Sharif Digital Repository

Karun 4 arch concrete dam with a height of 230 meters is designed and built in one of the most complex natural places. Therefore, monitoring the behavior and evaluating the safety and stability of this dam, both with regard to the height and nature of the dam itself and with regard to its national and international dimensions, is of special importance and sensitivity. This sensitivity is doubled due to some problems and issues encountered in the body of the Karun 4 dam, which of course are considered probable and possible phenomena in arch concrete dams. The Karun 4 Dam construction site is located in the southwest of Iran on the Karun River, immediately upstream of the Karun 3 Dam reservoir... 

The problem of science-religion relation is considered here, considering realism and the cognitive status of religious statements and accepting the existence of common issues between science and religion. Different approaches have been adopted to explain this relation. One of the approaches which have been proposed in recent years has been the issue of religious science, which is considered to solve incompatible issues between science and religion. The possibility of religious science is one of the important problems that have attracted the mind of some Muslim scholars and some devoted Muslims. Some motivation could be mentioned for bringing in this issue, like the removal of conflict... 

It seems that ship scraping industries is a part of economic of under developing countries because in this business the amount of investment and cost is little but benefit is high.Also it can be assume as an important part of marine and supplier for steel industries. The owners of ships and oil carriers save their money by scrapping the aged ships and renewing their marine transportation vehicles and the other benefit is reducing the environmental pollution. This business creating a large amount of job opportunity for workers, for environmental view it could be found that by scrapping the ships and producing scrap steel “which is the most important output of these factories” the mineral work... 

Selective laser sintering is a technique which uses a laser as the power source to sintering some selected points at a bed of powder in order to create a solid structure. In this research the SLS mechanisms of powder deposition is simulated and surface smoothness and layer density created by each mechanism is computed. For this purpose roller, blade and hopper mechanisms are simulated. For this simulation, polyamide 12 (PA2200) which is a common material is used. In this simulation at first powder specifications are extracted according to the references and for particle shape instead of using the spherical particle shape we use a certain shape that is more close to reality which created by... 

Global energy consumption is on a trajectory to surge by 50% by 2050, primarily driven by prevailing energy consumption patterns. Consequently, the imperative to innovate and develop novel energy sources, such as the utilization of recycled waste heat, has become paramount for the foreseeable future. In light of this, this paper delves into the transformative potential of employing Phase Change Materials (PCMs) for cooling Thermoelectric Generators (TEGs) and harnessing waste heat for productive purposes. The research investigates three distinct configurations to evaluate the efficacy of PCMs in enhancing thermal management. Configuration 1 exclusively relies on an active cooling fan, while... 

This study was conducted to investigate a theoretical and experimental two-dimensional model of a floating fish cage in regular waves and uniform current. Due to the inefficiency of computational fluid dynamics (CFD) in solving such problems, developing a simple model to predict the results is highly advantageous. In this study, a simple mass-spring model was developed to simulate the problem. After validating the results of this simple model through a series of model tests in a wave tank, it was further utilized to extract additional results. Experiments were conducted at six different wave heights and four current velocities. In all experiments, wave steepness was maintained at a ratio of... 

Nowadays the issue of recognizing customer’s needs and leading different activities of industrial units to obviate such needs are important concerns and are coined as “Customer Relationship Management” in business literature. What’ s more, with the development of information technology ,creating the possibility to gather, warehouse and analyze huge amount of data quickly, “Data Mining” subject is presented to analysts and experts as a powerful tool. Currently in many aspects of CRM, analysts are considering Data Mining techniques in order to identify customers’ behavior pattern, performance and predict customers’ behavior and to specify their desires based on this pattern. This Thesis is to... 

The search for sustainable and clean energy sources to replace fossil fuels has become one of the most important scientific and technological challenges today due to the threat of fossil fuel shortages and environmental pollution. Therefore, the need for clean energy production and storage resources, including supercapacitors, has increased day by day. Today, supercapacitors have been considered suitable for energy storage due to their high-power density, appropriate energy density, long cycle life, and high safety. The aim of the present study was to obtain activated carbon fabric as electrode material in electrochemical energy storage applications and specifically supercapacitors. The... 

Mechanical behavior of tissue engineering scaffolds plays a key role in their biological performance; however the effect of microstructural features on mechanical behavior of such scaffolds is still under investigation. The objective of this study was to investigate the influence of pore architecture and relative density on mechanical behavior of rapid prototyped scaffolds. In this regard, scaffolds with different cubic, hexagonal and trigonal unit cells were designed. These unit cells were repeated in different arrangements in 3D space to produce different nodal connectivities. The internal dimension of pores varied from 500 to 600 μm. Plastic models of scaffolds then fabricated by 3D... 

