Loading...
Search for: naderi--mohammad-yousof
0.122 seconds

    Monte Carlo Simulation of Asymmetric Elastic Rod Model and Calculation of
    Probability of Loop Formation

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Saber (Author) ; Ejtehadi, Mohammad Reza (Supervisor)
    Abstract
    Sharply bent DNA plays an important role in many biological processes such as gene regulation, DNA replication and recombination. DNA cyclization experiments are well suited to study of sharply bent DNA, because they are sensitive to strongly bent conformations. Results of these experiments show that short length DNA molecules are more flexible than predicted by elastic rod model. Therefore, based on these experiments, the elastic rod model is not a suitable model for explaining elastic behavior of DNA at small lengths, although it can explain DNA elasticity at large length scales. Recently, it has been shown that a new model called asymmetric elastic rod model can explain high flexibility... 

    , M.Sc. Thesis Sharif University of Technology Haghgo, Mojtaba (Author) ; Shafahi, Yousof (Supervisor) ; Tabatabaei, Nader (Supervisor)
    Abstract
    Fatigue is one of the most common failure modes that reduce the structural integrity of asphalt pavements. Dynamic tests are used as fatigue performance indicators for asphalt mixture. However, these tests are expensive and require special equipment and set up. At this research, the main goal is to develop a fuzzy model which is more efficient than the existing regression model for prediction of the fatigue life. A database from the available data from various research was compiled. For each model, a comparison between Fuzzy and regression output by actual outputs was done and it was seen that the fuzzy modeling can predict fatigue life very closely. Finally, the required software for this... 

    Performance Analysis of DS/TH CDMA Cognitive Radio System under Doubly-Selective Fading Scenario

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Saeed (Author) ; Mashhadi, Saeed (Supervisor)
    Abstract
    Nowadays providing services beyond the expected performance of users has become the most competition among telecommunication companies. Increase data rate at which a user is able to use a wireless system, you know that most of these companies are competing with each other. However, due to limited power to be sent to a transmitter, the first proposal to increase the data rate of wireless data transmission has a wider bandwidth. This results in increased bandwidth demand and thus sales by the government. During these years, many researchers have tried to increase efficiency in the use of broadband transceiver. These systems due to the wide band signal transmission and high-resolution mass... 

    Derivation of a Scalable Mass Ttransfer Equation for Adsorption of Uranium on Resin in Stirred Reactors

    , M.Sc. Thesis Sharif University of Technology Naderi, Ali (Author) ; Outokesh, Mohammad (Supervisor) ; khanchi, Alireza (Supervisor)
    Abstract
    Resin In Pulp(RIP) is One of the most important processes for separation of uranium from ore while concentration of uranium in ore is low , based on adsorption of uranium that exist in the slurry on onion exchanger resins .uranium ore is dissolved in sulfuric acid and slurry that contain uranium is produced,then this slurry enter stirred reactors and adsorption process is performed.RIP are accepted universally and now adays countries such as canada,south africa and australia use this process when concentration of uranium in slurry after leaching process is 100-500 ppm.in iran also this process is performing in ardacan-saghand mine.Kinetic of adsorption process in stirred reactors has been... 

    Design and Analysis of a Novel Adaptive Cross-Layer Error Control for Wireless Multimedia Sensor Networks

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Yousof (Author) ; Rabiee, Hamid Reza (Supervisor)
    Abstract
    Wireless sensor network (WSN) multimedia applications impose new challenges in the design of algorithms and communication protocols for sensor networks. Indeed, wireless multimedia sensor networks (WMSNs) must provide relatively high throughput and low end-to-end delay and jitter while being energy-efficient. In view of these challenges, error control is an important mechanism which enables us to provide robust and high quality multimedia communication in WSNs. In this thesis, we first perform a comprehensive performance evaluation of different error control schemes for multimedia communication over WSNs. The results of our analysis show how wireless channel errors can affect the performance... 

