Loading...
Search for: mousavi--masoud
0.132 seconds

    Recovery of Vanadium from Leaching Solution of Roasted Isfahan Steelmaking Slag Using Solvent Extraction

    , M.Sc. Thesis Sharif University of Technology Mousavi, Reza (Author) ; Askari, Masoud (Supervisor)
    Abstract
    Solvent extraction of vanadium (V) from sulfated leaching solution of the converter slag of the Isfahan steel company followed by stripping of this element from the organic solvent were examined in this study. In the experimental section, 2-ethyl-1-hexanol extractor was utilized for selective separation of V(V) from the acidic medium containing Si, Na, Fe, Al, Ca, and P ions. Ammonium chloride solution was also used for stripping V from the organic phase. Under optimal condition (pH=1.9, T=65℃, extractor concentration of 68% and organic phase volume fraction of 0.66), 91% was extracted in solvent extraction stage. Under optimal stripping conditions (pH=7.5, T=25℃, organic phase volume... 

    Alginate/CNC Hydrogel Nanocomposites as Adsorbents of Water Pollutants

    , M.Sc. Thesis Sharif University of Technology Mousavi, Yeganeh (Author) ; Frounchi, Masoud (Supervisor)
    Abstract
    With the increase in population, industrial advancements, and urbanization, the demand for clean water resources has risen. However, industrial pollutants, particularly heavy metals, pose a significant threat to aquatic ecosystems, necessitating their removal from wastewater. Among various methods, surface adsorption using hydrogels has proven to be effective. This research aims to develop hydrogels from sodium alginate and carboxymethyl nanocellulose for the adsorption of heavy metals, specifically copper and nickel, from wastewater. The results indicate that increasing the percentage of nanocrystalline cellulose enhances the hydrogel's swelling rate, while higher alginate content... 

    Production of Poly (ethylen-co-vinyl acetate) and Nano Diamond Nanocomposite

    , M.Sc. Thesis Sharif University of Technology Mollavaysi, Pouya (Author) ; Frounchi, Masoud (Supervisor) ; Mousavi, Abbas (Supervisor)
    Abstract
    Ethylene vinyl acetate copolymer produces flexible products and is compatible with many polymers and additives, the reason is that it has Vinyl group which is polar and Ethylene group which is nonpolar. In fact, it consists of two parts. One is a hard and semi-crystalline Polyethylene region and the other is soft, flexible, polar, and amorphous Vinyl Acetate. Improving the properties of this copolymer can broaden its application. For this purpose, Ethylene Vinyl Acetate with 18 and 28% Vinyl Acetate was used as a matrix and nano-alumina as reinforcement in this project. The spherical structure and chemicallu active surface, along with significant mechanical properties, suggeats Alumina... 

    Preparation of Hydrogen Adsorbent Nanoporous Polymer for Fuel Cell Applications

    , M.Sc. Thesis Sharif University of Technology Matloob Moghaddam, Mojtaba (Author) ; Frounchi, Masoud (Supervisor) ; Mousavi, Abbas (Supervisor)
    Abstract
    Application of fuel cells as one of the new and clean energy generators at recent years is many interesting for governments. In many cases hydrogen gas is fuel of these cells. One of the problems at this field is issue of hydrogen storage with a safety and ecconemical way. Usually storage of hydrogen be done with several different ways : Composite tank, Liquid hydrogen, Metal hydride , Chemical hydride, carbon nanotube and etc. Use of polymers that have ability of adsorption is one of topics that is attended at these years , because of their low density and easy process ability and low explosion risk and economical aspect . So at this research we try to identify polymers that have... 

