Sharif Digital Repository

Much attention has been directed to different aspects of the design of pipelines. Design of the control logic of non-linear pipelines has however, been considered as a subsidiary issue in that an RTL description for such logic can easily be obtained from a behavioral description, with the use of widely available synthesis tools. But, as the complexity of a non-linear pipeline increases, so does the complexity of the control logic. The complexity may be to an extent that obtaining even a behavioral description for the control logic is rendered difficult. This paper focuses on further automating the development of systems consisting of non-linear or multi-function pipelines by proposing an... 

In this study, the performance of virtual cut-through switching in the cube-based OTIS architecture, an optoelectronic interconnection architecture for multicomputer systems, is empirically analyzed. Deadlock-free deterministic and adaptive minimal path routing algorithms for this architecture are introduced, and the effects of different network and traffic parameters on average message latency are investigated. This analysis presents a relatively more realistic view of the OTIS architecture than that presented in previous work by considering issues related to a lower level of abstraction (the routing and switching of messages). Among other results, the analysis indicates that depending on... 

In this paper, routing properties of cube-based optoelectronic OTIS networks are explored. We show emulations of various cubical network topologies on their OTIS augmented variants, including the nD grid networks, shuffle-exchange, and de Brujin networks. An analytical performance model for OTIS-cube networks is proposed. The model is validated by means of comparison with rigorously obtained simulation results. Using this model, the performance characteristics of the OTIS-hypercube network are evaluated in view of a number of different constraints. Moreover, we compare the performance characteristics of the OTIS-hypercube with that of equivalent fully-electronic networks under various... 

The ability to perform multicast communication efficiently in parallel computing systems is increasingly becoming an essential feature of these systems. Therefore, any emerging parallel architecture must be able to provide effective multicasting performance. OTIS-based multi-computer systems are parallel systems that efficiently exploit optical connections between distant nodes, while using electronic connections for physically close processors. No previous work has attempted to determine an optimal multicast communication scheme for OTIS networks. This paper presents two approaches to implement efficient multicast communication in wormhole-routed OTIS networks, for the two different... 

In optoelectronic OTIS architectures, electrical and optical interconnects are used for local and global communication, respectively. Interesting instances of the OTIS architecture are the OTIS-hypercube and OTIS-mesh. This paper conducts a performance evaluation and comparison of these networks under different structural conditions and traffic loads. All judgments made, are based on observations from extensive simulation results of the interconnection networks. We conclude that, when the OTIS-hypercube and equivalent 2-D OTIS-mesh are compared under the constraint of equal bisection bandwidth, the performance of the OTIS-hypercube is of superior performance. We however show that the... 

Traffic safety policies are still conventionally ranked on financial and environmental criteria in developing countries, yet the equity concept can be advantageously used as an integral part of the process of traffic safety policy making. Equity in transportation is defined as how appropriately and equally the impacts of transportation are distributed among different types of users. The main contribution of this research is to introduce traffic safety equity in transportation policy making. The authors advocate for a modeling framework that considers traffic safety equity as a focal point. The analytical network process overcomes the drawbacks of data intensive models that are so difficult... 

We investigate large wireless networks subject to security constraints. In contrast to point-to-point, interferencelimited communications considered in prior works, we propose active cooperative relaying-based schemes. We consider a network with nl legitimate nodes, ne eavesdroppers, and path loss exponent α ≥ 2. As long as n2e (log(ne))γ = o(nl ), for some positive γ , we show that one can obtain unbounded secure aggregate rate. This means zero-cost secure communication, given fixed total power constraint for the entire network. We achieve this result through: 1) the source using Wyner randomized encoder and a serial (multi-stage) block Markov scheme, to cooperate with the relays and 2) the... 

Investigating the impact of geological uncertainty (i.e., spatial distribution of fractures) on reservoir performance may aid management decisions. The conventional approach to address this is to build a number of possible reservoir models, upscale them, and then run flow simulations. The problem with this approach is that it is computationally very expensive. In this study, we use another approach based on the permeability contrasts that control the flow, called percolation approach. This assumes that the permeability disorder of a rock can be simplified to either permeable or impermeable. The advantage is that by using some universal laws from percolation theory, the effect of the complex... 