    Stability and Stabilization of Fractional Order Linear Time Invariant Swarm Systems

    , Ph.D. Dissertation Sharif University of Technology Naderi Soorki, Mojtaba (Author) ; Tavazoei, Mohammad Saleh (Supervisor)
    Abstract
    In this thesis, stability and stabilization of fractional-order linear time invariant swarm systems are studied. In recent years it has been proved that the exact model of dynamic agents in most of the swarm systems can be modeled more accurate by fractional order differential equations. Stating the motivation of choosing this subject, the achievements of the thesis can be divided into two general parts: Investigating the stability of fractional-order swarm systems and how to stabilize such systems. After introducing the fractional-order systems and fractional-order model of swarm systems in the introduction part, the literature review is presented in Chapter 2. In Chapter 3 the results... 

    Numerical Methods for Approximation and Visualization of Invariant Manifolds in Dynamical Systems

    , M.Sc. Thesis Sharif University of Technology Naderi Yeganeh, Hamid (Author) ; Razvan, Mohammad Reza (Supervisor)
    Abstract
    Invariant manifolds are important objects in the theory of dynamical systems. The stable manifold theorem is a very important theorem about this concept which proves the existence of stable and unstable manifolds in a wide range of dynamical systems. The importance of invariant manifolds encourages us to view their pictures. It helps us to understand their bahavior. For this purpose, at first we need to approximate the invariant manifold we want to visualize. There are several algorithms designed to approximate invariant manifolds. Those algorithms approximate a set of points on an invariant manifold and then provide an approximation of the manifold by the calculated points. Visualizing an... 

    Mechanical Simulation of Corneal Ring Implant Surgery for Keratoconus Treatment Considering Tissue Collagen Structure

    , M.Sc. Thesis Sharif University of Technology Naderi Eshkaftaki, Mohammad Reza (Author) ; Asghari, Mohsen (Supervisor)
    Abstract
    Keratoconus is one of the most common optical (visual, eye) diseases that usually occurs in youth or early third decade of life. In this disease, cornea gets thin and loses it initial shape and becomes conical. Doctors use different methods for its treatment including use of glasses, contact lenses (hard or soft), cornea transplantation and also cross linking of cornea. Each of these methods have their limitations, on the other hand, considering that this disease progresses and intensifies, ophthalmologists use corneal ring implant surgery for the treatment of this disease in its advanced levels. A good ring implant in corneal causes increased strength and also cause corneal to get back to... 

    Development of a Computer Code for Thermo Hydraulics Analysis of Prismatic High Temperature Gas Cooled Reactors

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Hossein (Author) ; Ghofrani, Mohammad Bagher (Supervisor) ; Jafari, Jalil (Supervisor)
    Abstract
    A prismatic high temperature gas-cooled reactor (HTGR), which is a graphite moderated, helium-cooled reactor, is a promising candidate for next generation nuclear power plant in that it enables applications, such as hydrogen production or process heat for petrochemical by supplying heat with core outlet temperatures as high as 1000°C. A Thermal Hydraulic Analysis Code (THAC) for gas-cooled reactors has been developed. THAC implicitly solves heat transfer equation of fuel, graphite block and helium. Three types of fuel pins were considered; solid fuel pin, fuel pins with inside holes and annular fuels with coolant flow from its inside and outside surfaces. THAC predicts axial and radial... 

    Generating Mutants for User Interface Testing in Web-based Applications

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Javad (Author) ; Mirian Hosseinabadi, Hassan (Supervisor)
    Abstract
    In recent years, the user interface of web-based applications has become more and more complicated. Various technologies, architectures, and tools are being used to create a modern user interface. Users interact directly with the user interface, so its functionality has a significant impact on their satisfaction and it is required to design special test suites for the user interface. Furthermore, we need a method to measure the quality and effectiveness of test suites. An effective test suite is a test suite which is able to detect real faults. But this definition is ambiguous, and hence, not practical. A method called Mutation Testing solves this problem and instead of real faults, uses... 

    Mobile Location Determination Using Power of Arrivals

    , M.Sc. Thesis Sharif University of Technology Mehdizadeh Naderi, Ali (Author) ; Manzuri Shalmani, Mohammad Taghi (Supervisor)
    Abstract
    Today, communication sciences are advancing very rapidly; one of these advances is mobile location determination, means finding position of a mobile station. there are some method to location determination; one of these methods is Signal Strength (Power of Arrivals); In this research, Mobile Location Determination using Signal strength measurements in a Location grid will be describe; In this method there is a Mobile Location Server (MLS); In MLS, there re comparable records in database which have been collected from Location grid. When a MS needs to be located, its signaling data (fingerprint) is transmitted to MLS; In MLS, the fingerprints are compared to Data which is store in signature... 

