Sharif Digital Repository

In this study, modification of Polyvinylidene fluoride membrane in order to reduce membrane fouling in membrane bioreactors is investiged. To achieve this goal, chemical modification and grafting methods were used. Initially, by chemical modification, the reaction was made to make hydroxyl groups on the membrane surface. The hydroxyl functional groups were used as a site for connecting of subsequent monomers. Finally, the lysozyme enzyme was used as the main modifier to improve the hydrophilicity and antibacterial properties of the membrane surface. To evaluate the performance of the modified membrane in comparison with the pristine membrane, different tests, such as water contact angle... 

For many years of tall buildings with regard to the development and progress towns are necessary for the urbanite of the city and are considered as progress of the symbols societies. These buildings because of high wore their features special treatment under the influence lateral loads like the earthquake. In a way that today is an important issue in seismology and Earthquake Engineering all the powerful movements of the earth and its effect on the performance of the workforce special buildings as tall. Two points in this important subject. First modeling and simulations of the Most Powerful Earthquakes that in general occur in the field of near source earthquake generator. The earthquake of... 

Nowadays best using of fossil fuels sources of the country (and) importance of comparison against lack of capacity in petrol production make determined the programmers and the directors to foresee and design expanded programs of the goals, to use natural gas for car fuels. To reach fulfillment of these programs, the confirmed needs of the natural gas cylinders are improved and make it essential to invest on producing compressive natural gas cylinders. In this way economical and technical change researches has been done in order to construct on department to produce 200,000 compressive natural gas cylinders in a year during two sets.(shifts) According to the results of technical researches... 

This study analyzes determinants of customers’ switching intentions. The context of this study is service area and we have studied customers’ behavior of internet service providers. In this research we focus both on transactional and relational variables. We have tried to clarify the role of consumers’ commitment on their intentions to switch. Drawing from literature and based on previous service switching research we have developed a switching model. This includes two component of customer commitment and the antecedents of commitment. We have developed our hypothesis according to this model and the literature review. The survey was administered to ADSL internet home users. A sample of 130... 

Dynamic impedance functions method is most recent approach in the analysis of soil-foundation dynamic interaction, and presented for massless rigid foundations. Impedance functions are frequency dependent functions, and used to obtain dynamic response of foundation with arbitrary mass subjected to dynamic loading of any frequency and magnitude. The important assumptions for appropriate useof mentioned method are rigidity of foundation and visco-elastic behavior of the soil beneath the foundation. In this study, experimental vertical impedance functions of square and circular foundations have been investigated,using physical modeling tests. A granular soil layer with finite thickness... 

Phased array systems which are used for sending and receiving electromagnetic signals in mandatory directions are widely used in today’s wireless communication, satellite communication, and radar systems. Phased array systems are composed of units called transmitter/ receiver (TR) modules. These units are connected to antennas in one end and to the combiner/divider at the other end and are playing a major role in determining the quality of phased arrays. Transmitter/Receiver units include a phase shifting circuit for controlling the phase and an attenuator circuit for amplitude control of the signal being sent or received, solid state switches and a number of amplifiers. The aim of this... 

Drop penetration into the capillary tube, as a classical problem, has been studied over 100 years. But there are a few studies that investigate forced impregnation of capillary tubes, which has major application in coating, inkjet printing and rain drop penetration into the soil, have been made. A comprehensive numerical investigation on millimeter droplet impact dynamics on a thick capillary tube with micrometer sized pore is conducted and validated against experimental data. This work is extended to oblique impact of drops into pores and normal impact on nanoscaled pores. We apply the finite volume numerical method to solve the time-dependent governing equations of continuity, momentum in... 

Optimal investment strategies are often derived in continuous time models, but have to be implemented in discrete time. It has been shown that in models with stochastic volatility or jumps; this could lead to significant utility loss, for an investor who utilizes ‘Derivatives’ in his/her portfolio. In this study, we determine the optimal investment strategies with discrete trading explicitly taken into account, through ‘Stochastic Dynamic Programming’. These strategies are in the form of optimal factor exposures for portfolio. The investor, then, needs to use sufficient non-redundant Derivatives in addition to the ‘Stock’ to gain the desired exposures in each point of state space he meet.... 

