Loading...
Search for: naderi--mohammad-javad
0.178 seconds

    Monte Carlo Simulation of Asymmetric Elastic Rod Model and Calculation of
    Probability of Loop Formation

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Saber (Author) ; Ejtehadi, Mohammad Reza (Supervisor)
    Abstract
    Sharply bent DNA plays an important role in many biological processes such as gene regulation, DNA replication and recombination. DNA cyclization experiments are well suited to study of sharply bent DNA, because they are sensitive to strongly bent conformations. Results of these experiments show that short length DNA molecules are more flexible than predicted by elastic rod model. Therefore, based on these experiments, the elastic rod model is not a suitable model for explaining elastic behavior of DNA at small lengths, although it can explain DNA elasticity at large length scales. Recently, it has been shown that a new model called asymmetric elastic rod model can explain high flexibility... 

    Performance Analysis of DS/TH CDMA Cognitive Radio System under Doubly-Selective Fading Scenario

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Saeed (Author) ; Mashhadi, Saeed (Supervisor)
    Abstract
    Nowadays providing services beyond the expected performance of users has become the most competition among telecommunication companies. Increase data rate at which a user is able to use a wireless system, you know that most of these companies are competing with each other. However, due to limited power to be sent to a transmitter, the first proposal to increase the data rate of wireless data transmission has a wider bandwidth. This results in increased bandwidth demand and thus sales by the government. During these years, many researchers have tried to increase efficiency in the use of broadband transceiver. These systems due to the wide band signal transmission and high-resolution mass... 

    , M.Sc. Thesis Sharif University of Technology Abtahi, Mohammad Reza (Author) ; Abedini, Javad (Supervisor)
    Abstract
    In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom... 

    Relay-assisted Multiple-input Multiple-output Underwater Wireless Optical Communication Systems

    , M.Sc. Thesis Sharif University of Technology Jamali, Mohammad Vahid (Author) ; Salehi, Javad (Supervisor)
    Abstract
    Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater... 

    Mobility-Aware Resource Allocation in Hybrid Visible Light Communication and 5G Radio Access Technologies Networks

    , M.Sc. Thesis Sharif University of Technology Dastgheib, Mohammad Amir (Author) ; Salehi, Javad (Supervisor)
    Abstract
    Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of... 

    Introducing a Numerical Method for Estimating Median Crack Depth during Machining on Optical Glasses

    , Ph.D. Dissertation Sharif University of Technology Asqari, Mohammad Amin (Author) ; Akbari, Javad (Supervisor)
    Abstract
    In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

    Production of Uranium Dioxide Nano Powder With Hydrothermal Method in Supercritical Water Reactor

    , M.Sc. Thesis Sharif University of Technology Golzary, Abooali (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor) ; Karimi Sabet, Javad (Co-Advisor)
    Abstract
    Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

    Lithium Isotopes Separation by Electrolysis Amalgam by a Continuous Method

    , M.Sc. Thesis Sharif University of Technology Kowsari, Mohammad Reza (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Co-Advisor)
    Abstract
    Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

    Derivation of a Scalable Mass Ttransfer Equation for Adsorption of Uranium on Resin in Stirred Reactors

    , M.Sc. Thesis Sharif University of Technology Naderi, Ali (Author) ; Outokesh, Mohammad (Supervisor) ; khanchi, Alireza (Supervisor)
    Abstract
    Resin In Pulp(RIP) is One of the most important processes for separation of uranium from ore while concentration of uranium in ore is low , based on adsorption of uranium that exist in the slurry on onion exchanger resins .uranium ore is dissolved in sulfuric acid and slurry that contain uranium is produced,then this slurry enter stirred reactors and adsorption process is performed.RIP are accepted universally and now adays countries such as canada,south africa and australia use this process when concentration of uranium in slurry after leaching process is 100-500 ppm.in iran also this process is performing in ardacan-saghand mine.Kinetic of adsorption process in stirred reactors has been... 

    Design and Analysis of a Novel Adaptive Cross-Layer Error Control for Wireless Multimedia Sensor Networks

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Yousof (Author) ; Rabiee, Hamid Reza (Supervisor)
    Abstract
    Wireless sensor network (WSN) multimedia applications impose new challenges in the design of algorithms and communication protocols for sensor networks. Indeed, wireless multimedia sensor networks (WMSNs) must provide relatively high throughput and low end-to-end delay and jitter while being energy-efficient. In view of these challenges, error control is an important mechanism which enables us to provide robust and high quality multimedia communication in WSNs. In this thesis, we first perform a comprehensive performance evaluation of different error control schemes for multimedia communication over WSNs. The results of our analysis show how wireless channel errors can affect the performance... 

    Stability and Stabilization of Fractional Order Linear Time Invariant Swarm Systems

    , Ph.D. Dissertation Sharif University of Technology Naderi Soorki, Mojtaba (Author) ; Tavazoei, Mohammad Saleh (Supervisor)
    Abstract
    In this thesis, stability and stabilization of fractional-order linear time invariant swarm systems are studied. In recent years it has been proved that the exact model of dynamic agents in most of the swarm systems can be modeled more accurate by fractional order differential equations. Stating the motivation of choosing this subject, the achievements of the thesis can be divided into two general parts: Investigating the stability of fractional-order swarm systems and how to stabilize such systems. After introducing the fractional-order systems and fractional-order model of swarm systems in the introduction part, the literature review is presented in Chapter 2. In Chapter 3 the results... 