Recently, a new class of binary codes for overloaded CDMA systems are proposed that not only has the ability of errorless communication but also suitable for detecting active users. These codes are called COWDA. In [1], a Maximum Likelihood (ML) decoder is proposed for this class of codes. Although the proposed scheme for coding/decoding shows impressive performance, the decoder can be significantly improved. In this paper, by assuming practical conditions for the traffic in the system, we suggest and prove an algorithm that increases the performance of the decoder several orders of magnitude (the Bit-Error-Rate (BER) is divided by a factor of about 400 in some E b/N0's). The algorithm... 

In this paper we present new methods to estimate the effective permeability (keff) of heterogeneous porous media with a wide distribution of permeabilities and various underlying structures, using percolation concepts. We first set a threshold permeability (kth) on the permeability density function and use standard algorithms from percolation theory to check whether the high permeable grid blocks (i.e., those with permeability higher than kth) with occupied fraction of “p” first forms a cluster connecting two opposite sides of the system in the direction of the flow (high permeability flow pathway). Then we estimate the effective permeability of the heterogeneous porous media in different... 

It has long been understood that flow behavior in heterogeneous porous media is largely controlled by the continuity of permeability contrasts. With this in mind, we are looking in new methods for a fast estimation of the effective permeability which concentrates on the properties of the percolating cluster. From percolation concepts we use a threshold permeability value (Kth) by which the gridblocks with the highest permeability values connect two opposite side of the system in the direction of the flow. Those methods can be applied to heterogeneous media of a range of permeabilities distribution and various underlying structures. We use power law relations and weighted power averages that... 

Indium tin oxide (ITO) thin films have been deposited using RF sputtering technique at different pressures, RF powers, and substrate temperatures. Variations in surface morphology, optical properties, and film resistances were measured and analyzed. It is shown that a very low value of sheet resistance (1.96 ω/sq.) can be achieved with suitable arrangement of the deposition experiments. First, at constant RF power, deposition at different pressure values is done, and the condition for achieving minimum sheet resistance (26.43 ω/sq.) is found. In the next step, different values of RF powers are tried, while keeping the pressure fixed on the previously found minimum point (1-2 Pa). Finally,... 

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H2), with and without carbon dioxide (CO2) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool "Aspen Plus". The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO2 emission. The effect of air... 

Single-crystal hydroxyapatite (HAp) nanorods and nanogranules have been synthesized successfully by a mechanochemical process using two distinct experimental procedures. The experimental outcomes are characterized by transmission electron microscopy (TEM), and powder X-ray diffraction (XRD) techniques. In this work, the feasibility of using polymeric milling media to prepare hydroxyapatite nanoparticles is described. The resulting hydroxyapatite powder exhibits an average size of about 20 to 23 nm. Final results indicate that the proposed synthesis strategy provides a facile pathway to obtain single-crystal HAp with high quality and suitable morphology. © 2008 Elsevier B.V. All rights... 

Migration to the cloud has been a popular topic in industry and academia in recent years. Despite many benefits that the cloud presents, such as high availability and scalability, most of the on-premise application architectures are not ready to fully exploit the benefits of this environment, and adapting them to this environment is a non-trivial task. Microservices have appeared recently as novel architectural styles that are native to the cloud. These cloud-native architectures can facilitate migrating on-premise architectures to fully benefit from the cloud environments because non-functional attributes, like scalability, are inherent in this style. The existing approaches on cloud... 

Estimating available hydrocarbon to be produced during secondary oil recovery is an ongoing activity in field development. The primary plan is normally scheduled during early stage of field's life through master development plan studies. During this period, due to the lake of certain data, estimation of the field efficiency is usually based on rules of thumb and not detailed field characterization. Hence, there is a great motivation to produce simpler physically-based methodologies. The minimum necessity inputs of percolation approach make it a useful tool for foration performance prediction. This approach enables us to attain a better assessment of the efficiency of secondary recovery... 

Development of reliable and accurate models to estimate carbon dioxide–brine interfacial tension (IFT) is necessary, since its experimental measurement is time-consuming and requires expensive experimental apparatus as well as complicated interpretation procedure. In the current study, feed forward artificial neural network is used for estimation of CO2–brine IFT based on data from published literature which consists of a number of carbon dioxide–brine interfacial tension data covering broad ranges of temperature, total salinity, mole fractions of impure components and pressure. Trial-and-error method is utilized to optimize the artificial neural network topology in order to enhance its...