Sharif Digital Repository

In nanometer-scale process technologies, the effects of process variations are observed in Multiprocessor System-on-Chips (MPSoC) in terms of variations in frequencies and leakage powers among the processors on the same chip as well as across different chips of the same design. Traditionally, worst-case values are assumed for these parameters and then a deterministic optimization technique is applied to the MPSoC application under design. We show that such worst-case-based approaches are not optimal with the increasing variation observed at system-level, and instead, statistical approaches should be employed. We consider the problem of simultaneously choosing MPSoC architecture and task... 

Corner-case analysis is a well-known technique to cope with occasional deviations occurring during the manufacturing process of semiconductors. However, the increasing amount of process variation in nanometer technologies has made it inevitable to move toward statistical analysis methods, instead of deterministic worst-case-based techniques, at all design levels. We show that by statically considering statistical effects of random and systematic process variation on performance and power consumption of a Multiprocessor System-on-Chip (MPSoC), significant power improvement can be achieved by static software-level optimizations such as task and communication scheduling. Moreover, we analyze... 

Increasing delay and power variation has become a major challenge to designing high performance Multiprocessor System-On-Chips (MPSoC) in deep sub-micron technologies. As a result, a paradigm shift from deterministic to statistical design methodology at all levels of the design hierarchy is inevitable. In this paper, we propose a static variation-aware task scheduling and power mode selection algorithm for MPSoCs. The proposed algorithm is able to maximize the total power yield of the chip under a given performance yield constraint by searching for the optimal task scheduling and power mode selection policy for a specified multiprocessor platform. Experimental results are gathered by... 

Parameter variations reveal themselves as different frequency and leakage powers per instances of the same MPSoC. By the increasing variation with technology scaling, worst-case-based scheduling algorithms result in either increasingly less optimal schedules or otherwise more lost yield. To address this problem, this paper introduces a variationaware task and communication scheduling algorithm for multiprocessor system-on-chip (MPSoC). We consider both delay and leakage power variations during the process of finding the best schedule so that leakier processors are less utilized and can be more frequently put in sleep mode to reduce power. Our algorithm takes advantage of event tables to... 

Delay and leakage power uncertainty caused by process variation has become a challenging problem in deep submicron technologies. In recent years, the designers have developed methods to tackle this problem in many design levels such as high level synthesis and system level synthesis. This paper addresses the problem of variation-aware task scheduling and binding for multiprocessor system-on-chip (MPSoC). We consider both delay and leakage power variations during the process of finding the best schedule so that leakier processors are less utilized and can be more frequently put in sleep mode to reduce power. Our algorithm takes advantage of event tables to accelerate the statistical timing... 

Process variation has already emerged as a major concern in design of multi-processor system on chips (MPSoC). In recent years, there have been several attempts to bring variability awareness into the task scheduling process of embedded MPSoCs to improve performance yield. This study attempts to provide a comparative study of the current variation-aware design-time task and communication scheduling techniques that target embedded MPSoCs. To this end, the authors first use a sign-off variability modelling framework to accurately estimate the frequency distribution of MPSoC components. The task scheduling methods are then compared in terms of both the quality of the final solution and the... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages