Sharif Digital Repository

A numerical study on mixing/segregation phenomena in a pressurized fluidized bed with large particles of Geldart D type of binary density but same diameter with high velocity gas was performed by the use of discrete particle simulation. Particle mixtures are composed of spherical particles with 2mm diameter and 1g/cm3 flotsam density and different jetsam densities of 1.25, 2 and 2.5g/cm3 with jetsam volume fraction of 0.5. The particles are initially packed approaching perfect mixing state in a rectangular bed and then fluidized by gas uniformly injected at the bottom of the bed. Effect of increase of pressure and density ratio was investigated and mixing/segregation behavior is discussed in... 

Gas-oil gravity drainage that takes place in the gas-invaded zone of fractured reservoirs is the main production mechanism of gas-cap drive fractured reservoirs as well as fractured reservoirs subjected to gas injection. Interaction of neighboring matrix blocks through reinfiltration and capillary continuity effects controls the efficiency of gravity drainage. Existence of capillary continuity between adjacent matrix block is likely to increase the ultimate recovery significantly. Liquid bridge formed in fractures has a significant role in maintaining the capillary continuity between two neighboring matrix blocks. The degree of capillary continuity is proportional to capillary pressure in... 

This research focuses on a sensitivity analysis of accumulators configuration in a Large Break Loss of Coolant Accident (LB-LOCA) in Bushehr Nuclear Power Plant (BNPP). In this way, primary and secondary side components are modeled using RELAP5/MOD3.3 code. Having modeled the BNPP in a steady state hot full power operation, the thermal hydraulic consequences of a LB-LOCA in the reactor inlet is considered and sensitivity analysis for four major different configurations of accumulators are studied in detail. It is shown that any arrangement of accumulators in the Reactor Pressure Chamber (RPC) or Reactor Collection Chambers (RCC) leads to variation of fuel and clad temperatures during the... 

The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results... 

An optical amplifier followed by a bistable element has been statistically analyzed before [1]. In this manuscript, output noise analysis represents, then signal to noise ratios (SNR) are calculated either for input or output. It will be shown that noise reduction, can be achieved by a proper selection of parameters  

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

One of the distributed solutions for scaling Web Search Engines (WSEs) may be peer-to-peer (P2P) structures. P2P structures are successfully being used in many systems with lower cost than ordinary distributed solutions. However, the fact that they can also be beneficial for large-scale WSEs is still a controversial subject. In this paper, we introduce challenges in using P2P structures to design a large-scale WSE. Considering different types of P2P systems, we introduce possible P2P models for this purpose. Using some quantitative evaluation, we compare these models from different aspects to find out which one is the best in order to construct a large-scale WSE. Our studies indicate that... 

Crack detection is a vital component of structural health monitoring. Several computer vision-based studies have been proposed to conduct crack detection on concrete surfaces, but most cases have difficulties in detecting fine cracks. This study proposes a deep learning-based model for automatic crack detection on the concrete surface. Our proposed model is an encoder–decoder model which uses EfficientNet-B7 as the encoder and U-Net’s modified expansion path as the decoder. To overcome the challenges in the detection of fine cracks, we trained our model with a new training strategy on images extracted from an open-access dataset and achieved a 96.98% F1 score for unseen test data. Moreover,... 

Crack detection is a vital component of structural health monitoring. Several computer vision-based studies have been proposed to conduct crack detection on concrete surfaces, but most cases have difficulties in detecting fine cracks. This study proposes a deep learning-based model for automatic crack detection on the concrete surface. Our proposed model is an encoder–decoder model which uses EfficientNet-B7 as the encoder and U-Net’s modified expansion path as the decoder. To overcome the challenges in the detection of fine cracks, we trained our model with a new training strategy on images extracted from an open-access dataset and achieved a 96.98% F1 score for unseen test data. Moreover,...