    Numerical Methods for Approximation and Visualization of Invariant Manifolds in Dynamical Systems

    , M.Sc. Thesis Sharif University of Technology Naderi Yeganeh, Hamid (Author) ; Razvan, Mohammad Reza (Supervisor)
    Abstract
    Invariant manifolds are important objects in the theory of dynamical systems. The stable manifold theorem is a very important theorem about this concept which proves the existence of stable and unstable manifolds in a wide range of dynamical systems. The importance of invariant manifolds encourages us to view their pictures. It helps us to understand their bahavior. For this purpose, at first we need to approximate the invariant manifold we want to visualize. There are several algorithms designed to approximate invariant manifolds. Those algorithms approximate a set of points on an invariant manifold and then provide an approximation of the manifold by the calculated points. Visualizing an... 

    Mechanical Simulation of Corneal Ring Implant Surgery for Keratoconus Treatment Considering Tissue Collagen Structure

    , M.Sc. Thesis Sharif University of Technology Naderi Eshkaftaki, Mohammad Reza (Author) ; Asghari, Mohsen (Supervisor)
    Abstract
    Keratoconus is one of the most common optical (visual, eye) diseases that usually occurs in youth or early third decade of life. In this disease, cornea gets thin and loses it initial shape and becomes conical. Doctors use different methods for its treatment including use of glasses, contact lenses (hard or soft), cornea transplantation and also cross linking of cornea. Each of these methods have their limitations, on the other hand, considering that this disease progresses and intensifies, ophthalmologists use corneal ring implant surgery for the treatment of this disease in its advanced levels. A good ring implant in corneal causes increased strength and also cause corneal to get back to... 

    Development of a Computer Code for Thermo Hydraulics Analysis of Prismatic High Temperature Gas Cooled Reactors

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Hossein (Author) ; Ghofrani, Mohammad Bagher (Supervisor) ; Jafari, Jalil (Supervisor)
    Abstract
    A prismatic high temperature gas-cooled reactor (HTGR), which is a graphite moderated, helium-cooled reactor, is a promising candidate for next generation nuclear power plant in that it enables applications, such as hydrogen production or process heat for petrochemical by supplying heat with core outlet temperatures as high as 1000°C. A Thermal Hydraulic Analysis Code (THAC) for gas-cooled reactors has been developed. THAC implicitly solves heat transfer equation of fuel, graphite block and helium. Three types of fuel pins were considered; solid fuel pin, fuel pins with inside holes and annular fuels with coolant flow from its inside and outside surfaces. THAC predicts axial and radial... 

    Generating Mutants for User Interface Testing in Web-based Applications

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Javad (Author) ; Mirian Hosseinabadi, Hassan (Supervisor)
    Abstract
    In recent years, the user interface of web-based applications has become more and more complicated. Various technologies, architectures, and tools are being used to create a modern user interface. Users interact directly with the user interface, so its functionality has a significant impact on their satisfaction and it is required to design special test suites for the user interface. Furthermore, we need a method to measure the quality and effectiveness of test suites. An effective test suite is a test suite which is able to detect real faults. But this definition is ambiguous, and hence, not practical. A method called Mutation Testing solves this problem and instead of real faults, uses... 

    Design, Analysis and Manufacturing of Gas Foil Bearing

    , M.Sc. Thesis Sharif University of Technology Majidi, Mohammad Hassan (Author) ; Akbari, Javad (Supervisor) ; Movahhedy, Mohammad Reza (Supervisor)
    Abstract
    Foil gas bearings are compliant surface, self-acting hydrodynamic bearings that use ambient gas as their working fluid. They do not require external pressurization and are typically constructed from several layers of sheet metal foils. In high-speed, high-temperature applications the GFB’s have the advantage of developing higher load capacities than with fixed geometry gas bearings. Since GFB’s have a complex structure consisting of a spring-like substructure with an overlying flexible surface, there exists a great variety of permutations on any given design. At current work presents a 1D model for GFB with couple solving Reynolds and Euler-Bernoulli beam equation. This mean top foil assume to... 

    A Study on Automatic and Early Detection of Lameness in Dairy Cattle

    , M.Sc. Thesis Sharif University of Technology Honarvar Mahjoobin, Mohammad Hadi (Author) ; Akbari, Javad (Supervisor)
    Abstract
    Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the... 

    Boron Isotope Separation by Distillation of BF3-(C2H5)2O Complex

    , M.Sc. Thesis Sharif University of Technology montazeri, Meysam (Author) ; Otukesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

    The Synthesis and Characterization of Nano Zeolitic Molecular Sieve for Separation of 133Xe from 85Kr

    , Ph.D. Dissertation Sharif University of Technology Charkhi, Amir (Author) ; Kazemeini, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    In this study the feasibility of xenon separation from xenon-krypton mixture was investigated by utilizing of the chromatographic column filled with nano and micron sized NaY zeolite. For this purpose the nano NaY with the yield of 100% related to Al2O3 and the average size of 98.6 nm was synthesized through the clear solution method with the mid-adding of NaOH. Furthermore, a novel method for granulation of nano zeolite was developed by utilizing sodium alginate as an external template. In this method the production of uniform spherical granules with the different sizes in the range of several milimiteres to 100 µm was easily performed. Moreover, the results showed that the adding of... 

    Separation of Boron Isotopes by Distillation of (CH3)2O-BF3 Complex

    , M.Sc. Thesis Sharif University of Technology abdollahi, Mojtaba (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation...