Sharif Digital Repository

Purpose – This paper aims to clarify the corrosion behavior of two famous structural steels in sour environment. These steels have a vast application in oil and gas industries. The study aims to find the effect of different concentrations of sour solution on the origin of crack in these steels. Design/methodology/approach – After preparation of specimens, different sour solutions were made using the synthetic brine (according to National Association of Corrosion Engineers [NACE], Technical Committee Report 1D182) and various amounts of Na2S.9H2O and CH3COOH. The polarization test was done by Potansiostat apparatus model Zahner-IM6 at two temperatures, 25°C... 

The objective of this work was to study the influence of titanium on API 5L-X70 steel weld metal properties at manganese levels of 1.4 and 2%. The best mechanical properties in the weld series were obtained in two compositions, i.e. 1.92%Mn-0.02%Ti and 1.40%Mn-0.08%Ti. In both groups of welds, acicular ferrite in the microstructure was increased with addition of titanium in the range of 0.02-0.08%. Manganese helped to refine and homogenize weld microstructures. Increased hardenability of the weld due to further addition of titanium or manganese encouraged grain boundary nucleation of bainite with greater frequency than intragranular nucleation of acicular ferrite. Also, the amount of... 

Waveform design for target identification and classification in multiple-input multiple-output (MIMO) radar systems has been studied in several recent works. In previous works, optimal signals for an estimation algorithm are found assuming that only signal- independent noise exists. This work extends previous research by studying the case where clutter is also present. We develop a procedure to design the optimal waveform which minimizes estimation error at the output of the minimum mean squared error (MMSE) estimators in two scenarios. In the first one different transmit antennas see uncorrelated aspects of the target, and we consider the correlated target aspects in the second one.... 

Waveform design for Target identification and classification in MIMO radar systems has been studied in several recent works. While the previous works considered signal independent noise and found optimal signals for an e stimation algorithm, here we extend the results to the case where clutter is also present and then we will find the optimum waveform for several estimators differing in the assumptions on the given statistics. Several different approaches to the optimal waveform design are proposed, including minimizing the error of MMSE estimator, minimizing the maximum error of the covariance shaping least square (CSLS) estimator and minimizing the MSE error of scaled least square (SLS)... 

Waveform design for Target identification and classification in MIMO radar systems has been studied in several recent works. While the previous works considered signal independent noise and found optimal signals, here we extend the results to the case where clutter is also present and then we will find the optimum waveform for MMSE estimator. Choosing optimal waveform for MMSE estimator leads to the Semidefinite programming (SDP) problem, a convex optimization problem which can be efficiently solved through numerical methods. Explicit solution is developed for this SDP problem in two cases .In the first case, target and clutter covariance matrices are jointly diagonalizable and in the second... 

The microstructural characteristic of HSLA welds containing different amounts of titanium were evaluated carefully. It was observed that the microstructure of welds consisted of ferrite with mixed morphologies, and small amounts of pearlite and martensite-austenite micro-constituents. Because of insufficient time for diffusion of carbon, formation of pearlite lamellae could not be completed in the weld region. Martensite was formed from carbon enrichment of austenite during nucleation and growth of acicular ferrite and bainitic ferrite. While coarse manganese sulfide particles had weak interface strength with matrix and formed some micro-fissures; increasing titanium amount of welds... 

Hydrogen-induced cracking (HIC) and sulfide stress cracking (SSC) susceptibility of the submerged arc welded API 5L-X70 pipeline steel with different amounts of titanium at two levels of manganese (1.4% and 2%) were studied. The centerline segregation region (CSR) observed in the X70 pipe steel played an important role in the HIC susceptibility. Increased acicular ferrite content in the microstructure improved HIC resistance and SSC resistance, while bainite and martensite/austenite constituents deteriorated the workability of the welded specimens in sour environments. The 2% Mn-series welds showed higher SSC susceptibility than the 1.4% Mn-series welds due to the higher hardness values of... 