    Performance Evaluation of Market-Making Methods in the Iranian Stock Market

    , M.Sc. Thesis Sharif University of Technology Mousavi Kejani, Masoud (Author) ; Talebian, Masoud (Supervisor) ; Heidari, Mahdi (Supervisor)
    Abstract
    Market making is a fundamental trading topic in which an agent creates liquidity in an asset by offering to buy and sell on that security. The challenging problem in market-making is related to inventory risk, which may cause the accumulation of unfavorable positions at the end of the market and create losses. Algorithms are designed for making trades to choose the buying and selling prices and the number of orders by predicting the price to minimize the amount of security in the market maker’s portfolio. In this paper, first, we examine the different market-making algorithms and evaluate their performance in the financial markets of Iran. Then, a model using the reinforcement learning... 

    Chemical Adjustment of Membrane Surface to Reduce Fouling in Membrane Bioreactors

    , M.Sc. Thesis Sharif University of Technology Vaghar-Mousavi, Danial (Author) ; Bastani, Dariush (Supervisor) ; Mousavi, Abbas (Supervisor)
    Abstract
    In this study, modification of Polyvinylidene fluoride membrane in order to reduce membrane fouling in membrane bioreactors is investiged. To achieve this goal, chemical modification and grafting methods were used. Initially, by chemical modification, the reaction was made to make hydroxyl groups on the membrane surface. The hydroxyl functional groups were used as a site for connecting of subsequent monomers. Finally, the lysozyme enzyme was used as the main modifier to improve the hydrophilicity and antibacterial properties of the membrane surface. To evaluate the performance of the modified membrane in comparison with the pristine membrane, different tests, such as water contact angle... 

    Improvement of performance and fouling resistance of polyamide reverse osmosis membranes using acrylamide and TiO2 nanoparticles under UV irradiation for water desalination

    , Article Journal of Applied Polymer Science ; Volume 137, Issue 11 , 2020 Asadollahi, M ; Bastani, D ; Mousavi, S. A ; Heydari, H ; Vaghar Mousavi, D ; Sharif University of Technology
    John Wiley and Sons Inc  2020
    Abstract
    The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results... 

    Long Term Effective Factors on House Price of Metropolises of Iran

    , M.Sc. Thesis Sharif University of Technology Moeeni, Safoura (Author) ; Nili, Masoud (Supervisor)
    Abstract
    The notable share of housing sector in GDP (approximately five percent) shows this sector’s relation with macroeconomic activities. On the other hand, House as an asset leads housing sector to be affected by monetary and fiscal variables. A dynamic panel data was used in this study to evaluate the relations between housing sector and some macroeconomic variables in metropolises of Iran. As results show, in long term growth of liquidity, GDP per capita and sharp ratio have positive effects, and land per capita has negative effect on housing price in metropolises of Iran. Price increases have not been equal in different cities. Inequality of land price between metropolises and between... 

    Estimating an Index of Iran’s Informal Economy in 1350-1386 With Concentration on the Impact of Government’s Intervention by EMIMIC Model (The Multiple Indicators-Multiple Causes Model and Error-Correction Model)

    , M.Sc. Thesis Sharif University of Technology Khandan, Abbas (Author) ; Nili, Masoud (Supervisor)
    Abstract
    In this research, an Index of Iran informal economy in response to the government interventions in credit, labor and product markets is stimated by EMIMIC model. To do this, first these interventions are measured using principal components analysis. In the model, the variables GDP and employment are used as indicators and taxation rates, government distortions in credit, labor and product markets, government expenditure, per capita income, unemployment and inflation as causes of the informal economy. We conclude these government interventions have affected Iran informal economy and their influence is more than indirect interventions influence such as taxation. The estimated index of Iran... 

    Water Quality Modeling of Urban Streams

    , M.Sc. Thesis Sharif University of Technology Soltani, Maryam (Author) ; Tajrishy, Masoud (Supervisor)
    Abstract
    With altering natural state and increasing impervious surfaces, traditional urbanization leads to deteriorating the environment and water catchments. During the years most efforts in order to control the urban runoff outflow, have been focused on quantity; and awareness about improving water quality has been raised just in the last few years and, which emphasizes on pollution source control. Standard water quality sampling methods are time consuming, expensive and because of sampling in broad geographic areas, difficult; however modeling is a more efficient way in assessing water quality and as worries about non-point source pollution grows, different kinds of models have been used to... 

