Sharif Digital Repository

This paper presents the fuzzy logic computing for the design and implementation of fuel controller for gas turbine engines. For this purpose, a fuzz controller is designed in order to be implemented on an electronic control unit where it is used to drive a servo operated fuel control valve. The fuzzy logic computing approach for different parts of the controller including fuzzification, rule base, inference engine and defuzzification are then described. Finally, computer simulation of the fuzzy controllers integrated with the engine model is performed to investigate the effectiveness of the proposed fuzzy controller on the performance of a turbojet engine. The results are provided to show... 

The graphitic carbon nitride/tin oxide (g-C3N4/SnO2) nanocomposite synthesized under microwave irradiation was used for adsorptive removal of sulfur-containing dibenzothiophene (DBT) from Tehran vehicular gasoline. High-resolution transmission electron microscopy, X-ray powder diffraction, energy dispersive X-ray spectroscopy, Brunauer-Emmett-Teller, Fourier-transform infrared spectroscopy, and field emission scanning electron microscopy techniques determined the adsorbent characteristics, and gas chromatography with a flame ionization detector determined the DBT concentration of the samples. Application of the experimental data into the solid/fluid kinetic models indicated a chemisorption... 

Neural activity is very important source for data mining and can be used as a control signal for brain-computer interfaces (BCIs). Particularly, Magnetic signals of neurons are enriched with information about the movement of different part of the body such as wrist movement. In this paper, we use MEG (Magneto encephalography) signals of two subjects recorded during wrist movement task in four directions. Data were prepared for BCI competition 2008 for multiclass classification. Our approach for this classification problem consists of PCA as a noise reduction method, ULDA for feature reduction and various linear classifiers such as Bayesian, KNN and SVM. Final results (58%-62% for subject 1... 

Cascaded split-source inverter (CSSI) is a new single-stage modular multilevel topology. Each cell of this converter converts dc to ac power in the buck or boost operation mode without any additional power switch. This article develops a design method based on a detailed model for CSSI. This model shows that energy storage elements experience double-fundamental frequency ripples besides high-frequency ones. It accurately calculates voltage gains and capacitor voltage and inductor current ripples. On the other hand, common carrier-based multilevel modulations have been modified in terms of both reference and carrier signals to control the inverter under symmetric and asymmetric conditions.... 

An improved version of the V2f turbulence model has been examined in this paper. The objective was to overcome the convergence problem encountered in the original V2f model. The convergence problem is due to the commonly-used wall boundary condition, which therefore has been modified in the proposed model. To test the soundness of the new model, several two-dimensional cases such as Poiseuille flow, channel flow, and backward-step flow has been analyzed and the results are compared with the standard k - ε model, DNS, and in case of the backward flow problem, also with the original V2f model. Based on the comparison, the new model presents a promising approach both with respect to convergence... 

Carbon nanostructures such as carbon nanotubes (CNTs) and graphene sheets have attracted great attention due to their exceptionally high strength and elastic strain. These extraordinary mechanical properties, however, can be affected by the presence of defects in their structures. When a material contains multiple defects, it is expected that the stress concentration of them superposes if the separation distances of the defects are low, which causes a more reduction of the strength. On the other hand, it is believed that if the defects are far enough such that their affected areas are distinct, their behavior is similar to a material with single defect. In this article, molecular dynamics... 

Cascaded split-source inverter (CSSI) is a new single-stage modular multilevel topology. Each cell of this converter converts DC to AC power in the buck or boost operation mode without any additional power switch. This paper develops a design method based on a detailed model for CSSI. This model shows that energy storage elements experience double-fundamental frequency ripples besides high-frequency ones. It accurately calculates voltage gains and capacitor voltage and inductor current ripples. On the other hand, common carrier-based multilevel modulations have been modified in terms of both reference and carrier signals to control the inverter under symmetric and asymmetric conditions. With... 

A combination of molecular dynamics (MD), continuum elasticity and FEM is used to predict the effect of CNT orientation on the shear modulus of SWCNT-polymer nanocomposites. We first develop a transverse-isotropic elastic model of SWCNTs based on the continuum elasticity and MD to compute the transverse-isotropic elastic constants of SWCNTs. These constants are then used in an FEM-based simulation to investigate the effect of SWCNT alignment on the shear modulus of nanocomposites. Furthermore, shear stress distributions along the nanotube axis and over its cross-sectional area are investigated to study the effect of CNT orientation on the shear load transfer  

Various experimental and theoretical investigations have been carried out to determine the elastic properties of nanotubes in the axial direction. Their behavior in transverse directions, however, has not been well studied. In this paper, a combination of molecular dynamics (MD) and continuum-based elasticity model is used to predict the transverse-isotropic elastic properties of single-walled carbon nanotubes (SWCNTs). From this modeling study, five independent elastic constants of an SWCNT in transverse directions are obtained by analyzing its deformations under four different loading conditions, namely, axial tension, torsion, uniform and non-uniform radial pressure. To find the elastic... 

Study Design.: A descriptive overview of the literature. Objective.: To present a comprehensive descriptive overview of the published papers about epidemiologic features, burden, and current management of low back pain (LBP) in Iran. Summary OF Background Data.: Little is known about the epidemiology, burden, and management of LBP in developing and low- to middle-income countries, such as Iran. Methods.: A literature search was carried out using MEDLINE database to assess existing literature about prevalence, disease burden, impact, and current management of nonspecific LBP in Iran. Results.: Twenty-six articles matched inclusion criteria and included in the study. The findings related to... 

