Loading...
Search for:
motamed--mohammad-ali
0.142 seconds
Total 7108 records
Damage Identification in Structures with Lamb Waves and Optimal Sensor Layout Designing
, M.Sc. Thesis Sharif University of Technology ; Abedian, Ali (Supervisor)
Abstract
This study presents the best layout with optimal number of sensors for an arbitrary monitoring area based on reference free damage detection and localization. In recent years, damage detection approaches with the concept of instantaneous baseline measurements in Structural Health Monitoring (SHM) with lamb wave propagation are being developed. An array of spars transducers is obligatory in SHM with lamb wave propagation, so that designing the best one is a concern for many researchers. To obtain the best sensors layout, damage localization process should be done for all definable sensors layouts in many different crack positions. Obviously, doing this seems not practical as wave propagation...
Geometrical Modification of a Two-Stage Process Centrifugal Compressor to Improve the Performance Map
, M.Sc. Thesis Sharif University of Technology ; Ghorbanian, Kaveh (Supervisor)
Abstract
A Specific process centrifugal compressor is upgraded. The operating range and efficiency pattern are increased. A one-dimensional performance prognosis tool (CCPP) is developed. The tool uses mean streamline method as the analysis model. Since the working media has various components, a complete equation of state is utilized to model the thermodynamic behavior of the real gas in super critical pressures. The performance of the base-line compressor is deyermined. The performance prognosis tool is validated with available experimental data. Upgrade road map and methodology were introduced in accordance to domestic requirements. The performance of the upgraded compressor is investigated and...
Investigating Factors Affecting User Innovation in Mobile Phone Platforms
, M.Sc. Thesis Sharif University of Technology ; Khalili Nasr, Arash (Supervisor) ; Isaei, Mohammad Taghi (Supervisor)
Abstract
One of the main issues of business world is competition and competitiveness, and this cannot be happened unless one company absorb new ideas and innovations. Based on what scholars mentioned, companies should utilize users instead of professionals in order to create new innovations, and this is due to that users have better understanding of what users want. As a result, in the mobile platforms, platform owners need to know how to invoke users to create more innovative apps. In this research we were into finding important matters that increase number of innovation of users. We saw that lead-userness, toolkit support, work method autonomy, knowledge sharing, and modularity have an impact on...
Evaluating the Effect of Crumb Rubber on the Fracture Properties of Asphaltic Materials Using a Standardized Composite
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Fatigue cracking has a major impact on the performance of flexible pavements. Many test methods have been established to evaluate and estimate the fatigue life of asphaltic materials. Most of these test methods cannot successfully examine the fatigue properties of asphaltic materials. Recent studies demonstrate that using a standardized composite, which consists of glass beads and asphalt binder, can simulate the stress states that binder experiences in the field. This research used standardized composite to investigate the effect of crumb rubber on the fracture properties of asphaltic materials. To validate the test results, the authors conducted fracture tests on the Fine Aggregate Matrix...
Developing a New Method to Evaluate and Quality Control of Chip Seal
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Chip seal is one of the most economical pavement maintenance practice that extends pavement life. To ensure chip seal good performance several quality control methods have been developed. However, most of these methods are qualitative and only measure the stone loss under a certain number on loading. This research developed a new method for quality control of chip seal, based on the assumption that characteristics of the bond between chips and pavement surface play a key role in chip seal performance. To validate this test method, the authors used a wheel track loading test. The results from this research clearly showed that the characteristics of the bond between chips and pavement surface...
Investigating the Effect of Various Additives on the Curing Time of Chip Seal and Chip Seal Treatments in Different Climate Conditions.
,
M.Sc. Thesis
Sharif University of Technology
;
Motamed, Arash
(Supervisor)
Abstract
Recently, a new method to investigate chip seal performance has developed by a research team at Sharif University of Technology. This study investigates the effect of various additives such as CRM, SBR Latex, Hydrated Lime and Ordinary Portland Cement (OPC), on the curing time of chip seal by this method. In addition, the chip seal treatments were investigated in different climate conditions like Wet and Wet-Freeze zones. The overall performance of mixture specimens evaluated using creep loading test. In fact, the bonding properties between aggregates and surface of Hot Mix Asphalt measured. The test results were analyzed by using of the work and time parameters. These parameters were...
