Sharif Digital Repository

Considering the metallurgical challenges of aluminum alloy AA6061 in fusion-based additive manufacturing methods—such as solidification cracking, methods based on super-plastic deformation, which do not involve fusion and solidification challenges of this alloy, have gained attention for additive manufacturing of AA6061. This method based on super-plastic deformation is the FSAM process. The objective of this study is to investigate the effect of increased thickness resulting from Friction Stir Additive Manufacturing (FSAM) on the mechanical properties of the underlying layers, as well as to examine changes in mechanical properties along the build direction for samples with thicknesses... 

The injection process on cell is a very accurate and sensitive operation. This method is used for several new invented approaches such as tracytoplasmic Cell Injection or drug delivery. Controlling the injection force in micro scale is one of the problems of mentioned operations. Current huge and expensive laboratorial devices are helping the operators to do injection operation with :nore success. In this study a simple and novel microelectromechanical (MEMS) mechanism for doing injection process automatically on the biological cells is proposed. In order to controlling this device properly, we should model and simulate the operation condition from initial position to final condition. This... 

Given the growth of the world's population along with the increase in the percentage of urban population by 2050, the way of responding to food consumption will change in the future. Controlled Environment Agriculture will largely account for future food supply. Vertical Farming is one of these systems. But despite the efficiency of these systems in terms of land and water and also not being affected by weather conditions, the main challenge in these systems is the consumption of energy use per unit of crop production. The cost of energy is about 25 to 40 percent of the total costs. The purpose of this study is to develop an integrated dynamic model for the determination of vertical farm... 

Viewpoints of various interest groups should be addressed in any public service appraisal. Urban public transportation development and services have diverse impacts on users, operators and the community. The impacts can be characterized by a wide range of perspectives including: efficiency, effectiveness, efficacy, economic, social and environmental dimensions. Deployment of quantitative techniques, such as multicriteria decision making methods, would facilitate such a multidimensional analysis and appraisal. The objective of the study summarized herein was to shed some light on the perceived attributes pertinent to the Tehran regular transit service appraisal. The major services include... 

The goal of this research is to study the effect of local microcracking due to step by step pressure loading on the durability properties of geopolymer concrete. To better understand the behavior of GGBS-based GPC under different pressure stress levels, some experiments such as water permeability and water absorption conducted on the samples at each state of damage. Also, non-destructive tests such as ultrasonic waveform and pulse velocity (UPV) was used to quantify the extent of damage at each step. GGBFS and a blend of sodium silicate solution and 10 molar sodium hydroxide solution with SSSH⁄ ratio of 2 were used for production of GPC samples. GPC, OGPC and OPC samples with water to binder... 

Strut-based lattice structures have outstanding performance in load-bearing and energy absorption, and have attracted significant attention in various industries, including aerospace, medical, and automotive. With advancements in additive manufacturing methods, the use of these structures has become more attractive and practical. This study examines the deformation patterns and mechanical properties of hybrid-layered lattice structures based on the octahedron unit cell. One of the main objectives of this research is to create structures composed of different cells with suitable compatibility in a layered arrangement. Twelve different structures, including uniform and hybrid configurations of... 

In this thesis, combustion of liquid fuel spray under the condition of hot and diluted oxidizer, has been investigated. To this end, a novel type laboratory-scale test rig was designed to study the physics governing the MILD-Spray combustion conditions with an applied approach. The underlined test rig eliminates the operational problems of its predecessor test stands and is used for a heavier fuel with much more complex chemical composition (kerosene). The test section is axially symmetrical, in which the fuel is injected by a pressure-swirl atomizer in the direction of hot and diluted co-flowing air. With the use of the aforesaid test rig, the effect of variables such as oxygen... 

Monitoring driving behaviors of drivers, would avoid their dangerous behaviors and remarkably raise the safety. Nowadays real-time supervision is considered as one of the modern methods of controlling driving behaviors. Previously, due to expensive costs of required equipments and other restrictions, this kind of supervision hasn't been considered fairly. Nowadays increasing usage of smart phones, which contain multiple sensors, enables this type of supervision with lower costs. In the present study we would present some models, to assess the driving behavior via smart phone sensors such as accelerometer, gyroscope and rotation vector  

In practice, structures made of concrete are full of cracks. The strength of concrete is mainly determined by the tensile strength, which is about 10% of the compressive strength. As long as cracking in concrete is unavoidable, we have to try to minimize their detrimental effects. This objective can be achieved by resisting (or limiting) propagation of existing cracks. Because of this, reinforcement (mostly steel) is used to increase the carrying capacity of the material and to control the development of cracks. Concrete structures that fail, already shows a large number of large and small cracks before their maximum carrying capacity is reached. The failure of concrete can be characterized... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel...