Sharif Digital Repository

Many of industrial processes include suspension in their middle section of production, final product or residue. Majority of these two-phase mixtures are unstable due to their large particle size (larger than one micrometer). Therefore, Study of particle distribution in suspensions for generation of stabilized suspension becomes significant. In this study a new mechanism in stabilization of microparticle suspension known as nanoparticle halo mechanism has been assessed. Experiments have been conducted in dilute suspension and two-way coupling range. The effect of the presence of silica nanoparticle on zirconia microparticle suspension has been investigated. The effect of zeta potential of... 

Investigation of flow field and vortex structures in swirl flows and their velocity components, have received widespread interest among the researchers in the field of fluid mechanics. Due to the importance of vortex structures and their applications in combustion chambers, a special type of combustion chamber which is called “bidirectional swirl combustor” has been investigated in this work. Accurate identification of vortex phenomenon and flow structure in vortex engine leads to better design and control of the engine in the field of stability, geometry, cooling and combustion efficiency. Eperimnetal methods in this area are difficult but very valuable and efficient. Numerical methods are... 

In this project, one-dimensional and two-dimensional numerical approaches are used to study the effect of applying electrohydrodynamics on the temperature and species mass fraction profiles along the micro-combustor. A premixed mixture of H2-Air with a multi-step chemistry (9 species and 19 reactions) is used and thermal conductivity of the mixture is considered as a function of species thermal conductivity and temperature by using a set of new relations. Both thermal and radical quenching mechanisms are important in the micro-scale combustion due to increasing of area-to-volume ratio and significant heat loss from the combustor walls. By inserting a number of electrodes into the... 

Electroosmosis is the predominant mechanism for flow generation in lab-on-a-chip devices. These microfluidic devices are microscale laboratories on a microchip that can perform clinical diagnoses. Since most biofluids encountered in these devices are considered to be non-Newtonian and the cross section of microchannels in these devices is close to a rectangular shape, In this study, the hydrodynamically and thermally fully developed combined electroosmotically and pressure driven flow of power-law fluids in rectangular microchannels is analyzed. The governing equations are first made dimensionless and then transformed into new ones based on the computational parameters which provide mesh... 

In the recent decades, cleanrooms have found growing applications in broad range of industries such as pharmacy and microelectronics. Concerns about negative effects of the contaminant exposure on the human health and product quality motivate many researchers towards understanding of the airflow and contaminant distribution through these environments. With an improvement in computational capacity of the computers, computational fluid dynamics (CFD) technique has become a powerful tool to study the engineering problems including indoor air quality (IAQ). In this research, indoor airflow in a full-scale cleanroom is investigated numerically using Eulerian–Eulerian approachand the results are... 

First studies in internal combustion engines have focused on increasing engine power and efficiency, reducing engine volume and improving fuel quality. However, nowadays most studies are concentrated on decreasing exhaust emissions and usage of regenerative fuels while maintaining engine size, efficiency and power. Surveying fuel type in direct injection engines, requires investigation of microscopic and macroscopic spray characteristics including spray tip penetration, spray cone angle, spray area and sauter mean diameter, since these parameters determine air-fuel mixture quality. In this study, spray of ethanol as a regenerative fuel that reduces emissions such as NOx and CO is... 

A new experimental setup was fabricated; equipped with an adjustable chamber’s length, with air tangentially flowing through the wall of vortex engine. In a vortex combustion chamber, the tangential inlet fuel or oxidizer creates both inner and outer vortices which are rotating in the same angular direction. Indeed, inner vortex moves from head to the end of engine in the axial direction; however, outer vortex moves in the opposite direction. This setup was fabricated to see the effect of fuel nozzle characteristics on the wall temperature of the chamber. In a vortex engine, vortices affect spray droplets and force them to have a spiral path. Moreover, relative velocity of droplets and flow... 

Vortex engine has shown to be a credible substitute in thermal power and aerospace industries mainly due to their advantages such as better mixing, improved combustion, and considerable cooled walls of combustion chamber. The engine geometry and tangential inlet oxidizer create inner and outer vortices rotating in the same angular direction. The inner vortex moves from head to the end of engine in the axial direction and outer vortex moves in the opposite direction. In the vortex engine, vortices affect spray droplets and force them to have a spiral path and apply a centrifugal force on the droplets to push them towards sidewall. Also axial relative velocity of droplets and flow filed act as... 

Vortex flow is one of the most sophisticated fluid movements in nature which has great industrial and scientific importance. In this dissertation, in order to study the combustion process due to a vortex flow, a new experimental model of a cold wall vortex engine, was designed, fabricated and tested with oxidizer issuing tangentially toward the end of the chamber. The cold wall effect in these chambers is a result of the cool layer of oxidizer which significantly reduces the amount of heat transfer to the chamber’s wall. This experimental model was designed to withstand the massive temperature rise resulting from the usage of Polyethylene as fuel and Nitrous oxide as oxidizer. In a series of... 

Microbiologically Influenced Corrosion (MIC) of concrete sewer ptpes and wastewater collection systems has been reported in many places of the world. Recently, numerous copper compounds have been used for bacterial growth control in sewer pipes. In this thesis, bath parameterswere optimized in order to maximize copper osmosis to the porous concrete matrix.Concrete pipes were electrochemically coated inCopper Lactate bath in a constant current mode (1=0.6 A), while temperature was set to 25, 50, 75 and 95
°Cand pH to 9,10 and 11. Specimens were then characterized by scanning electron

microscopy, optical microscopy, XRD andAAS. Copper Osmosis was highest in pH=9 and... 

The purpose of this research is to provide a method for finding a “good” solution to the network design problem with less computational efforts, faster than the existing conventional methods of solving this problem. Network design problem is the problem of selecting a subset of projects from a set of alternative projects so that to optimize the objective function (e.g., the total travel time in the network) subject to the set of existing constraints (e.g., budget). Due to the combinatorial and non-convex nature of the problem, its solution could be very cumbersome and time-consuming. Various methods have been proposed to solve this problem efficiently, providing good solutions at high... 

Epilepsy is one of the diseases that affects the quality of life of epileptic patients. Epileptic patients lose control during epileptic seizures and are more likely to face problems. Designing and creating a seizure detection system can reduce casualties from epileptic attacks. In this study, we present an automatic method that reduces the artifact from the raw signals, and then classifies the seizure and non-seizure epochs. At all stages, it is assumed that no information is available about the patient and this detection is made only based on the information of other patients. The data from this study were recorded in Temple Hospital and the recording conditions were not controlled, so... 

Aerodynamics loads and aeroheating during reentry, are one of the challenging issues in designing One of the main challenges in the design and application of reusable spacecrafts is the aerodynamic and thermal loads acting on their structures during reentry into the atmosphere. For this reason, all the concepts/prototypes presented in the 20th century were either not fully reusable, or were partially canceled, or did not have economic justification. In this report, the aerodynamic loads on the first stage of a launch vehicle during the launch and return phases have been investigated. Due to the fact that the main part of the first stage of the vehicle includes fuel and oxidizer tanks, the...