with C12DMPO and C14DMPO and for mixtures of BLG with C10EO5, while for mixture of BCS with C10EO5 the value of |E| only slightly increased. The |E| values... 

This paper presents synthesis and photophysical investigation of a very rare type of the ReI diimine complexes, [Re(diimine)(CO)3(OPR3)]+, R = Ph, Cy; diimine – phenanthroline and neocuproine, containing monodentate (unsupported) phosphine oxide ligands. The obtained compounds have been structurally characterized in solid phase by using XRD crystallography, which revealed unusual distortions in the pseudo octahedral rhenium environment, which may be ascribed to intramolecular interligand (phosphine oxide – diimine) interaction rather than to crystal packing effect. Optimization of the ground state structure of these molecules with the DFT method also confirmed intramolecular origin of the... 

In the present work we obtained a series of NIR luminescent platinum(II) complexes with a pincer N^N^C ligand based on the conjugated {benzoimidazo[1,2-a]pyrazine} system with the [Pt(N^N^C)L]n+ structural motif (L = phosphine, alkynyl or pyridine-type ligands). We have also synthesized two complexes with bidentate phosphines that demonstrate different types of coordination: 1) as chelating ligand (in case of 1,2-bis(diphenylphosphino)benzene), that led to de-coordination of pyridine ring of N^N^C ligand and formation of a [Pt(N^C)dppb]+ complex; 2) as a bridging ligand (in case of bis(diphenylphosphino)methane) between two {Pt(N^N^C)} fragments in a dimeric complex of type... 

Most of the energy efficient routing algorithms proposed for sensor networks are reactive routing algorithms. By definition, reactive algorithms are those in which routes are constructed whenever there is data transmission. In such algorithms, to transmit data packets from a certain transmitter to the corresponding receiver, efficient route will be constructed using RREQ delivery. This delivery is performed via flooding and modified flooding algorithms. One of the most important criteria of such flooding algorithm is not to miss the best final route during RREQ delivery. Most of major algorithms ignored this fact and instead tried to minimize energy consumption during flooding algorithm. But... 

In a SEnsor Network with Mobile Agents (SENMA) is an architecture proposed for large scale sensor networks. In sensor networks, a fraction of the packets generated by only part of the sensors is sufficient to provide a good estimation of all network information. SENMA uses this inherent redundancy. However, the performance of such system is limited by estimation errors and packet errors due to collision. Estimation error is a major problem in applications such as habitat monitoring in which information is a function of node position. In this paper, we first derive the equations of distortion in a general scenario and use this model to compare the estimation error for regular networks. Then... 

With modified measuring procedure and measuring cell design in the drop profile tensiometer PAT, it became possible to study the rate of water evaporation through adsorbed or spread surface layers. This method was employed to measure the rate of water evaporation from drops covered by adsorbed layers of some proteins and surfactants, in particular n-dodecanol. It was shown that the formation of dense (double or condensed) adsorbed layers of protein and the formation of 2D-condensed n-dodecanol layer decrease the water evaporation rate by 20-25% as compared with pure water. At the same time, the adsorbed layers of ordinary surfactants (sodium dodecyl sulfate and nonionic ethoxylated... 

Background: Type-2 diabetes mellitus is characterized by insulin resistance and impaired insulin secretion in the human body. Many endeavors have been made in terms of controlling and reducing blood glucose via the medium of automated controlling tools to increase precision and efficiency and reduce human error. Recently, reinforcement learning algorithms are proved to be powerful in the field of intelligent control, which was the motivation for the current study. Methods: For the first time, a reinforcement algorithm called normalized advantage function (NAF) algorithm has been applied as a model-free reinforcement learning method to regulate the blood glucose level of type-2 diabetic... 

Perovskite solar cells have been constructed under the standard procedure by employing soluble tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material. Solution processed device construction was carried out under ambient conditions of 50–60% ambient humidity. Triphenylamine substitution played the double role of imparting solubility to the core metal phthalocyanine as well as to introduce electron-rich ligands, which could enhance the role of Zn phthalocyanine as hole transporter. Indeed, the obtained material was functional. The present data highlight tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material but also highlight the importance of... 