The quality of an architectural design of a software system has a great influence on achieving nonfunctional requirements to the system. Unified Modeling Language (UML), which is the industry standard as a common object oriented modeling language needs a well-defined semantic base for its notation. Integrating formal methods Petri nets (PNs) with object oriented design concepts UML is useful to benefit from the strengths of both approaches. Formalization of the graphical notation enables automated processing and analysis tasks. In this paper we use a method to converting State Diagram to Generalized Stochastic Petri Net (GSPN) and then we derive the embedded Continues Time Markov Chain from... 

STUDY DESIGN. Cross-cultural translation and psychometric testing were performed. OBJECTIVES. To cross-culturally translate the Oswestry Disability Index (ODI), Roland-Morris Disability Questionnaire (RDQ), and Quebec Back Pain Disability Scale (QDS) into Persian, and then investigate the psychometric properties of the Persian versions produced. SUMMARY OF BACKGROUND DATA. To the authors' knowledge, there is no validated instrument to measure functional status in Persian-speaking patients with low back pain (LBP) in Iran. To our knowledge, the widely used back-specific measures, the ODI, RDQ, and QDS, have not been translated and validated for Persian-speaking patients with LBP. METHODS. The... 

STUDY DESIGN.: Cross-sectional validation study to investigate psychometric properties of adapted Persian version of the Scoliosis Research Society-22r (SRS-22r) questionnaire. OBJECTIVES.: To translate the SRS-22r into Persian and to evaluate the internal consistency, reliability, and validity of the Persian SRS-22r. SUMMARY OF BACKGROUND DATA.: The SRS-22r has not been translated and validated for Persian-speaking patients with idiopathic scoliosis. This was to provide a validated instrument to measure health-related quality of life in patients with idiopathic scoliosis in Iran. METHODS.: The translation and cultural adaptation of the original questionnaire were carried out in accordance... 

Cultural adaptation and validation of the Persian version of the Arthritis Measurement Scales 2-Short Form (AIMS2-SF). The translation and cultural adaptation of the original questionnaire was carried out in accordance with published guidelines. Three hundred and fifty consecutive Persian-speaking patients with rheumatoid arthritis (RA) were asked to complete the AIMS2-SF, the Short Form Health Survey (SF-36), and four visual analog scales (VAS) for pain, joint stiffness, and patient's and physician's global assessment to test convergent validity. In addition, 90 randomly selected patients were asked to complete the questionnaire 48 h later for the second time. Moderate to high correlation... 

In this article, a multiscale modeling procedure is implemented to study the effect of interphase on the Young's modulus of CNT/polymer composites. For this purpose, a three-phase RVE is introduced which consists of three components, i.e., a carbon nanotube, an interphase layer, and an outer polymer matrix. The nanotube is modeled at the atomistic scale using molecular structural mechanics. Moreover, three-dimensional elements are employed to model the interphase layer and polymer matrix. The nanotube and polymer matrix are assumed to be bonded by van der Waals interactions based on the Lennard-Jones potential at the interface. Using this Molecular Structural Mechanics/Finite Element... 

In this article, a Molecular Structural Mechanics/Finite Element (MSM/FE) multiscale modeling of carbon nanotube/polymer composites with viscoelastic (VE) polymer matrix is introduced. The nanotube is modeled at the atomistic scale using structural molecular mechanics. The matrix deformation is analyzed by nonlinear finite element method considering VE behavior. The nanotube and matrix are assumed to be bonded by van der Waals interactions based on the Lennard-Jones potential at the interface. Using the MSM/FE multiscale model, we investigate the effect of carbon nanotube (CNT) on the improvement of mechanical stability of the nanocomposite. Also, the buckling behavior of these... 

Carbon nanotube (CNT)-reinforced polymer composites have attracted great attention due to their exceptionally high strength. Their high strength can be affected by the presence of defects in the nanotubes used as reinforcements in practical nanocomposites. In this article, a new three-phase molecular structural mechanics/finite element (MSM/FE) multiscale model is used to study the effect of CNT vacancy defects on the stability of single-wall (SW) CNT-polymer composites. The nanotube is modeled at the atomistic scale using MSM, whereas the interphase layer and polymer matrix are analyzed by the FE method. The nanotube and polymer matrix are assumed to be bonded by van der Waals interactions... 

CNT-reinforced polymer composites have attracted attention due to their exceptional high strength. The high strength can be affected by the presence of defects in the nanotubes used as reinforcements in the practical nanocomposites. In this paper, a Molecular Structural Mechanics / Finite Element (MSM/FE) multiscale modeling is used to study the effect of carbon nanotube geometrical defects on the stability of SWCNT-polymer composites. Here, two types of representative volume elements (RVEs) for these nanocomposites are considered with perfect and defected CNT. These RVEs have the same dimensions. The nanotube is modeled at the atomistic scale using molecular structural mechanics whereas the... 

When a high voltage is applied between two beakers filled with deionized water, a floating bridge of water is formed in between exceeding the length of 2 cm when the beakers are pulled apart. Currently two theories regarding the stability of the floating water bridge exist, one suggesting that the tension caused by electric field in the dielectric medium is holding the bridge and the other suggesting surface tension to be responsible for the vertical equilibrium. We construct experiments in which the electric field and the geometry of the bridge are measured and compared with predictions of theories of the floating water bridge stability. We use a numerical simulation for estimation of the...