    The Political Economy Aspects of the Redistributive Role of Government in a General Equilibrium Micro-founded Macro Model

    , M.Sc. Thesis Sharif University of Technology Zakeri, Hassan (Author) ; Nili, Masoud (Supervisor)
    Abstract
    The role of government in economy has been a controversial subject in economics. Lately, there has been some fundamental change in evaluating this subject. One could mention two of these as 1) realizing the importance of micro-founded macro model for evaluating policy, and 2) taking into consideration the rent-seeking behavior of politicians. In this research, a general equilibrium in a micro-founded macro model will be discussed and then in political economics framework, the effect of government on this equilibrium will be investigated. Only the redistribution role of government has been considered. First, the model in which a benevolent government is seeking optimal policy is Discussed.... 

    Measurement of Gini Coefficients by Means of Household’s Special CPI in Iran(1984-2005)

    , M.Sc. Thesis Sharif University of Technology Ghasemi, Mojtaba (Author) ; Nili, Masoud (Supervisor)
    Abstract
    Gini coefficient is the most prevalent index for the measurement of inequality and is usually extracted by means of nominal variables based on income or expenditures of households. In this study we have extracted more accurate Gini coefficients. By using the raw data of Households Budget Survey (HBS) and STATA software, a special CPI for each household of the sample is extracted. Subsequently nominal expenditures are deflated by these special CPIs, and at last, Gini coefficients are extracted from real expenditures. Our findings indicate that in recent years, extracted Gini coefficients are remarkably higher than prevailing ones.
     

    Parametric Evaluation of the Y- Shaped Bracing Frame and Introducing a New Method for Design

    , M.Sc. Thesis Sharif University of Technology Sedaghati, Parshan (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    This paper investigates the behavior of the Y-shaped bracing system. Because of the special type of eccentricity in this system, the behavior of the frame is strongly dependent on the geometrical changes of the braces. So that even in the elastic region, it shows the geometrically nonlinear behavior. The amount of eccentricity is very effective on the nonlinear behavior of the frame. Also the ratio of cross sections of the bracing members has a very important impact on the expected performance of the frame. The results show that this system tolerates large displacements, and can act like a base isolation system. Firstly, using a two-dimensional accurate modeling related to the geometrical... 

    Assessment of Seismic Behavior Factor of Irregular Midrise Steel Structure

    , M.Sc. Thesis Sharif University of Technology Baghi, Alireza (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    The Overstrength, Ductility and the Response Modification Factor (R) for 70 steel X-braced , Inverted-V-Braced and Offcenter Bracing System frames were evaluated by performing pushover analysis of model structure with various stories (3,6,9,12&15 story) and span length (4,6&8 meter). Some result were compared with those from nonlinear dynamic analysis. According to the analysis result the R factors obtained from nonlinear dynamic analysis are 15% more than obtained from pushover analysis and R factors computed from pushover analysis were generally smaller than the values given in the design codes. R factors in Irregular structure in height are about 90% of R values in regular structure in... 

    Synthesis of γ-Fe2O3 Nanoparticles by Gelatin Mediator and Synthesis of γ-Fe2O3/SiO2/PCA/Ag-NPs Nanostructure Drug Delivery System

    , M.Sc. Thesis Sharif University of Technology Masoud, Nazila (Author) ; Pourjavadi, Ali (Supervisor)
    Abstract
    Maghemite (γ-Fe2O3) nanoparticles were produced after high temperature oxidation of gelatin-Fe3O4 nanocomposite, obtained from a common coprecipitation process of Fe2+ and Fe3+ ions in an alkaline medium in the presence of a gelatin protein as an effective mediator. Size, shape, surface morphology and magnetic properties of the prepared γ-Fe2O3 nanoparticles were characterized using XRD, FTIR, TEM, SEM and VSM data. The results revealed that primary, gelatin-Fe3O4 nanocomposite had been formed and next, the gelatin decomposition in furnace produced a spinel structure of γ-Fe2O3. The effects of furnace temperature and time of heating together with the amount of gelatin on the produced... 

