Sharif Digital Repository

The growing rate of population and technological advancement have led to an increase in natural resource consumption, which has caused irreparable damage to the environment. The implementation of green supply chain management is one of the most effective ways to deal with environmental degradation. Therefore, in this paper, a bi-objective mixed integer linear programming model is developed to design a green supply chain network. In the proposed model, the possibility of customer storage, being faced with shortage, locating of distribution centres, green vehicle routing problem, split delivery, multi-depot vehicle routing problem (VRP), capacitated VRP, and uncertainty in demands will be... 

Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier... 

Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier... 

The thermal behavior of Fe3Si2O5(OH)4·Sb3O6(OH)·Sb2O3 (a sample of antimony from Sefidabe mine in Zahedan) was investigated by the technique of thermogravimetry under air atmosphere from 25 to 1200 °C. The obtained results from TGA were reported. This study reports comprehensive information about these minerals. XRD and XRF techniques, UV/visible and elemental analysis such as ICP are used to identify the products at different decomposition steps. The acidic leaching of this mineral Fe3Si2O5(OH)4·Sb3O6(OH)·Sb2O3 is carried out, and the obtained results are reported. In total, the recovery was achieved by leaching with hydrochloric acid was 85% at D80 granulation below 45 microns. In leaching... 

In the eld of supply chain, selecting a suitable green supplier could signi cantly help us decrease the cost and risks of the operations and increase the quality of green supply. This paper develops an integrated two-stage approach based on Fuzzy Analytic Hierarchy Process (FAHP) and multi-objective mixed-integer linear programming to select suppliers and allocate order in the green supply chain. In the rst stage, suppliers are evaluated using FAHP method and in the second stage, a multi-product multi-period supply chain is developed considering green location-routing problem, discounting, and time window under uncertainty. Then, a fuzzy solution approach is applied to solve the proposed... 

The increasing level of customer awareness and application of environmental laws by governments, on the one hand, and the increasing number of competitors, on the other hand, has obliged industry owners to include green activities in the design of the supply chain network. Green activities include any type of action that reduces environmental degradation. Hence, this study seeks to develop a bi-objective, mixed integer linear programming (MILP) model for designing a green supply chain network. In the proposed model, the minimisation of costs and detrimental environmental effects are discussed. LP metric method is used to solve the bi-objective model and the proposed model is run by using... 

This paper presents a new solution framework to locate the workstations in the tandem automated guided vehicle (AGV) systems. So far, the research has focused on minimizing the total flow or minimizing the total AGV transitions in each zone. In this paper, we focus on minimizing total cumulative flow among workstations. This objective allocates workstations to an AGV route such that total waiting time of workstations to be supplied by the AGV is minimized. We develop a property which simplifies the available mathematical formulation of the problem. We also develop a heuristic algorithm for the problem. Computational results show that our heuristic could yield very high-quality solutions and... 

Linear-dendritic triblock copolymers of linear poly(ethylene glycol) and hyperbranched poly(citric acid) (PCA-PEG-PCA) were used as the reducing and capping agents to encapsulate gold and silver nanoparticles (AuNPs and AgNPs). PCA-PEG-PCA copolymers in four different molecular weights were synthesized using 2, 5, 10 and 20 citric acid/PEG molar ratios and were called A 1, A 2, A 3 and A 4, respectively. Nanoparticles were encapsulated simultaneously during the preparation process. AuNPs were simply synthesized and encapsulated by addition a boiling aqueous solution of HAuCl 4 to aqueous solutions of A 1, A 2, A 3 and A 4. In the case of silver, an aqueous solution of AgNO 3 was reduced... 

Linear-dendritic ABA triblock copolymers containing poly(ethylene glycol) (PEG) as B block and hyperbranched poly(citric acid) (PCA) as A blocks were synthesized through polycondensation. The molecular self-assembly of synthesized PCA-PEG-PCA copolymers in water led to formation of nanoparticles and fibers in different sizes and shapes depending on the time and size of PCA blocks. Ten days after dissolving PCA-PEG-PCA copolymers in water, the size of fibers had reached several millimeters. Mixing a water solution of fluorescein as a small guest molecule and PCA-PEG-PCA copolymers led to the encapsulation of fluorescein by products of molecular self-assembly. To investigate their potential... 

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl4 to aqueous solutions of A1, A2 and A3. Supported AuNPs... 

In this paper, a novel travelling-wave printed Frequency Scanning Antenna (FSA), which can be used for imaging purposes, is proposed. All sample designs scan the space symmetrically about the broadside direction. For different scanning ranges, two low profile antennas are designed on a 6.6 mils thick Rogers 4350 board substrate layer. Impedance bandwidth of the first one covers 6.5GHz, from 29.5GHz to 36GHz, and this antenna scans 56° in angular space. The second antenna has 5.6GHz bandwidth from 30.6GHz to 36.2GHz, and scans 98° in angular space by means of switching the input port. The average gain and the Side-lobe level (SLL) of the first and the second antennas are 11.46dBi, 12.8dB, and... 

In this study, biocompatible ceramic layers containing TiO2 and hydroxyapatite (HA) nanoparticles (TiO2/HA) were deposited on pure commercial titanium (Grade 2) by using plasma electrolytic oxidation and AC power supply. The coating process was carried out in five different solutions for various times at a current density of 500 mA cm−2. To achieve the optimum conditions for thickness and microstructure, the coating process was conducted in solutions with a 3 g L−1 concentration of HA nanoparticles. FESEM, XRD, and FTIR results showed that HA nanoparticles were successfully incorporated into the pores of the layer. Furthermore, the corrosion behavior of the coating layers in the simulated...