Sharif Digital Repository

In this thesis, desublimation (deposition) of xenon gas has been studied. Through the past decades, desublimation, became one of the important methods of separation. High purity products and applicability when common methods of separation, as distillation, are not applicable, make desublimation more efficient. Heat transfer phenomenological study of direct phase change of gas to solid (desublimation), evaluation of variation of different parameters during the phase change and finally comparison of experimental results of desublimation and mathematical modeling data are the main considerations in present thesis. Because of low cost and accessibility and heat transfer phenomenological study... 

Recently, there has been a surge of research activities in the area of networks in the systems and control community. One foundational class of questions on networked systems pertains to their controllability. While there are classical tests to check the controllability of linear time-invariant (LTI) systems, their applications to large-scale networks is numerically infeasible. Indeed, finding a minimum cardinality set of input nodes that ensure the controllability of a network is NP-hard. Moreover, when the interaction strengths along the edges of a network are unknown, the classical controllability test cannot be applied. To overcome these issues, an alternative set of approaches involves... 

In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom... 

Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater... 

Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of... 

In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

Due to recent advances in laser technology and instruments, laser assisted machining processes has gained extra attention by scientists and industries. Naturally, effective modeling of the process is of great interest for researchers. Machining processes are generally modeled via FE tools and based on the requirements of model, it can be performed either mechanically or thermos-mechanically. About the LAM problems, it is basically meaningless to have a model without considering thermal effects. Hence, modeling is performed in two steps where through the first one, a thermal problem is solved to bring the temperature distribution of the work piece as the initial conditions of the next step.... 

Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

Low Back Pain (LBP) is an important public health problem and also a source of continuing economic concern in across the world. Many clinicians and researchers have focused on LBP due to the prevalence of it, especially in industrialized societies in recent years. Despite technological advances in diagnosis and the introduction of numerous interventions, besides increasing automation in the workplaces, the incidence of back pain in a wide range of workers in industrial environments has been reported. A better understanding of the different functions of the neuromuscular system of the spine may lead to adopt strategies to prevent LBP incidence as well as provide appropriate exercises... 

Thin film graphene oxide(GO) membranes have been promising potential for gas purification due to thin lamellar microstructure, stable a few atom thick layers and very short intersheet distances. In this research, the nanoporous graphene oxide membranes have been prepared by vacuum and pressurized ultrafiltration on the modified polyacrylonitryle(mPAN) sublayer for helium separation from Nitrogen and carbon dioxide gas mixture. The separation performance of synthesized GO membrane was controlled by varying parameters such as concentration of stabilized aqueous GO solution, pores size range of support and its surface properties, centrifuge time, applied pressure after synthesis, humidity,... 

In this thesis, optimal offering strategy problem of a virtual power plant (VPP) as a price-maker player in day-ahead frequency constrained electricity market is presented. The optimal offering strategy problem is modeled as a bi-level optimization problem. In the upper level, the total profit of VPP is maximized. In the lower level, the clearing conditions of frequency constrained electricity market is modeled. The proposed bi-level optimization problem is reformulated as a mathematical programming with equilibrium constraints (MPEC) problem by using Karush-Kuhn-Tucker (KKT) conditions. Then, the proposed MPEC problem, which is nonlinear and hard to solve by commercial solvers, is... 

This reaserch is study on the performance of evaporation tubes used in mini jet engines which has been done experimentally using laboratory equipment. In this study, researchers have tried to simulate the laboratory conditions as much as possible to the real conditions inside the mini-jet engine, increase the accuracy of the results and increase the results and bring them closer to the results inside the mini-jet engine. The experiments are divided into two categories, cold and hot In cold tests, an attempt is made to study and investigate the types of two-phase flow regimes created by applying different fluid and air flow rates, and to select annular flow regimes from among them.... 

Growth of the fuel consumption in the world and the greenhouse effect of its pollution get industrial managers and environmental activities attention. Skin drag force has a significant role in energy uses. The drag reduction property of superhydrophobic surfaces shows a new approach for investigators to reduce energy uses. Surface with 150° contact angle called superhydrophobic surface.In this project, a superhydrophobic coating is developed based on acrylic hydroxyl resin by silica nanoparticles. This coating can be sprayed on any surface. Using the Iron oxid particles and silica nanoparticles together produces hierarchical micro-nano structures. This coating has a 160.1° contact angle on... 

One of the natural functions of wetlands is to neutralize the dangers caused by floods. Therefore, if a facility is built in the area of wetlands, it should not disturb their natural functioning. During the Iran-Iraq war, several antenna roads were built across the wetland, and the construction of these roads divided the wetland into 5 separate reservoirs. After the end of the war and with the development of the oil fields west of Karun (Hor al-Azim region), the extraction of oil from this region was put on the agenda. With the flood of April 2018, these facilities and roads were exposed to damage and flooding, and oil production from these reservoirs was stopped. In this research, after... 

Over the past five decades, the proliferation of electronic devices and the advent of Internet of Things (IoT) technology have ushered in a profound revolution in integrated circuit technology. In contemporary electronics, digital integrated circuits rely predominantly on CMOS transistors. Among the notable limitations associated with CMOS transistors are their non-zero off-state current and limited sub-threshold slope. In response to these limitations, researchers have ventured into a burgeoning field known as "Beyond CMOS," exploring technologies like Tunnel Junctions, Carbon Nanotube FETs, and more. Additionally, alternative approaches that blend electronic and mechanical principles in... 

Foil gas bearings are compliant surface, self-acting hydrodynamic bearings that use ambient gas as their working fluid. They do not require external pressurization and are typically constructed from several layers of sheet metal foils. In high-speed, high-temperature applications the GFB’s have the advantage of developing higher load capacities than with fixed geometry gas bearings. Since GFB’s have a complex structure consisting of a spring-like substructure with an overlying flexible surface, there exists a great variety of permutations on any given design. At current work presents a 1D model for GFB with couple solving Reynolds and Euler-Bernoulli beam equation. This mean top foil assume to... 

Price limits are boundaries established by market regulators to confine daily movements of security prices within a predetermined price range. In this study, we have used the data of trades of all companies listed in the Tehran Stock Exchange during the years 1385-1393 to study the characteristics of stocks that hit price limits repeatedly using a panel regression model with fixed effects and the generalized method of moments (GMM). In fact, this study aims at investigating the price limits in Tehran Stock Exchange by a novel and distinct approach. In general, risky stocks exhibit more price volatility and thus are more likely to experience price-limit hits. In summary, the results reveal... 

Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the...