    A Unified Fve-Ale Approach to Solve Unsteady Laminar to Turbulent Flow on Moving Boundary Domains

    , Ph.D. Dissertation Sharif University of Technology Naderi, Alireza (Author) ; Darbandi, Masoud (Supervisor) ; Taeibi Rahni, Mohammad (Supervisor)
    Abstract
    In this study, an arbitrary Lagrangian-Eulerian (ALE) approach is incorporated with a mixed finite- volume-element (FVE) method to establish a novel moving boundary algorithm to simulate unsteady incompressible flow on non-stationary meshes. The method collects the advantages of both finite-volume and finite-element methods as well as the ALE approach in a unified algorithm capable of solving laminar, transient, and turbulent flows in fluid flow problems with moving boundaries. To enhance the robustness of the extended algorithm, we treat the convection terms at the cell faces using a physical influence upwinding scheme, while the diffusion terms are treated using bilinear finite-element... 

    Investigation of Effect of Tool Geometry on Microstructure and Mechanical Properties of Stir Lap Welded Aluminum Alloy 5456

    , M.Sc. Thesis Sharif University of Technology Naderi, Mohammad Reza (Author) ; Kokabi, Amir Hossein (Supervisor) ; Ekrami, Ali Akbar (Supervisor)

    Investigation of partial discharge propagation and location in multiple-α and single- α transformer windings using optimized wavelet analysis

    , Article Iranian Journal of Science and Technology, Transaction B: Engineering ; Volume 30, Issue 6 , 2006 , Pages 655-666 ; 03601307 (ISSN) Salay Naderi, M ; Vakilian, M ; Blackburn, T. R ; Phung, T. B ; Salay Naderi, M ; Sharif University of Technology
    2006
    Abstract
    Partial discharges (PD) are recognized as the main cause of the inner insulation deterioration process in power transformers. Therefore, the optimum inner insulation design is one of the challenges a transformer designer is faced with. Transformer strength, especially during transient conditions, is a criterion for transformer insulation designers. This challenge has made designers initiate and employ other types of winding, for example, rather than ordinary layer and disc windings employ the multiple-α windings. Multiple-α windings have a more complicated structure and are comprised of various parts with different physical structures and electrical characteristics. Typical partial discharge... 

    Permutation flowshops in group scheduling with sequence-dependent setup times

    , Article European Journal of Industrial Engineering ; Volume 6, Issue 2 , 2012 , Pages 177-198 ; 17515254 (ISSN) Naderi, B ; Salmasi, N ; Sharif University of Technology
    2012
    Abstract
    This paper focuses on the flow shop sequence dependent group scheduling (FSDGS) problem with minimisation of total completion time as the criterion (Fm|f mls, prmu, S plk|ΣC j). The research problem is formulated in form of two different mixed integer linear programming (MILP) models. Comparing with the latest MILP model for the proposed problem in the literature, the complexity size of the proposed models are significantly reduced. One of the proposed mathematical models is so effective that even medium-sized instances (problems up to 60 jobs in all groups) are solved to optimality in a reasonable amount of time. Moreover, a metaheuristic hybridising genetic and simulated annealing... 

    Nickel molybdate nanorods supported on three-dimensional, porous nickel film coated on copper wire as an advanced binder-free electrode for flexible wire-type asymmetric micro-supercapacitors with enhanced electrochemical performances

    , Article Journal of Colloid and Interface Science ; Volume 542 , 2019 , Pages 325-338 ; 00219797 (ISSN) Naderi, L ; Shahrokhian, S ; Sharif University of Technology
    Academic Press Inc  2019
    Abstract
    Wire-shaped micro-supercapacitors attracted extensive attentions in next-generation portable and wearable electronics, due to advantages of miniature size, lightweight and flexibility. Herein, NiMoO 4 nanorods supported on Ni film coated Cu wire are successfully fabricated thorough direct deposition of Ni film onto Cu wire as the conductive substrate, followed by growth of the NiMoO 4 nanorods on Ni film coated Cu wire substrate by means a hydrothermal annealing process. The prepared 3D, porous electrode demonstrates extremely high areal specific capacitance of 12.03F cm −2 at the current density of 4 mA cm −2 and retained capacitance of 8.23 F cm −2 at a much higher current density of 80... 

