Sharif Digital Repository

In this study, modification of Polyvinylidene fluoride membrane in order to reduce membrane fouling in membrane bioreactors is investiged. To achieve this goal, chemical modification and grafting methods were used. Initially, by chemical modification, the reaction was made to make hydroxyl groups on the membrane surface. The hydroxyl functional groups were used as a site for connecting of subsequent monomers. Finally, the lysozyme enzyme was used as the main modifier to improve the hydrophilicity and antibacterial properties of the membrane surface. To evaluate the performance of the modified membrane in comparison with the pristine membrane, different tests, such as water contact angle... 

Reverse osmosis membranes are one of the most common methods of desalination of water in the world today. In the meantime, aromatic polyamide thin-film composite reverse osmosis membranes have one of the best performances and can be widely used in industry. This project aims to make surface modifications on the made raw membranes and increase the degree of crosslinking to improve the functional properties of the membrane, such as the percentage of salt rejection and the flux of permeate, and the reduction of fouling. For this purpose, polyvinyl alcohol and l-arginine along with maleic anhydride as the crosslinking agent and hexamethylene diisocyanate were used for surface modification of the... 

In the current situation of energy, gas storage is one of the basic needs. Different methods have been used in order to storage gases. One of these methods is the adsorption of gases on solid materials, which are called as adsorbents. In recent decades, different gas adsorbents, such as silica gel, zeolite and activated carbon, have been studied. Most of these adsorbents are nonorganic materials. Recently, many researchers have tried to apply polymeric materials as gas adsorbents. In this regard, the obtained results on the different polymers showed that it is possible to achieve the proper gas adsorption. In this study, different samples were prepared from polysulfone by phase inversion... 

Every year hundreds of thousands of lives are taken away worldwide by natural disasters such as earthquakes. Walls made of concrete blocks or bricks, are amongst the most vulnerable type of walls, which tend to collapse during an earthquake. Due to their good sound and thermal insulation properties, unreinforced masonry (URM) walls are widely used in partitioning many of the commercial and residential buildings worldwide. URM is considered one of the most common types of partition wall systems in many of the school and hospital buildings and commercial buildings.URM partition walls are known to have very low drift capacity in seismic events and the failure mechanisms are known to be mostly... 

To produce polyurea, a secondary or higher amine must be combined with a diisocyanate. For this purpose, we first combined diethylenetriamine, and hexamethylene diisocyanate, which did not have good mechanical properties due to the aliphatic nature of the molecules. Then, instead of hexamethylene diisocyanate, we used MDI, which was mixed using a mechanical mixer but became a paste that was not suitable for coating applications. To reduce the viscosity of MDI, propylene carbonate was added to improve mixing, but the gel time also increased. Because the solvent was non-polar and the amine was polar, it was decided to add the solvent, amine, and polyvinyl alcohol as surfactants to allow faster... 

One of the most efficient and effective methods of water and wastewater treatment is the use of membranes and can be a good alternative to traditional methods such as adsorption, chemical coagulation and .... One of the limitations of this method is membrane fouling, which limits its use in industry.In this study, ultrafiltration membrane made by phase inversion method from a combination of PVDF and SPES polymers and surface modified with hyperbranched polyethylene imine and its performance in cationic coating paint purification was investigated. Also, the performance of this membrane has been investigated by calculating the separation rate, pure water flux, contact angle and specifications... 

The aim of this project is to achieve a semi permeable high flux membrane with a reasonable salt rejection for the treatment of low osmotic pressure water. A thin film composite membrane consists of three polymeric layers was studied in this project. These layers were polyester support, polysulfone sub layer and polyamine selective layer. The polyester support provides the mechanical resistance against the operating pressure. The polysulfone sub layer provides the suitable area for polyamide synthesize, and the polyamide layer is the selective active layer of membrane.
The resistance to water penetration in sub layer was reduced first and then, the pores in the polyamide layer refined by... 

The separation ofacetic acids in binary water solutions hasbeenstudied using a reverse osmosis (RO) membrane. Thin film composite polyamide membrane is used in this study.Thin-film composite (TFC) membrane was prepared through the interfacial polymerization between m-phenylenediamine (MPD) and trimesoyl chloride (TMC) on the polysulphone support membrane.The solute permeation was carried out under applied pressure of 5 bar at 25°C. In this work the effect of various synthesis conditions on the membrane performance was investigated. Parametric studies were conducted by varyingconcentration of reactants, reaction time, curing time and curing temperature. By suitable combination of these... 

Ethylene vinyl acetate copolymer produces flexible products and is compatible with many polymers and additives, the reason is that it has Vinyl group which is polar and Ethylene group which is nonpolar. In fact, it consists of two parts. One is a hard and semi-crystalline Polyethylene region and the other is soft, flexible, polar, and amorphous Vinyl Acetate. Improving the properties of this copolymer can broaden its application. For this purpose, Ethylene Vinyl Acetate with 18 and 28% Vinyl Acetate was used as a matrix and nano-alumina as reinforcement in this project. The spherical structure and chemicallu active surface, along with significant mechanical properties, suggeats Alumina... 

Today reverse osmosis (RO) is the dominant technology for desalination. Most of commercially available RO membranes are polyamide thin film composite (TFC) types which exhibit good performance. However, the major obstacle for application of polyamide TFC RO membranes is fouling which can be mitigate by surface modification.In this research, surface modification of fabricated aromatic polyamide TFC RO membranes was carried out using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g/L). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm)... 