The systemic approach to innovation plays a central and somewhat unifying role within the field of innovation studies. The main tenets of the approach were developed during the last decades of twentieth century by a bunch of researchers who were tackling with the problem of the economic nature of innovation and its role in growth and competitiveness. The innovation systems approach spread out rapidly throughout the globe and established itself as a framework for studying and policy making in academia and national and supranational organizations. This vast and fast expansion, however, was accompanied by a set of critical contemplations on the theoretical soundness of the approach and also by... 

Optimization of heat transfer in vehicle's underhood which contains radiator, cylidir block, cylinder head and … with minimum pressure loss on engine is one of the most important problems of the car companies in all over the world.To design some cooling parts like simple radiators which doesn’t have a effective cooling effect, we can use equations.but for more complicated geometries which is morte efficient we have many complicated solutions.So in this condition computationl analysis and laboratories play an important role.in this condition we should consider that producing a sample and the process of verifying the result of test is too expensive.So recently the car companies prefare... 

Linear structure of polypropylene, which is a direct result of Ziegler-Natta catalysts, led to the melt strength of the polymer is low and it does not show hardness strain. This defect is cause to the use of polypropylene in some processes, such as thermoforming, making foam etc. are limited. A main methods to solve this defect are branching structure of the polymer. There are three general methods for this purpose, which are modified by chemical, electron beam irradiation and polymerization in the presence of metallocene catalyst. The first two methods that past processing, polypropylene branching using linear type is produced, while the third method branching occurs during polymerization.... 

Recent studies have shown that comprehensive characterization of the behavior of infilled rock fractures under saturated and unsaturated conditions requires knowledge of morphological details of fracture surface, as well as state of stress of infill materials and their initial innate conditions (e.g., void ratio, water content, degree of saturation and dry density). This study presents the details and typical results from a new testing approach to study the hydro-mechanical behavior of the infilled rock fractures under different stress states and saturation conditions. The new testing approach incorporates the axis translation technique for suction control, a flow pump for the measurement of... 

Regaining biomechanical function, comfort and quality of every-day life is a prime consideration when designing prosthetic devices for amputees. The magnetorheological (MR) prosthetic knee, which is the subject of this study, is an example of such a device. The study presents a comprehensive and a combined MR device design and MR fluid design approach, aiming to advance the MR prosthetic knee. First, this study focuses on developing a new configuration on magnetorheological (MR) brake damper as prosthetic knee. The new configuration is a rotary damper using MR fluid with a single rotary disc will act as a brake while MR fluid is activated by magnetic field in different walking gait. The main... 

The fastest growing of data in the fields of economic, cultural and scientific quick analysis of this data is one of the needs of users. The inability of the traditional programming model for processing large data makes MapReduce programming model to be introduced. MapReduce model, processing big data in shorter time available. Users to analyze large data processing, rent necessary resources from infrastructure of cloud as one of the most popular are provided. Due to cloud resources acquired and run-time program on selected configurations, the cost of these resources are paid according to their use. So if resources are not proportionate with the needs of the program will be wasting money and... 

In recent years, Intelligent Transportation Systems (ITS) have received special attentions both in research and in commercial areas. Increased infrastructure facilities, like surveillance cameras, has made this concept even more attainable than before. In this respect, the ability to automatically extract information from traffic images, as one of the key inputs of ITSs, is of great importance. With an increased number of surveillance cameras and the need for more accurate information regarding the road users and their interactions, in order to better city traffic management, building and repairing roads, trip time estimation, number of people per roads estimation and etc, using human... 

Understanding the flow of liquids and particularly water in nanochannels is important for scientific and technological applications, such as for filtration and drug delivery. In this study, we perform molecular dynamics simulations to investigate the transfer of single-file water molecules across straight or nonstraight single-walled carbon nanotubes (SWCNTs). In contrast with the macroscopic scenario, the nonstraight nanostructure can increase the water permeation. Remarkably, compared with the straight SWCNT, the nonstraight SWCNT with the minimal bending angle of 30° in the simulations can enhance the water transport up to 3.9 times. Also increasing length and diameter of carbon nanotubes... 

Recently, there has been a surge of research activities in the area of networks in the systems and control community. One foundational class of questions on networked systems pertains to their controllability. While there are classical tests to check the controllability of linear time-invariant (LTI) systems, their applications to large-scale networks is numerically infeasible. Indeed, finding a minimum cardinality set of input nodes that ensure the controllability of a network is NP-hard. Moreover, when the interaction strengths along the edges of a network are unknown, the classical controllability test cannot be applied. To overcome these issues, an alternative set of approaches involves...