The effect of titanium addition on the SAW weld metal microstructure of API 5L-X70 pipeline steel was investigated. The relationship between microstructure and toughness of the weld deposit was studied by means of full metallographic, longitudinal tensile, Charpy-V notch and HIC tests on the specimens cut transversely to the weld beads. The best combination of microstructure and impact properties was obtained in the range of 0.02-0.05% titanium. By further increasing of titanium content, the microstructure was changed from a mixture of acicular ferrite, grain-boundary ferrite and Widmanstätten ferrite to a mixture of acicular ferrite, grain-boundary ferrite, bainite and ferrite with M/A... 

A major problem in a multiple output converter structure is the different power flow via its various outputs. This problem leads to unwanted input DC-link voltage. This paper studies full bridge based DC-DC converters with multiple outputs. The effect of power flow variation is studied and a regenerative converter topology which controls the DC-link voltage by space voltage vector modulation technique is proposed. The proposed converter has a fast response to control the DC-link voltage in an acceptable band. Simulation and experimental results are presented to verify the analytical studies. © 2018 IEEE  

Dimension reduction techniques for text documents can be used for in the preprocessing phrase of blog mining, but these techniques can be more effective if they deal with the nature of the blogs properly. In this paper we propose a novel algorithm called PostRank using shallow approach to identify theme of the blog or blog representative words in order to reduce the dimensions of blogs. PostRank uses a graph-based syntactic representation of the weblog by taking into account some structural features of weblog. At the first step it models the blog as a complete graph and assumes the theme of the blog as a query applied to a search engine like Google and each post as a search result. It tries... 

Waveform design for target identification and classification in MIMO radar systems has been studied in several recent works. While the previous works assumed that the noise was independent of the transmission signals, here we extend the results to the signal dependent noise (clutter). We consider two scenarios. In the first scenario it is assumed that different transmit antennas see uncorrelated aspects of the target. In the second scenario, we consider the correlated target. As clutter is dependent to signal, target estimation error cannot vanish only by increasing the transmission power. It can be shown that in the second scenario, MIMO radar receiver can nullify the clutter subspace.... 

The objective of this work was to study the influence of titanium variations on the API 5L-X70 steel weld metal properties. The relationship between microstructure and toughness of the weld deposit was studied by means of full metallographic, longitudinal tensile and Charpy-V notch tests on the specimens cut transversely to the weld beads. The best combination of microstructure and impact properties was obtained in the range of 0.02-0.05% titanium. By further increasing of titanium content, the microstructure was changed from a mixture of acicular ferrite, grain-boundary ferrite, Widmanstätten ferrite to a mixture of acicular ferrite, grain-boundary ferrite, bainite and ferrite with M/A... 

Hydrogen diffusion into steel can embrittle the material in H2S environments, but this effect can be offset by suitable hydrogen trapping sites in the microstructure. Fine Ti(C,N) inclusions have been studied as the trapping sites in high strength low alloy (API X-70) welds, with Ti additions ranging from 0.004 to 0.16 wt.%. The trapping sites were investigated by electron microscopy and thermal desorption spectroscopy. Manganese sulphide particles were the main initiation sites for hydrogen induced cracking as expected. The optimum Ti addition was around 0.02% with no evidence of cracking in the weld. The estimated values of trapping activation energy for dislocations, microvoids, MnS and... 

Nanosecond pulsed-power generators have many applications in industries. As the rise time and fall time of conventional semiconductor switches are usually more than a few nanoseconds, it is necessary to employ special switches or new pulse generating methods to achieve nanosecond pulses. A common method for producing narrow pulse voltage waveforms is using the reverse recovery process of diodes. In this method, a super fast recovery diode is used as an opening switch in an inductor current path. A drift step recovery diode can form a rapid cut-off current front; Hence this method can be an effective solution to generate narrow pulses. This paper describes an investigation about the effect of... 

Traumatic brain injury (TBI) has long been known as one of the most anonymous reasons for death around the world. A presentation of a model of what happens in the process has been under study for many years; and yet it remains a question due to physiological, geometrical and computational complications. Although the facilities for soft tissue modeling have improved and the precise CT-imaging of human head has revealed novel details of brain, skull and the interface (the meninges), a comprehensive FEM model of TBI is still being studied. This study aims to present an optimized model of human head including the brain, skull, and the meninges after a comprehensive study of the previous models....