Loading...
Search for: mousa-abadian--mohammad
0.159 seconds

    Iteratively Constructing Preconditioners via the Conjugate Gradient Method

    , M.Sc. Thesis Sharif University of Technology Mousa Abadian, Mohammad (Author) ; Farhadi, Hamid Reza (Supervisor)
    Abstract
    The main goal of this work is solving system of linear equations Ax = b, where A is a n_n square matrix, b is a n_1 vector and x is the vector of unknowns. When n is large, using direct methods is not economical. Thus, the system is solved by iterative methods. At first, projection method onto subspace K _ Rn with dimension m _ n is described, and then this subspace K is equalized with the krylov subspace. Then,some samples of projection methods onto the krylov subspace, such as FOM, GMRES and CG (Conjugate Gradient), are considered. The preconditioning of the linear system is explained, that is, instead of solving system Ax = b, the system PAx = Pb (P nonsingular), is solved, such that the... 

    Optimal Simultaneous Landing of Multiple Electric Vertical Takeoff and Landing Aircraft Using Game Theory

    , M.Sc. Thesis Sharif University of Technology Zare Mousa, Mona (Author) ; Malaek, Mohammad Bagher (Supervisor)
    Abstract
    The purpose of this thesis is to obtain a logical decision making for the landing of multiple electric vertical takeoff and landing (eVTOL) aircraft that are simultaneously approaching a skyport. This research was conducted in response to the expansion of cities and the increased demand for transportation. In fact, the increase in population in cities makes the existence of a new mode of air transportation unavoidable, and in this regard the landing and take-off of such aircraft is very important because using a control tower for managing the take-off and landings of these aircraft doesn’t seem possible. To do this, the problem of simultaneous landing of multiple eVTOL aircraft was divided... 

    YSZ Coating on Ferritic Stainless Steel Interconnect through Sol-Gel Method and Studying its Reaction with Glass Sealant in SOFC

    , M.Sc. Thesis Sharif University of Technology Mousa Mirabad, Homayoun (Author) ; Faghihi Sani, Mohammad Ali (Supervisor) ; Nemati, Ali (Supervisor)
    Abstract
    Solid oxide fuel cells are used to convert solid-state energy to direct electrical current by electrochemistry mixing a gas fuel and an oxidant in an oxide electrolyte. One of the most interesting aspects of this field for the researchers is the reaction between the metal interconnect and the glass sealant. In the current research, deposition of the YSZ coating onto the metal interconnect in order to impede the reaction with glass sealant and prohibition of its oxidation in oxidizing/reducing environment in high temperature, was mainly investigated. Effect of applying YSZ Thin layer in the intersection of Crofer steel and glass sealant on strength and chemical durability of these two... 

    Synthesis of Nano H-ZSM-5 for Methanol Conversion to Propylene

    , M.Sc. Thesis Sharif University of Technology Firoozi, Mohammad (Author) ; Baghghalha, Morteza (Supervisor) ; Asadi, Mousa (Co-Advisor)
    Abstract
    Nano and microsize H-ZSM-5 were synthesized by hydrothermal crystallization method with same batch composition to investigate the effect of crystallite size of H-ZSM-5 in the methanol conversion to propylene (MTP) process. The average particle size of nano and microsize H-ZSM-5 were obtained in the range of 0.15- 0.2 and 1- 2 µm, respectively. Also, optimized catalyst of Petrochemical Research and Technology Company was synthesized using terapropylammonium bromide as template. Nowadays, terapropylammonium bromide (TPABr) is cheeper than terapropylammonium hydroxide (TPAOH); therefore we used it as tamplate. Activity tests were conducted at operating conditions of T= 460˚C, P=1 atm and WHSV... 

    Advanced damage detection technique by integration of unsupervised clustering into acoustic emission

    , Article Engineering Fracture Mechanics ; 2018 ; 00137944 (ISSN) Behnia, A ; Chai, H. K ; GhasemiGol, M ; Sepehrinezhad, A ; Mousa, A. A ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    The use of acoustic emission (AE) technique for damage diagnostic is typically challenging due to difficulties associated with discrimination of events that occur during different stages of damage that take place in a material or a structure. In this study, an unsupervised kernel fuzzy c-means pattern recognition analysis and the principal component method were utilized to categorize various damage stages in plain and steel fiber reinforced concrete specimens monitored by AE technique. Enhancement of the discrimination and characterization of damage mechanisms were achieved by processing time and frequency domain data. Both domains (time and frequency) were taken into account to propose new... 

    Phenomenological tissue fracture modeling for an Endoscopic Sinus and Skull Base Surgery training system based on experimental data

    , Article Medical Engineering and Physics ; Volume 68 , 2019 , Pages 85-93 ; 13504533 (ISSN) Sadeghnejad, S ; Farahmand, F ; Vossoughi, G ; Moradi, H ; Mousa Sadr Hosseini, S ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    The ideal simulator for Endoscopic Sinus and Skull Base Surgery (ESSS)training must be supported by a physical model and provide repetitive behavior in a controlled environment. Development of realistic tissue models is a key part of ESSS virtual reality (VR)-based surgical simulation. Considerable research has been conducted to address haptic or force feedback and propose a phenomenological tissue fracture model for sino-nasal tissue during surgical tool indentation. Mechanical properties of specific sino-nasal regions of the sheep head have been studied in various indentation and relaxation experiments. Tool insertion at different indentation rates into coronal orbital floor (COF)tissue is... 