A recent scheme for perfect transmission of quantum states through quasi-one-dimensional chains requires application of global control at regular intervals of time. We study the effect of stochastic noise in this control and find that the scheme is robust for reasonable values of disorder. Both uncorrelated and correlated noise in the external control are studied, and it is remarkably found that the efficiency of the protocol is much higher in the presence of correlated noise  

This article presents a novel armchair graphene nanoribbon (AGNR) field-effect transistor with engineered nanopores for resonant tunneling. Two rectangular nanopores are punched to create two potential barriers and one quantum well. Channel and source and drain contacts are AGNR, indicating structure homogeneity. Nonequilibrium Green's function and Poisson's equations are used for structural analysis. The input variables are well width (WW), drain voltage (VD), and barrier width (BW). The effects of repositioning nanopores and AGNR type (i.e., semiconductor and semimetal) are also studied. The impact of the parameters on the density of states, transmission probabilities, peak current (IP)... 

Although evaporative coolers consume much lower electricity than the vapor compression systems, they are not applicable in humid climates. Combination of desiccant wheels and evaporative coolers, known as desiccant-based evaporative cooling systems, allows evaporative coolers to be used in humid climates, which provide significant energy and environmental advantages with respect to vapor compression systems. However, one of the main disadvantages of evaporative cooling is the high water. Regarding the global water crisis, a cooling system which saves both water and energy will be an attractive alternative to the current cooling systems. To this aim, this paper presents a novel... 

We investigate the dynamics of an initially disentangled Gaussian state on a general finite symmetric graph. As concrete examples we obtain properties of this dynamics on mean field graphs (also called fully connected or complete graphs) of arbitrary sizes. In the same way that chains can be used for transmitting entanglement by their natural dynamics, these graphs can be used to store entanglement. We also consider two kinds of regular polyhedron which show interesting features of entanglement sharing. © 2006 Elsevier B.V. All rights reserved  

The immense space of composition-processing parameters leads to numerous trial-and-error experimental works for engineering of novel bulk metallic glasses (BMGs). To tackle this challenging problem, it is required to consider specific guidelines which are able to restrict the productive alloying compositions. In this work, a correlation-based neural network (CBNN) approach was developed, based on a dataset of 7950 alloying compositions, to design potential new MGs through prediction of casting ability, reduced glass transition (Trg) and critical thickness (Dmax). This approach involves individual and mutual characteristics of contributory factors to improve the prediction accuracy. To... 

The adsorption of proteins at liquid interfaces happens at rather low bulk concentrations due to their rather high surface activity. In contrast typical surfactants start to decrease the surface tension at bulk concentration in the range of mmol/l and reach a minimum value at about two or three orders of magnitude higher concentration. The two proteins studied here, β-lactoglobulin and β-casein, adsorb already remarkably at much lower concentrations, i.e. less than 1. μmol/l. When smallest amounts of a non-ionic surfactant are added to low concentrated protein solutions, changes in the surface tension are observed which cannot be explained by the existing theoretical models. An agreement... 

An appropriate combination of the thin-layer Navier-Stokes (TLNS) and parabolized Navier-Stokes (PNS) solvers is used to accurately and efficiently compute hypersonic transitional/turbulent flowfields of perfect gas and equilibrium air around blunt-body configurations. The TLNS equations are solved in the nose region to provide the initial data plane needed for the solution of the PNS equations. Then the PNS equations are employed to efficiently compute the flowfield for the afterbody region by using a space marching technique. Both the TLNS and the PNS equations are numerically solved by using the implicit non-iterative finite-difference algorithm of Beam and Warming. A shock fitting... 

This study mainly aims to investigate the effect of reformer gas (RG) addition on the performance of homogeneous charge compression ignition (HCCI) engines using a multi zone model. The developed model is validated using a wide range of experimental data of a cooperative fuel research engine. Blended fuels of isooctane and n-heptane, known as primary reference fuels, with different octane numbers are used as the main engine fuel. A semi detailed chemical-kinetic mechanism containing 101 species and 594 reactions is used to simulate the combustion of blended fuels. The study is performed with different percentages of RG (0–30%). The results show that RG reduces the rate of some H abstraction... 

Retention of lead(II) ions on a polyamide nanofiltration membrane was investigated. Effects of different factors including operating pressure, lead ion concentration, anion nature, pH and composition of feed on the lead ion rejection were studied. The solutions used consisted of Pb(NO3)2, PbCl2 and PbSO4 in the single-salt solution system and Pb(NO3)2, Cu(NO3)2, Zn(NO3)2, Cd(NO3)2, NaNO3 and NH4NO3 in the binary-salt solution system. The influence of divalent and monovalent cations including cadmium, copper, zinc, sodium and ammonium on the rejection of lead ion was examined. The transmembrane pressure and lead ion concentration varied between 10 and 40bar and 20 and 400mg Pb2+/L,...