Composite membranes are one of the promising membranes for overcoming the limitations of conventional membranes in gas separation application by improving the permeability and selectivity. However, it is still very challenging to achieve adhesion interface between the top selective layer and the bottom support layer. The present study demonstrates that this challenge can be overcome appropriately by utilizing a series of adhesive polymer as selective layer to prepare composite membrane. To this end, in the first section a series of acrylate-terminated polyurethanes (APUs) based on poly(ethylene glycol) (PEG) with different molecular weights (Mn) of 600, 1000, 1500, 2000 and 4000 g/mol,... 

This study aims to investigate polysulfone (PSF) hollow fiber mixed matrix membranes (MMMs) properties containing Uio-66-NH2 and Mil-125-NH2 nanoparticles, groups of metal-organic frameworks (MOFs), for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membranes characterization conducted by ATR-FTIR, FE-SEM, EDX, TEM, and AFM was confirmed the presence of MOFs nanoparticles. Also, the evaluation of specific surface area of nanoparticles was done by BET. The water contact angle (WCA) results indicated the improvement of MMMs hydrophilicity, enhancing the pure water flux from 46.8 L/ m2h for the pristine membrane to... 

This study has concentrated on preparation of mixed matrix membranes (MMMs) in order to improve the separation performance of the neat poly(amide-12-b-ethylene oxide)(Pebax1074) membrane. Pebax1074 and zeolite SAPO-34 were used to fabricate MMM for the first time. Micro-size SAPO-34 was added to polymer matrix up to 35wt% based on polymer weight; even though at this high loading percentage the prepared membranes were not stable enough to be tested for characterization and gas permeation. The obtained results showed more than 30% increment in CO2 permeability, along with slight growth and reduction in N2 and CH4 permeabilities, respectively for 30wt% zeolite content membranes. Permeability... 

Many aroma compounds of fruit juice recovered by thermal processes like evaporation and distillation can lead to undesirable chemical changes and even their loss. Pervaporation is a promising process for the recovery of volatile organic compounds from their aqueous solutions. In the present work, pervaporation recovery of Butyl acetate as a model solution ofgrape juice aroma compoundwas evaluated with polyethersulfone (PES) and ethylvinylacetate (EVA) membranes. PES membrane generally showed better selectivity so that the separation factor at the concentration of 500 ppmand the temperature of 30°C for PES and EVA membranes, respectively, was 230.78 and 156.9. The effect of two operating... 

In this project, modification of reverse osmosis membrane was investigated in order to reduce the biofouling in treatment of brackish water. Furthermore, the technique which is used to attain the favorable results is graft polymerization to modify the membrane’s surface with grafting acrylic acid as hydrophilic monomer onto polyamide exploited as last layer in reverse osmosis membrane. This technique is a free radical grafting, andfree radicals which are needed for grafting are provided by the redox system potassium persulfate-sodium metabisulfite which was used as initiator. To figure out the best concentration of acrylic acid, initiator and process time in order to achieve a new membrane... 

In this study, the response surface methodology (RSM) based on the central composite design (CCD) were used to prepare a polypropylene grafted maleic anhydride (PP-g-MA) microporous flat sheet membrane via thermally induced phase separation (TIPS) method. Mixture of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) were used as diluent. The effect of the polymer composition and coagulation bath temperature on the morphology and performance of the fabricated microporous membranes in a bioreactor (MBR) were investigated. Analysis of variance (ANOVA) was used to determine which variables and interactions between variables have a significant effect on our responses. The ANOVA revealed that the... 

Water is essential for human life and other organisms. Increasing population and consequent increase in water consumption has made freshwater scarcity a global problem. Desalination of saline water sources is a long-term solution to this problem. One of the most challenging issues in desalination is the management and disposal of brine. Disposal of brine into the sea and surface waters is the primary solution for brine management. Due to the environmental problems caused by the discharge of brine into the sea and surface waters, the concept of zero liquid discharge has recently been considered. In this research, an economic study of reverse osmosis-electrodialysis-crystallization structure... 

Application of fuel cells as one of the new and clean energy generators at recent years is many interesting for governments. In many cases hydrogen gas is fuel of these cells. One of the problems at this field is issue of hydrogen storage with a safety and ecconemical way. Usually storage of hydrogen be done with several different ways : Composite tank, Liquid hydrogen, Metal hydride , Chemical hydride, carbon nanotube and etc. Use of polymers that have ability of adsorption is one of topics that is attended at these years , because of their low density and easy process ability and low explosion risk and economical aspect . So at this research we try to identify polymers that have... 

This study is an attempt to develop a multiple-choice discourse completion test (MDCT) in order to measure Iranian EFL learners’ knowledge of interlanguage pragmatics in relation to the speech acts of request and apology as interlanguage language pragmatics testing is new field of inquiry. In developing of the current pragmatics test we went through the following steps: The first step was exemplar eneration where Iranian EFL learners wrote down situations in which they would need to make requests and apologies. In the second stage, the extent to which each situation suggested by learners in step one was likely to occur was investigated. The third step was scenario generation and initial... 

This research aims to construct a membrane using supercritical system which can be used in the process of brackish water filtration.
For this purpose solutions of polysulfone with desired concentrations were prepared and set to be stretched on glass or nonwoven polyester with adjustable thickness. Then the film of solution was transferred into supercritical cell. Carbon dioxide was used as anti-solvent and it causes super saturation in solution.
In order to investigate the effect of operating parameters on membrane structure, pore size and porosity were considered as a symbol of membrane structure. These parameters include cell pressure and polysulfone concentration.
Generally,...