    Advanced damage detection technique by integration of unsupervised clustering into acoustic emission

    , Article Engineering Fracture Mechanics ; Volume 210 , 2019 , Pages 212-227 ; 00137944 (ISSN) Behnia, A ; Chai, H. K ; GhasemiGol, M ; Sepehrinezhad, A ; Mousa, A. A ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    The use of acoustic emission (AE) technique for damage diagnostic is typically challenging due to difficulties associated with discrimination of events that occur during different stages of damage that take place in a material or a structure. In this study, an unsupervised kernel fuzzy c-means pattern recognition analysis and the principal component method were utilized to categorize various damage stages in plain and steel fiber reinforced concrete specimens monitored by AE technique. Enhancement of the discrimination and characterization of damage mechanisms were achieved by processing time and frequency domain data. Both domains (time and frequency) were taken into account to propose new... 

    Microstructural characterization and enhanced tensile and tribological properties of Cu-SiC nanocomposites developed by high-pressure torsion

    , Article Journal of Materials Research and Technology ; Volume 20 , 2022 , Pages 4038-4051 ; 22387854 (ISSN) Akbarpour, M. R ; Gharibi Asl, F ; Mousa Mirabad, H ; Kim, H. S ; Sharif University of Technology
    Elsevier Editora Ltda  2022
    Abstract
    In this study, an attempt has been made to fabricate Cu-SiC nanocomposites by flake powder metallurgy and high-pressure torsion processing techniques at room temperature. Pure Cu and a mixture of Cu and nano-sized SiC powders were mechanically milled separately for 3 h and then green compacts were prepared by uniaxial pressing under 1 GPa pressure. The green compacts experienced 6-turn high-pressure torsion under a pressure of 6 GPa to prepare bulk Cu and Cu-SiC samples. The microstructures of the consolidated samples were characterized using an X-ray diffractometer and a high resolution scanning/transmission electron microscope, and the mechanical properties were evaluated by microhardness,... 

    Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell

    , Article Journal of Alloys and Compounds ; Volume 847 , 20 December , 2020 Mousa Mirabad, H ; Nemati, A ; Faghihi Sani, M. A ; Fakouri Hasanabadi, M ; Abdoli, H ; Sharif University of Technology
    Elsevier Ltd  2020
    Abstract
    Interactions between the metal interconnect and glass sealant in the solid oxide cells stack are critical to retaining the system integrity. To address this issue, in the current study, 8YSZ coating is applied on the Crofer22 APU steel via sol-gel and dip-coating method. Dense and continuous 8YSZ coatings are obtained on Crofer22 APU substrates. X-ray diffraction and Raman spectroscopy results show that both cubic and tetragonal structures of 8YSZ are formed. A glass-based sealing paste is applied on bare and 8YSZ coated Crofer22 APU steel. The interfacial compatibility and chemical stability of steel/glass and steel/8YSZ/glass joint couples are investigated using SEM and EDS line scan... 

    Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent

    , M.Sc. Thesis Sharif University of Technology Mohammad Karami (Author) ; Bazargan, Mohammad (Supervisor)
    Abstract
    The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

    Numerical Analysis of An Annular Gas Turbine Combustor

    , M.Sc. Thesis Sharif University of Technology Gandomi, Mohammad Hossein (Author) ; Farshchi, Mohammad (Supervisor)
    Abstract
    The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating

    , Ph.D. Dissertation Sharif University of Technology Labbaf, Mohammad Hossein (Author) ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)

    Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet

    , M.Sc. Thesis Sharif University of Technology Mohammadi, Mohammad Ali (Author) ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
    Abstract
    In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

    SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers

    , M.Sc. Thesis Sharif University of Technology Omati, Mohammad Mahdi (Author) ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
    Abstract
    During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

    Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks

    , M.Sc. Thesis Sharif University of Technology Shokouhi, Mohammad Hossein (Author) ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
    Abstract
    Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

    Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach

    , M.Sc. Thesis Sharif University of Technology Makhsousi, Mohammad Hossein (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a... 

    Estimate the Effect of Religiosity on Voter Turnout

    , M.Sc. Thesis Sharif University of Technology Jarrahi, Mohammad Mahdi (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections  

    Simulation and Control of an Aromatic Extractive Distillation Column

    , M.Sc. Thesis Sharif University of Technology Karima, Mohammad Mahdi (Author) ; Shahrokhi, Mohammad (Supervisor)
    Abstract
    In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all... 

    Investigation of Transport Phenomena in Clarification of Beer by Membrane Using CFD Method

    , M.Sc. Thesis Sharif University of Technology Kazemi, Mohammad Amin (Author) ; Soltanieh, Mohammad (Supervisor)
    Abstract
    During the brewing process, beer alternately goes through different chemical and biochemical reactions and solid–liquid separation stages. The clarification at the final step of brewing is a highly critical stage when it comes to producing a clear and bright beer. Recently, membrane technology has been successfully used in beer clarification, wherein Kieselguhr (diatomaceous earth) filtration is replaced by cross-flow microfiltration. The most important disadvantages of using microfiltration in clarification of beer is the fouling and flux decline during the process. The phenomenology of fouling mechanisms is still undefined and selection of an appropriate technique for flux enhancement in...