    Nickel vanadium sulfide grown on nickel copper phosphide dendrites/Cu fibers for fabrication of all-solid-state wire-type micro-supercapacitors

    , Article Chemical Engineering Journal ; Volume 392 , 15 July , 2020 Naderi, L ; Shahrokhian, S ; Sharif University of Technology
    Elsevier B.V  2020
    Abstract
    Herein, we have successfully fabricated NiVS/NiCuP nanostructures on Cu wire as a fiber electrode for high performance FSMSCs applications. The 3D NiCuP dendritic film was firstly deposited on Cu wire through the electrodeposition method, which not only act as a scaffold for deposition of the electroactive materials (NiV-LDH and NiV-S), but also served as a micro-porous current collector, supplied extra capacitances. Then, NiV-LDH nanosheets grown on 3D NiCuP film were obtained using a hydrothermal method. The sulfidation of NiV-LDH is carried out through an ion-exchange reaction of OH– with S2– to obtain NiVS, which maintains an ultrathin and porous structure, improves the electrical... 

    Cobalt vanadium chalcogenide microspheres decorated with dendrite-like fiber nanostructures for flexible wire-typed energy conversion and storage microdevices

    , Article Nanoscale ; Volume 14, Issue 25 , 2022 , Pages 9150-9168 ; 20403364 (ISSN) Naderi, L ; Shahrokhian, S ; Sharif University of Technology
    Royal Society of Chemistry  2022
    Abstract
    The increasing energy demand for next-generation portable and miniaturized electronics has drawn tremendous attention to develop microscale energy storage and conversion devices with light weight and flexible characteristics. Herein, we report the preparation of flower-like cobalt vanadium selenide/nickel copper selenide (CoVSe/NiCuSe) microspheres with three-dimensional hierarchical structure of micropore growth on copper wire for a flexible fiber microsupercapacitor (microSC) and overall water splitting. The CoV-LDH microspheres are anchored on the dendrite-like NiCu nanostructured Cu wire using a hydrothermal method (CoV-LDH/NiCu@CW). The sulfidation and selenization of CoV-LDH/NiCu was... 

    Examining the effect of moderating variables on autonomous public van acceptance model (APVAM)

    , Article PLoS ONE ; Volume 18, Issue 8 August , 2023 ; 19326203 (ISSN) Naderi, H ; Nassiri, H ; Sharif University of Technology
    Public Library of Science  2023
    Abstract
    Autonomous vehicles (AVs) will soon become the primary means of transportation for millions of people. However, the introduction of these vehicles may lead to increased traffic and changes in people’s travel patterns. To address this issue, one solution is to promote the use of AVs in a shared and public manner. However, the success of this approach depends on public acceptance of public AVs. If the promoters of public AVs are unaware of how people perceive this technology, it is possible that these vehicles will face failure in the market. Therefore, this paper aims to identify the factors that influence the willingness to use public AVs. To achieve this, an autonomous public van acceptance... 

    How will Iranian behave in accepting autonomous vehicles? Studying moderating effect on autonomous vehicle acceptance model (AVAM)

    , Article IATSS Research ; Volume 47, Issue 4 , 2023 , Pages 433-446 ; 03861112 (ISSN) Naderi, H ; Nassiri, H ; Sharif University of Technology
    Elsevier B.V  2023
    Abstract
    The primary condition for society to benefit from autonomous vehicle (AV) advantages is the acceptance of these vehicles by people. In this regard, the factors which affect the acceptance of these vehicles among different countries should be identified. In previous studies, a major focus has been on developing autonomous vehicle acceptance models, neglecting the moderating variables' effect on these models. The main aim of this research is to investigate the effect of moderating variables including demographic characteristics, psychological characteristics, traffic experience collision, and travel/driving behavior on the autonomous vehicle acceptance model (AVAM). The AVAM was developed via...