    On The Behavior of Low-Rise, Irregular, Dual Structures

    , M.Sc. Thesis Sharif University of Technology Khazaei, Siamak (Author) ; Mofid, Masoud (Supervisor)
    Abstract
    The Response modification factor R represents the behavior of the structure such as ductility, overstrength and the inherent redundancy. This factor shall be defined according to the type of lateral force resisting system. However, there are some complexities and/or uncertainties in codes related to the R factor according to the height, form of irregularities and structural systems. Therefore, from the scientific point of view as well as reliability, it is very clear that the R factor cannot be similar for all kinds of structures, categorized as a specific group. In this investigation, assuming a low-rise, vertically irregular structure with a heliport which has a dual structural system... 

    Modeling Phosphorous Movement in Watersheds with SWAT (Case Study: Kan Watershed)

    , M.Sc. Thesis Sharif University of Technology Delkash, Majid (Author) ; Tajrishy, Masoud (Supervisor)
    Abstract
    Maintaining the quality of water is of paramount importance for lakes with tourist attraction capacity. Inaccurate prediction of the quality state of lake in design phase may lead to some trouble in future. Kan River known as the main source of water feeding for the urban lake located in the north of Chitgar park passes through various villages and restaurants discharging nutrients via runoff and wastewater in the aforementioned river. Previous investigations reveal that phosphorous plays a central role in the water quality of this river and the associated downstream lake. In this research, Kan watershed,located in in the north-west of Tehran, was simulated. Considering the "Total Maximum... 

    The Role of Socio-Political Institutions in Economic Performance of Developing Countries

    , M.Sc. Thesis Sharif University of Technology Mollaei, Yaser (Author) ; Nili, Masoud (Supervisor)
    Abstract
    Findings of economics in last decade shows that social and economic institutions have direct influence on economic performance of a society. However, these institutions are determined by the state. In different regimes, the political power is in the hand of different social groups with different preferences and goals; as a result, different social and economic policies and institutions are take place in different political regimes. In this research, we study economic performance of a society under control of two different political regimes: in first, the majority rules the state and in second, there is a totalitarian regime in which; the political power is concentrated in hand of a group of... 

    Exploring Economic Performance of Resource-Rich Countries by Separating their Political Systems

    , M.Sc. Thesis Sharif University of Technology Jahandideh, Mahsa (Author) ; Nili, Masoud (Supervisor)
    Abstract
    Economic performance of resource rich countries is related to their political systems. In this research, consistent to Hosseini (1388), we develop a theoretical model in which we classify the political systems of those countries to four systems based on corruption, myopic behavior of the incumbent, ideological bias of people, and the popularity shocks in elections. We show that in a fixed institutional framework, democracy leads to higher welfare for people and better economic performance. However, in a society with low corruption, high political convergence, and low popularity shocks both democracy and dictatorship maximize the social welfare in the model  

    Aerodynamic Improvement of Cooling Systems for a Thermal Power Plant Using CFD

    , M.Sc. Thesis Sharif University of Technology Salemkar, Hossein (Author) ; Darbandi, Masoud (Supervisor)
    Abstract
    This research considers the wind effects on the thermal deficiency of natural draught dry cooling tower (NDDCT) using the CFD tool. To have a realistic study, the NDDCT of Shazand Powerplant, located in Shazand, Iran, is simulated as the sample cooling tower design points. Considering of Shazand NDDCT model, the mal-effects of local wind were studied against its thermal efficiency. As is known, the thermal efficiency of a NDDCT can be affected by local wind in either its upper (i.e., outlet section) or lower (i.e., the radiator section) parts. In this study, a full study is performed to quantify the mal-effects of local wind on either upper or lower parts of one tower. The results show that...