Design of Stress Absorbing Membrane Interlayer (Sami) and Overlay to Reduce Reflective Cracking
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Cracks or construction joints in an overlayed pavement can propagate into the overlay over time due to various factors, the most important of which are traffic and temperature loading, and cause premature failure of pavement. This propagated cracks are called reflective cracks and the phenomenon of crack propagation into the overlay is called reflective cracking. Use of stress-absorbing membrane interlayers (SAMI) is one of the ways can reduce the occurrence of reflective cracking and/or delay it. One of the most common SAMIs is an asphalt mixture consists of bitumen and aggregate layed down between the old and the veneer layers. The function of the SAMI depends on several factors such as...
An Investigation on the Effect of Filler Type and Content on the Performance of Asphaltic Materials
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
The objective of this research is evaluating the effect of filler type and content on the characteristics of asphaltic materials. The properties of the asphalt mixture are greatly influenced by its components. As asphalt mixtures are composed of two prominent components, aggregates and binder, the change in type and contents of these materials may lead to altering the performance of asphalt mixtures. Aggregates in the asphalt mixtures are categorized into three groups based on their particle sizes: coarse aggregate, fine aggregate and mineral filler. The effect of filler on the characteristics of asphalt mixtures can be examined by changing the type and content of filler and holding the...
Investigating Different Crumb Rubber Modification Methods in Cold Mix Asphalts
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Studies have shown that use of crumb rubber additive can improve the mechanical and performance properties of hot mix asphalts. Nowadays, different methods are used for adding crumb rubber to asphalt mixtures. However, no comprehensive research has been done to investigate the effects of these different methods in cold mix asphalts. In this research, different crumb rubber modification methods were evaluated to compare their effects on cold mix asphalts’ performance. In this regard, various crumb rubber modification methods, such as pre blending crumb rubber into the asphalt before emulsification, post blending crumb rubber into the prepared asphalt emulsion and blending crumb rubber with...
Modification of carbohydrate polymers via grafting in air. 1. Ceric-Induced synthesis of starch-g-polyacrylonitrile in presence and absence of oxygen [electronic resource]
, Article Starch - Starke ; Volume 54, Issue 3-4, pages 140–147, April 2002 ; Zohurian Mehr, Mohammad J
Abstract
Monomer grafting, a unique technique for polysaccharide modification, is always performed under inert (e.g., N2) atmosphere. This work is the first report related to evaluating the possibility and efficiency of the grafting of acrylonitrile (AN) onto starch in presence of oxygen. Thus, corn starch (in both granular and gelatinized states) as well as soluble starch were grafted by AN using a ceric-carbohydrate redox initiating system. Graft copolymerizations were performed under nitrogen, air, and oxygen atmospheres at similar conditions. Grafting occurrence was verified using chemical and spectral proofs. The polymerization mechanism and kinetics were investigated by recording the...
Modification of carbohydrate polymers via grafting in Air. 2. Ceric-Initiated graft copolymerization of acrylonitrile onto natural and modified polysaccharides [electronic resource]
, Article Starch - Stärke ; Volume 54, Issue 10, pages 482–488, October 2002 ; Zohuriaan-Mehr, Mohammad J
Abstract
Acrylonitrile (AN) was grafted onto various natural and modified polysaccharides (i.e., gum arabic, gum tragacanth, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) by using ceric-carbohydrate redox initiating system. After overcoming practical problems, mainly from the high viscosity of the aqueous solutions of the different substrates, the graft copolymerization reactions were run either in air or in N2 atmosphere under similar conditions. Grafting was confirmed using chemical and spectral (FTIR) proofs. The reactions were kinetically investigated using semi-empirical expressions and time-temperature profiles. An anomalous...
Evaluating the Effect of Crumb Rubber as a Binder Modifier on Bonding Properties of Chip Seal Against Environmental Effect
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Crumb Rubber is one of the main polymer modifiers of binders. This modifier can improve chip seal performance against ravelling (aggregate loss). The most concerning distress in chip seal is ravelling. Aggregate loss is not restricted to the early life of chip seal, but continues throughout the service life. Chip seal can be made with hot binders or emulsion binders. These two type of binder were modified with 7% and 15% of crumb rubber in applicable way. Then, two major environmental effect on chip seal performance, freeze-thaw and asphalt aging, were investigeted based on laboratory test. For this purpose, authors used chip seal bonding test. Chip seal bonding test is developed recently...
