Sharif Digital Repository

In this work nanocomposite CNT/polysulfone and CNT/polyethersulfone membranes for membrane contactor application in gas separation were fabricated. The two types of CNTs used for chemical and physical separation of H2S from a mixture of CH4 an H2S, had the outer diameter of 20-30nm and 50-100nm. One of the greatest concerns about using membrane contactors for gas separation applications is the wetting of membranes which consequently leads to decrease in separation performance. The aim of this study is to enhance the hydrophobicity of membranes by mixing hydrophobic carbon nanotubes in the polymeric matrix. The effect of factors like type of the polymer, diameter of the carbon nanotube and... 

External radiotherapy is a major method of treating cancer. In this method, penetrating rays such as X-rays, alpha, beta and gamma emitted from the device are used to treat cancer. In order to emitting rays only to the cancer cells, masks are used to stabilize the patient's body in the right position during the radiotherapy, so that the rays are not emitted to the healthy tissues of the patient's body. In this dissertation, first, different methods of making radiotherapy masks are examined. Next, polycaprolactone is proposed as the main material for making the mask. Due to its low tensile strength, this material alone is not suitable for the intended use. Therefore, the material was cured... 

Today safety is one of the major competition factors in automotive industries . The vehicles of today are more and more dependent on electronic systems , for driving safety and ease on control for the driver . Some systems are more or less standard in vehicles on the market , examples of such systems are ABS , ABC , etc. Despite of the effect of these systems on vehicle dynamics ,because they only control longitudinal dynamics and don't receive any feedback from vehicle lateral behavior , now control systems ,named VDC , have been developed and implemented in advanced vehicles. The operation of such systems is as this that in any time instance they evaluate vehicle dynamical behavior.... 

Entrance of secular science to Muslim societies has made them face a duality. That is because, on the one hand, they like to preserve their religious values; and on the other, prevalence of secular ideas prevents people from being committed to such values. Therefore, some Islamic scholars proposed religious science as opposed to Western secular science as a remedy to this crisis In case of religious science, explanatory model has the highest position, but disagreement over how to combine experimental and religious characteristics has led to different models in this area. One of the explanatory models of religious knowledge is that of Doctor Mehdi Golshani which has received due attention at... 

Due to their unique characteristics, such as drag reduction, anti-fouling, and enhancing condensation, hydrophobic and superhydrophobic surfaces have attracted a lot of attention in the past decades. Since approximately 4% of the fossil fuel usage and 14-19% of the air pollution (including greenhouse gases, sulfur, and so forth) are attributed to naval activities, and the dominant form of drag on vessels is friction, drag reduction will not only reduce the cost and usage of fossil fuels, but it will also have numerous environmental benefits  

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

FGM sheets with component or grain size gradient in their thickness direction provide mechanical and physical gradient properties through ND direction. FGMs are fabricated by various methods including centrifugal casting, powder metallurgy, PVD and CVD,all of which suffer from some shortcomings such as porosity of the products, low rate and high cost of production and restrictions on mass production. In this study, 2 and 4 layered Al matrix FGM sheets containing SiC and Al2O3 powders were fabricated by laminating method of Accumulative Roll Bonding(ARB). Two approaches of stacking were chosen as accumulative coupled roll bonding (ACRB) and (ASRB) for initial roll bonding and subsequent... 

Treatment of Wastewater of textile industries has been always challenging due to the high organic matter which is a suitable substrate for the growth of microorganisms. Also, discharge of wastewater into the open water causes water adsorbing more sunlight, raising water temperature and therefor decreasing dissolved oxygen. In addition, the acidity of wastewater decreases the quality of agricultural soil. Among wastewater treatment methods, biological methods are cheaper, environment friendly, and produce less by product. Among all the microorganism responsible for biological treatment, fungi and enzymes are more applicable. Especially white-rot fungi are the most effective microorganism to... 

Metal matrix composites (MMC) and metal foams (MF) have been the topic of numerous researches during the last decades. The appropriate mechanical and physical properties of these materials make them useful in various industries. In this research, a unique approach is introduced for producing MMCs and MFs in which accumulative roll bonding (ARB) is employed in order to achieve a homogeneous distribution of ceramic particles in the metal matrix. Also, foamed structures can be made by subjecting Al/TiH2 composite to an appropriate annealing heat treatment where TiH2 particles decompose to hydrogen and titanium. In this work, the effect of number of ARB cycles on the size and distribution of... 

This project examines four alternatives such as pipelines, oil injection wells, LNG & GTL in the purpose of Iran gas utilization. In this Project four strategies using cost/benefit analysis are examined. For this purpose, at first the cost of inlet feed gas per Mmbtu are calculated. Then regarding various scenarios of average world gas prices for the following thirty years, the cost & benefit of any way will be counted. Then with the use of energy security, the project will make energy policy. For this purpose, Shannon indicator will be used as one of the most reliable indicators. Due to the of use this indicator, the popular project will be chosen accordingly as a certain amount of gas the... 

Climate change and energy security are key drivers for future energy policy. While energy security has been a pillar of energy policy for about a century, concern about climate change is more recent and is bound to radically change the landscape of energy policy. Policy makers are now under increasing pressure to address these twin challenges: to develop cost-effective policies that will both ensure the security of our energy system and reduce greenhouse gas emissions.
Main Effort in this Project is to construct an integrated model of Iran’s energy system to serve as a policy analysis tool, by which policymakers are able to identify the future effects of a wide range of policies in... 

Dependence of some magnetic properties such as core loss and permeability on temper rolling was studied in this thesis. It is shown that with a proper temper rolling sharper textures are obtained in the electrical steel and the magnetic properties in the longitudinal and traverse directions are improved. By texture analysis, it is shown that because of temper rolling, shear strain on the surface of the sheet is the main factor for abnormal grain growth and shear texture formation on the surface. The result of formation of this texture is enhancement of the {100} intensity and reduction of the {111} intensity, leading to the improvement of the permeability. Temper rolling is always... 

Based on International Energy Agency studies, achievement of 450 ppm CO2-equivalent emission target in global emission means that the CO2 emissions in 2050 must be reduced to %50 of 2005 level, and this implies that a portfolio of emission reduction policies and strategies need to be exploited through current century.
At the present time, Carbon Capture and Storage (CCS) Technology is a dominant strategy among all the long-term carbon abatement strategies in many countries. Nevertheless, its potential as a climate mitigating option will be proved, only if it is implemented in the countries which are developing at a great pace and taking advantage of fossil fuels in order to afford their... 

Lipid membranes are fundamental constituents of cell membranes and are now used in lap-on-a-chip technology. Membranes in living cells contain a significant fraction of proteins, which undergo lateral random movements due to thermal fluctuations and shear forces imposed by the solvent fluid. Prominent natural and biotechnological systems where membranes are highly sheared include the plasma membrane of endothelial cells, and membranes used in biosensors for high throughput screening of drug candidates, and in water purification devices. In these systems membrane is in direct contact with the mainstream suspension flow, which is driven by pressure gradients. The efficiency and function of... 

Splitting in ingot cast structures and transverse cracks in continuous cast structures are the main problems of hot rolling of low carbon resulfurized free-cutting (LCRF) steels. Presence of high volume fraction of manganese sulfide inclusions in cast structure increases the risk of alligatoring in hot rolling. Because of high sulfur content of these steels and probability of formation of low melting point phases, minimum level of manganese and maximum level of copper and tin is necessary. Morphology of manganese sulfide is another important factor in hot forming of these steels, which can be controlled by level of deoxidation in steel making. In fact, MnS2 is present in fully killed...