In the current research, colloidal stability of two different types of coating on the surface of Superparamagnetic Iron Oxide nanoparticles (SPIONs) was studied. In the first triumph, a dual-layer coating was achieved by utilizing optimum amount of Dextran and different PEG (Poly(ethylene glycol)) concentrations which the weight ratios of iron oxide/PEG were 1/1, 2/1, 4/1, 8/1, and 16/1. Then, the presence of the coating was characterized by XRD, FT-IR, DLS and FE-SEM methods. These results together with the TGA ones revealed that as the concentration of PEG surfactant increases, the thickness of coating increases. Moreover, VSM test was performed to specify the effect of coating on the... 

Considering the widespread applications of amides, synthesis of these compounds is of great importance. The one pot oxidative addition of amines to aldehydes is one of the most simple and appealing approaches to synthesis amides. With the aim of developing a mild and convenient approach towards preparation of amides, numerous methods have been reported for this important process over the past few decades. These improvements have been mostly related to the optimization of reaction conditions and the use of more challenging substrates including diverse derivatives of aldehydes, and also design a novel and effective catalytic systems. Due to the various advantages of supported heterogeneous... 

In recent years, the widespread investigation on multi-transition metal oxides that with two or more transition metal oxides, have been increased rapidly for electrochemical application due to low cost, high conductivity and good electrochemical performance other than single metal oxides. In this project, CuCo2O4 nanoparticles were firstly fabricated by decomposing of CuCo-MOF as the template. The as prepared samples were used to synthesis a new nanocomposite of MoS2 and CuCo2O4. The best ratio of the two component were optimized to prepare the best electrocatalyst for Hydrogen evolution reaction (HER). The structure of prepared nanocomposite were investigated by various techniques such as... 

The integrative supply chain management is one of the main business processes between final consumer and supplier and it is formed by responsibilities such as production, services and information those have added value for customers and beneficiaries. Therefore and as the goal of a chain is maximization of gained value for the factors involved in chain, so, this goal can be more accessible by decreasing transportation (transportation method, tracking, …) and stock costs (conservation, ordering, …). As its purpose, this thesis intends to introduce and increase the options of goods transportation possibilities between retailers’ warehouses and evaluation of its effect on transportation and... 

Fog computing environment consists of several devices which distribute across an arbitrary topology. Each of these devices is capable of carrying out a designated computation simultaneously with other devices. One of the common ways of describing a computation is through the usage of workflows. Workflow is a flexible and formal way of modeling tasks and their requirements for execution. A workflow is essentially a DAG. Therefore, it can model the data dependency between tasks quite accurately. The complex structure of a workflow in conjunction with the homogenous nature of devices in a fog environment makes it difficult to find a resource management algorithm to minimize execution time, used... 

Design and construction of an optical fiber sensor for liquid concentration detection are reported. This sensor operates based on light intensity modulation.Such modulation results from alteration of total internal reflection into partial reflection at the interface. It is well known that the extinction ratio is varied by changing the concentration.In this system,two optical fiber swere used, one transmitting the light source, another acting as the receiving fiber and a glass prism providing the total and partial reflections. The modulated intensity has been measured by using a receiving fiber. During the concentration measurements, when a liquid in a vessel touches the 45° faces of the... 

The ultimate aim of this research is optimizing high- performance Horizontal Axis Wind Turbine (HAWT) associated with using Computational fluid dynamics (CFD) to predict the flow behavior over wind turbine blades. Computational prediction of the flow over wind turbines is a challenging numerical problem because of the complicated aerodynamics and large variation in length scales. Phenomena such as; the unsteady flow, vortex shedding of the blade tips, flow separation, complicated blade geometry due to variable twist and chord and changes in angle of attack, and highly turbulent flow over blade sections makes CFD prediction challenging, as well as interesting. The goal is to gain an in depth... 

This project focuses on the design of fuel drop tanks for airplanes that add minimal drag and positive lift to the flying object. This will obviously effect the stability and dynamic performance of the airplane. To reduce adverse dynamic effects the tank was divided to several segment with a special emptying sequence. The add-on tank has to have no interference with the object existing systems and require minimum structural changes in the object. Several designs were proposed and the one gaining highest marks was selected. The flow field and the dynamic behavior of combined vehicle and drop tanks were studied using FE simulations. The result shows that adding a drop tank with optimized...