Modeling of in Plane Behavior of Retrofitted Adobe Walls with Finite Element Method under Cyclic Loading
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor) ; Ghannad, Mohammad Ali (Co-Advisor)
Abstract
Statistical studies indicate the fact that in Iran, like many other developing countries, a significant percentage of buildings are made of traditional materials and most of them are adobe buildings especially in rural areas. Furthermore, geological data indicates that Iran is located in alps-Himalayas seismic zone and exposed by destructive earthquakes and adobe buildings suffer the most damages comparing with other type of the structures. According to these explanations, this research deals with adobe buildings behavior and provides solutions for reinforcing them and improving the seismic response of these buildings. These studies include numerical modeling with finite elements methods by...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
Turnip (brassica rapa) peroxidase: Purification and characterization
, Article Industrial and Engineering Chemistry Research ; Volume 48, Issue 23 , Volume 48, Issue 23 , 2009 , Pages 10614-10618 ; 08885885 (ISSN) ; Ghaemmaghami, F ; Alemzadeh, I ; Sharif University of Technology
ACS
2009
Abstract
Partial purification of plant peroxidase from turnip (Brassica rapa) was optimized. Aqueous two phase system and precipitation by ammonium sulfate (as two parallel purification methods) were used. Polyethylene glycol/ammonium sulfate/NaCl (25:7:3%, w/v) system followed by gel-filtration chromatography gave a purification factor of about 36 fold. On the other hand, ammonium sulfate precipitation (60-80% deg) followed by gel filtration gave only about 13 purification fold. Hence, the aqueous two-phase system was more efficient and useful method as a primary purification step since it was less laborious, less time-consuming, and led to more purification factor. The partially purified turnip...
Numerical Investigation of Stress Absorbing Membrane Interlayer
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Stress Absorbing Membrane Interlayer (SAMI) is a slightly thin layer made of bitumen and aggregate placed between a pavement with limited cracking and overlay in order to avoid reflective cracking in overlay. SAMI’s performance depends on many factors such as pavement layer’s materials and thickness and existing pavement’s condition. Numerical simulations are powerful tools to evaluate SAMI’s performance. Previous studies showed that construction of SAMI does not necessarily reduce reflective cracking. This research investigated the effect of different parameters on SAMI’s performance using numerical simulations. The focus of this study was on the performance of SAMIs used between asphalt...
A Scheduling Method for Real-Time Tasks in Fog-Based Networks
, M.Sc. Thesis Sharif University of Technology ; Ejlali, Alireza (Supervisor)
Abstract
Due to the long physical distance between the users and the cloud data centers, the idea of considering fog layer was established to bring computations closer to the edge of the network, and provide a solution for latency-sensitive applications. In such applications, the tasks are offloaded, and assigned to the available virtual machines in the cloud or fog layers, which directly contribute to Quality of Service (QoS) requirements. Among various applications, the real-time applications require their tasks to finish before their deadlines. Therefore, an assignment or a scheduling algorithm is needed to assign incoming tasks to virtual machines in cloud or fog layer. Most of the research on...
Distributed Fault-tolerant Computation for Massive Data
, M.Sc. Thesis Sharif University of Technology ; Maddah-Ali, Mohammad Ali (Supervisor)
Abstract
In this thesis we consider the problem of distributed computation by many processors.We mainly concentrate on matrix multiplication problem in this thesis because of its importance. A distributed system consists of N worker processors and one master processor. The master processor should distribute the computation between workers and after computation in each of them, collect the results. In this thesis, we are going to mitigate the effect of straggler processors by using coding methods. Straggler processors can cause delays in the computation time.In this thesis, we firstly introduce a method to multiply any number of matrices in each other. The proposed method occurred in one shot without...
Incomplete Reduction of Iron Ore in a Fluidized Bed Reactor
, M.Sc. Thesis Sharif University of Technology ; Halali, Mohammad (Supervisor)
Abstract
The main goal of current investigation was partial reduction of Fe2O3 available in Hematite-rich ore to Magnetite by Fludization Bed method. The reductive gas, CO, was produced by incomplete combustion of Acetylene and Airmixed in inappropriate ratio. X-Ray Diffraction and X-Ray Florescence analyses were implemented in order to conducting qualitative analysis of present phases before and after reduction of the ore. Quantitative analysis of the same phases was also conducted by Titration. The latter analysis revealed the precise magnitude of available iron in each of the oxide containing phases. The chemical composition of the reactor gas was also determined before and after reduction...
Sequential Competitive Facility Location In Continuous Geometric Space
, M.Sc. Thesis Sharif University of Technology ; Abam, Mohammad Ali (Supervisor)
Abstract
Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...